印製注意事項APPROVAL 產品編號MODEL＃ : R9P605 & R9P802 Series 共用說明書
包裝形式 (Package Type) : Clam Shell
修改版本 Version#Revision : 1/1
應用軟體Application : Illustrator CS 3
印刷方式 (Process/Spot Colors)
特別色 (Pantone)
印刷紙張(Paper Type) : 80 P 銅版紙
裱浪方式 (Paper Form) :
上光 (Paper Coating) :
印刷方式 : 正1反1
加工方式 : 騎馬釘
印刷尺寸 : 210Ｘ148.5mm
完成尺寸：105Ｘ148.5mm
設計部門 : 產品外觀設計部
設計者 : 鄭汀晴
設計日期 : 98 / 12 / 16
修改日期 :
發稿日期 : 99 / 03 / 02
承認日期 :
勝德國際研發股份有限公司
Powertech Industrial Co., Ltd
10F, No. 407, Chung Shan Rd., Sec2,
Chung Ho City 235 , 23588 Taipei
County, Taiwan
T : +886-2-8221-5588
F : +886-2-8221-5680
E : sales@power-tech.com.tw
CYA N MAGEN TA
PANTONE
YELLOW BLA CK
註解 NOTES :
刀模圖為1 :1尺寸請勿印刷
Die Line are 100% do not print.
USB
SMART SURGE
PROTECTOR
R9P-605
R9P-802
User Manual
All Versions
The information contained herein is subject to change without notice.
© Copyright 2010
This document contains proprietary information, which is protected by copyright.
No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent.
January 2010
TABLE OF CONTENTS
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
INTRODUCTION
Thank you for purchasing the USB Smart Surge Protector, an innovative product
which is designed to reduce both stand-by power waste & energy cost.
INTRODUCTION------------------------------------------------------------- 2
FEATURES------------------------------------------------------------------3
INSTALLATION------------------------------------------------------------- 4
USB TRANSMITTER WIRELESS RANGE------------------------------------ 4
REPLACING USB TRANSMITTER BATTERY--------------------------------- 4
WALL MOUNTING---------------------------------------------------------- 4
CONNECTING INSTRUCTION----------------------------------------------- 5
OPERATION---------------------------------------------------------------- 9
USE USB TRANSMITTER TO CONTROL ENERGY SAVER OUTLETS---------- 9
USING USB TRANSMITTER AS A STAND-ALONE WIRELESS REMOTE------ 10
SURGE PROTECTOR MANUAL ON/OFF AND LEARNING BUTTON----------- 10
SPECIFICATIONS------------------------------------------------------------12
Stand-by power has always been around us. Many consumers often think their
appliance is off. In fact, it is still standing by and still consuming power.
Inspired by Green, the USB Smart Surge System provides easy & efficient way to
manage power outlets and stop stand-by power waste.
The System consists of two parts, USB Transmitter and Surge Protector.
When USB Transmitter is connected to device’s USB port, it detects power in the
USB port and wirelessly controls the “ENERGY SAVER outlets” on the Surge
Protector accordingly.
These conditions are when you turn on the device; USB Transmitter will wirelessly
turn on the “ENERGY SAVER outlets” on the Surge Protector.
When you turn off the device; USB Transmitter will wirelessly turn off the
“ENERGY SAVER outlets” on the Surge Protector. As a result, the stand-by power
waste is efficiently reduced.
The Surge Protector also provides advanced surge protection & power filtration to
protect your electronic equipments from power surges & voltage spikes. And
power filtration cleans the AC contamination and improves the performance of
connected electronic equipments.
The USB Smart Surge Protector makes a great companion for everyday energy
conservation and surge protection
1
2
FEATURES
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
INSTALLATION
USB TRANSMITTER
■ Learning and Grouping capability
- One USB Transmitter can group with multi Surge Protectors by learning
capability.
- Pre-learn the USB Transmitter with Surge Protectors at home and in the
office. Enjoy the convenience of carrying just one pocket size USB
Transmitter to control Surge Protectors at both locations.
