Powertech Co R9P125, R9P602 User Manual

The information contained herein is subject to change without notice.

This document contains proprietary information, which is protected by copyright.

April 2010

into another language without the prior written consent.

No part of this document may be photocopied, reproduced, or translated

All Versions

User Manual

R9P014 / R9P125 / R9P602

GREEN POWERLINK

Surge Protecting Solution

Smart Energy Monitoring &

Thank you for purchasing the GREEN POWERLINK Energy Saving Solution, an

innovative product which is designed to manage home electricity usage efficiently

and reduce home electricity bill.

In an effort to reduce your electricity bills, why not first check out what appliance

uses most energy in your home.

The New GREEN POWERLINK Energy Monitor allows you to take control of home

electricity usage while saving you money in the process.

With GREEN POWERLINK, you can see how much electricity you are using and

with greater awareness you’ll become more energy efficient.

Fully educated with the critical energy information, you are naturally motivated to

adopt new energy saving habits and reduce harmful carbon emission for our

environment.

Besides energy conservation, the GREEN POWERLINK surge protectors are also

equipped with fireproof Surge MOV technology and this ensures your home

appliances are well protected and free of fire hazard during catastrophic surge

events.

The GREEN POWERLINK is the total solution for green inspiration, energy

REEN POWERLINK Manual All Versions V1.0

conservation, and surge protection for your everyday life.

INTRODUCTION----------------------------------------------------- 2

FEATURES AND FUNCTIONS---------------------------------------- 3

INSTALLATION------------------------------------------------------ 8

Wireless Setup Range-------------------------------------------- 8

Install Wall Tap Surge Protector---------------------------------- 8

Install Strip Surge Protector------------------------------------- 8

INITIAL SETUP------------------------------------------------------ 9

Install Battery in Energy Monitor--------------------------------- 9

Use an AC/DC Adapter (Optional)--------------------------------- 10

Wall Mount the Energy Monitor-----------------------------------10

Perform Energy Monitor Initial Setup-----------------------------10

Date & Time Setup----------------------------------------------------- 10

Currency Setup---------------------------------------------------------12

Electricity Rate Setup---------------------------------------------------12

Carbon Emission Setup-------------------------------------------------13

Audible Alarm Setup----------------------------------------------------14

OPERATION--------------------------------------------------------- 14

Energy Monitor Display Mode------------------------------------ 14

Channel Mode (Default page)------------------------------------------ 15

Energy Mode----------------------------------------------------------- 16

Cost Mode-------------------------------------------------------------- 17

CO2 Mode-------------------------------------------------------------- 18

Event Mode-------------------------------------------------------------18

Surge Alert Mode-------------------------------------------------------20

Advance Setup Instruction------------------------------------------ 23

Delete Event Data Setup------------------------------------------23

Delete Surge Event Data Setup----------------------------------- 24

Delete History Data Setup---------------------------------------- 24

Exit the Setup Page---------------------------------------------- 25

Add Channels to the Energy Monitor by Learning------------------ 25

Reset the Energy Monitor to Factory Default----------------------- 26

REEN POWERLINK Manual All Versions V1.