■ Stand-alone wireless remote function
- The USB Transmitter can be used as a stand-alone wireless remote to turn
On or Off the “ENERGY SAVER outlets” on the Surge Protector
SURGE PROTECTOR
■ Controlled by the USB Transmitter, the ENERGY SAVER outlets on the Surge
Protector automatically switch On or Off to eliminate unnecessary energy
waste.
■ Advanced Surge Protection protects your electronic equipments from surges
and voltage spikes.
■ EMI/RFI Noise Filtration eliminates the interference and improves the
performance of your electronic equipments.
USB TRANSMITTER WIRELESS RANGE
In open space, the USB Transmitter has a wireless range up to 25 feet* to control
the Surge Protector.
* Actual range may vary depending on environment condition, interference and
building materials.
REPLACING USB TRANSMITTER BATTERY
One 3V CR1632 Lithium battery is included and pre-installed in the USB
Transmitter.
When the button on the Transmitter is pressed, a red LED will illuminate to
indicate that the Transmitter is working and battery is OK.
If the LED light goes very dim or does not illuminate, it is time to replace the
battery*.
＊The only battery can be used in the USB Transmitter is 3V CR1632 flat type Lithium battery.
Battery Replacement
1. There is a notch on both sides of the USB Transmitter.
2. Use a coin, as a lever to twist open the covers.
3. Slide the battery out of holder, and replace the new battery (+ Positive upward)
by sliding it in the battery holder
WALL MOUNTING
Mounting the Surge Protector
3
4
Note: Wall Mounting is available only on Strip and Block type Surge Protector.
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
1. There are mounting holes on the back of the Surge Protector for wall or base
board mounting.
2. Install screws (not included) on wall or baseboard surface (leaving at least 1/4
inch of the screw exposed).
3. Place and secure the Surge Protector on mounted screws.
While your device is off, connect the USB Transmitter to one of its USB port. If the
red LED light illuminates, this indicates there is still power in the USB port when
the device is off. Locate and use another USB port that does not always have
power in it for the USB Transmitter to correctly function.
Step 1
Connect electronic devices to the “ENERGY SAVER” outlets
Mounting the USB Transmitter
1. Select a spot within the wireless range to mount the supplied USB wall bracket.
2. The ideal locations for USB wall mount are entrance of a room or location
where USB wall mount can be easily seem and accessed.
3. Use adhesive tape or supplied screws to securely attach the supplied wall
bracket to a wall.
CONNECTING INSTRUCTION
Before you start, take a few minutes to understand the conditions for the USB
Transmitter to work correctly.
Few devices will always have power in its USB port regardless the on/off status of
the devices. This is due to convenience reason that the user can still use the USB
port with other handheld devices. In this case, the devices usually have higher
stand-by power since the USB port always draws power from the devices.
Since the USB Transmitter detects the power on/off status in device USB port to
correctly control the ENERGY SAVER outlets on the Surge Protector, the USB
Transmitter will not work with device that always has power in its USB port when
it is completely turned off.
The USB Transmitter is a great tool to check if your device USB port continues to
draw power while it’s turned off.
“ENERGY SAVER OUTLETS”
These outlets are for devices which do not need to be on all the time and can be
completely turned off when not in use. These outlets are automatically switched
On and Off by the wireless USB Transmitter for energy conservation purpose
The ideal electronic devices for “ENERGY SAVER OUTLETS” are listed below
IN HOME OFFICE
Monitor Speakers
scanner Printer
IN HOME ENTERTAINMENT
DVD Amplifier
Game Console Subwoofer
Step 2
Connect electronic devices to the “ALWAYS ON” outlets
5
6
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
“ALWAYS ON OUTLETS”
These outlets are not switchable and provide continuous power for devices which
always need to be stay on at all time.
Device which is hard drive-base or used for recording or schedule recording
purpose should be connected to ALWAYS ON outlets.
The ideal electronic devices for “ALWAYS ON OUTLETS” are listed below
IN HOME OFFICE
IN HOME ENTERTAINMENT
Note : The USB Transmitter can wirelessly control the surge protector within 25 ft.
Depending on user’s home setting; the main device can be connected to the
“Always On Outlet” on the surge protector or any power outlet within the wireless
range.
If the user connects the main device to the Energy Saver Outlet on the surge
protector, due to the configuration of the product; the User will always need to
manually turn on the power of the Energy Saver Outlets before the main device
can be turned on.