915MHz

Up to 100 Ft

Yes

Control Energy Saver

Radio Frequency 915MHz

Smart Energy Monitor Specification

Wireless Range

Yes

outlets ON/OFF

Audible Alarm Alert

Up to 9 Channels

Channels control

and monitoring

Functions

Yes

Learning Function

Yes

Wall Mountable

45mm x 55mm

AA Battery X4

LCD Dimension

Replaceable Battery

9V / 1000 mA

5℃~45℃ at 85% relative humidity

DC Input

Operating Temperature

ions V1. e

ERLINK Manual All

REEN PO

Series

11. Projected and historical data display

12. Clock display

13. Measurement units for display modes

14. Surge event counter display

15. Embedded alarm speaker

16. Cursor selector Key

R9P014

17. MODE Key: switch to different

Top View Front View Side View Back View

1. RESET Key: restore factory default

2. LEARNING Key: add new channel

3. Channel indicator

4. Indicates ON/OFF status of

energy saver outlets

5. Power failure event indicator

Smart Energy Monitor Features

6. Indicates audible alarm is ON

SET Key: confirmation button

display mode

18. ON&OFF Key: control energy saver outlet

7. Energy monitor low battery indicator

8. Wireless signal strength indicator

9. Indicates what display mode the

19. AC/DC power adaptor input (Optional)

20. Battery compartment

monitor displays: INSTANT ENERGY /

ENERGY / COST/ CO2

10. Data display

ions V1. e

ERLINK Manual All

REEN P

0 P

sions V1.0

Strip Type Surge Protector Features

Manual ON/OFF Key to turn ON/OFF

-Manual ON/OFF Mode: press the

7. Manual ON/OFF & LEARNING Key

- External antenna for better reception

1. Wireless Antenna

2. AC Power Cord

the energy saver outlets

key to pair up the surge protector with

-Learning Mode: press the LEARNING

at 15 Amps

- Protects against current overload

3. Overload Resettable Circuit Breaker

the energy monitor

- Press to reset the circuit breaker

wirelessly turned ON/OFF by the smart

-The Energy Saver outlets can be

8. 4 “Energy Saver” outlets

surge protection is working

- The lighted green LED indicates the

4. Surge Protection LED Indicator

energy monitor to eliminate stand-by

power waste

-Phone / Data line or Coax protection

9. Secondary Protection (Optional)

indicate the power outlets are not

properly grounded

- The Red LED light only illuminates to

5. Grounded Fault LED Indicator

6. 2 “Always On” outlets

OWERLINK Manual All

GREEN

connected devices

- Provide continuous power for

R9P125 Series R9P602 Series

is working

- The lighted green LED indicates the surge protection

1. Surge Protection LED Indicator

to turn ON/OFF the AC outlet

- Manual ON/OFF Mode: press the Manual ON/OFF Key

2. Manual ON/OFF & LEARNING Key

surge protector with the energy monitor

- Learning Mode: press the LEARNING key to pair up the

3. AC Outlet

- Monitor individual home appliance electricity usage

Wall Tap Surge Protector Features

915MHz

Up to 100 Ft115A / 125V / 1875W

Radio Frequency

Wireless Range

Energy Saver Outlet

Wall Tap Surge Protector Specification

AC Rating

540J

500V

Surge Suppression Rating

Clamping Voltage

Green

Surge Protected LED Indicator

Green

Energy Saver Outlet Power ON LED Indicator

yes

< 1 W

5℃~45℃ at 85% relative humidity

-5℃~60℃ at 85% relative humidity

sions V1.

OWERLINK Manual All

Manual ON/OFF , LEARNING Key

Stand-by Power

Operating Temperature

Storage Temperature

GREEN

Wireless Setup Range

The energy monitor and surge protector communicate in two-way. To ensure

energy monitor and surge protector communicate with no interruption, please

locate and setup both devices within 100 Ft of range.

Install Wall Tap Surge Protector

The single outlet wall tap surge protector allows the user to track electricity

consumption of individual home appliance and protect it against surge and voltage

spikes.

1. Plug in the wall tap surge protector to a powered 125V AC outlet.

2. Plug in the appliance into the wall tap surge protector outlet.

3. The outlet power can be manually turned ON/OFF by pressing the “Manual

ON/OFF” button on the wall tap surge protector. You may also turn ON/OFF the

outlet power remotely by using the energy monitor (see the operating

instruction – channel mode).

Note: The outlet on the surge protector is default at power off status.

Install Strip Surge Protector

The strip type surge protector allows the user to track electricity consumption of

REEN POWERLINK Manual All Versions V1.0

group home appliances by area and protect them against surge and voltage spike.

1. Connect home appliances to the “ENERGY SAVER” outlets. These outlets are for

appliances which do not need to be on all the time and can be completely turned

off when not in use to eliminate stand-by power waste. The “ENERGY SAVER”

outlets can be controlled ON/OFF by remote energy monitor (see the operating

instruction – channel mode).

2. Connect home devices to the “ALWAYS ON” outlets. These outlets are not

switchable and provide continuous power for appliances which always need to

stay on at all time.

915MHz

Up to 100 Ft24

Radio Frequency

Wireless Range

Strip Type Surge Protector Specification

Always On Outlets

15A / 125V / 1875W

Energy Saver Outlets

AC Rating

1080J

400V

Surge Suppression Rating

Clamping Voltage

Green

Red

Green

Yes

Surge Protected LED Indicator

Grounded Fault LED Indicator

Always On LED Indicator

External Antenna

Yes

<1 W

5ƨ~45ƨ at 85% relative humidity

-5ƨ~60ƨ at 85% relative humidity

Manual ON/OFF , LEARNING Key

Stand-by Power

Operating Temperature

Storage Temperature

REEN POWERLINK Manual All Versions V1.

+ 10 hidden pages