Step 4
Plug in the power cord of the Surge Protector into the power outlet
Modem Wireless Router
Fax machine External Hard drive
Cable/Sat Box
DVD Recorder / VCR
Step 3
Connect the main device to power source then connect the USB Transmitter to
the main device’s USB port
The ideal electronic devices which can be used as a main device are listed below
IN HOME OFFICE
Desktop PC Laptop
IN HOME ENTERTAINMENT
LCD / LED TV with USB Port
DVR
Note: The ENERGY SAVER outlets on the surge protector are default at power off
status
Optional* Connections on the Surge Protector
*Optional connections are only available on selected models
“USB CHARGER PORTS”
These two USB charging ports can provide 5V, total current rating of 1.5 Amps.
Exceeding 1.5 Amps rating will trigger the overload protection and disable the
charging function. If your portable devices could not be charged, unplug the
devices from the USB charging ports, and make sure the device you are going to
charge will not exceed total 1.5 Amps.
“TELEPHONE (RJ11) PROTECTION”
Provide protection against surges on phone line.
“NETWORK JACK (RJ45) PROTECTION”
Provide protection against surges on network line.
7
8
“DSS/COAX CONNECTOR PROTECTION”
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
Provide protection against surges on cable, DSS, and cable modem.
OPERATION
USE USB TRANSMITTER TO CONTROL ENERGY SAVER OUTLETS
Devices such as desktop pc, laptop or LCD/LED TV with USB port are ideal to be
used as the main device.
Connect USB Transmitter to main device USB port.
When you turn on the main device, USB Transmitter will sense the power in the
USB port, and wirelessly turn on the ENERGY SAVER outlets on the Surge
Protector.
When you turn off the main device, USB Transmitter will sense no power in the
USB port, and wirelessly turn off the ENERGY SAVER outlets on the Surge
Protector to eliminate stand-by power waste.
While USB Transmitter is connected to main device and device is on, you can
make the Energy SAVER outlets always on by pressing the button on the USB
Transmitter for 3 seconds. By doing so, the ENERGY SAVER outlets will remain on
even after you turn off the main device or remove USB Transmitter from the main
device.
When the ENERGY SAVER ON indicator light flashes, this indicates the ENERGY
SAVER outlets will be turned off in about 120 seconds.
USE USB TRANSMITTER AS A STAND-ALONE WIRELESS REMOTE
When the USB Transmitter is not connected to the main device, it can still be used
as a stand-alone wireless remote to control the ENERGY SAVER outlets on the
Surge Protector.
Simply press the button once on the USB Transmitter to turn on the power of the
ENERGY SAVER outlets. Press the button once to turn off the power of the ENERGY
SAVER outlets.
SURGE PROTECTOR MANUAL ON/OFF AND LEARNING BUTTON
Note : This button serves as Manual and Learning functions.
Manual On/Off
If you have lost your USB Transmitter, you can still manually switch on/off the
ENERGY SAVER outlets on the Surge Protector
1. Press the button once to switch on the ENERGY SAVER outlets. The ENERGY
SAVER ON indicator light will illuminate to indicate that the ENERGY SAVER
outlets are switched on.
Note : When the main device is turned off, the ENERGY SAVER outlets will be
turned off after 120~180 seconds.
This is to avoid immediate power cut off of the device on ENERGY SAVER outlets
while it is still in operation, so there is still time to turn off peripheral devices
before power is cut off.
2. Press the button once to switch off the ENERGY SAVER outlets. The ENERGY
SAVER ON indicator light will go off to indicate that the ENERGY SAVER outlets
are switched off.
9
10
LEARNING function
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
The USB Transmitter and the Surge Protector in the kit are pre-paired and ready
to use.
SPECIFICATIONS
If you purchase another compatible Surge Protector, you can pair the exiting USB
Transmitter with the new purchase Surge Protector.
1. Hold the USB Transmitter close to the Surge Protector.
2. Press and hold the learning button on the Surge Protector for 5 seconds. At this
time, the ENERGY SAVER ON indicator light will go flashing.
Note : you can release the button once the indicator light goes flashing
3. When the indicator light starts to flash; within 5 seconds, press the button on
the USB Transmitter to pair it with the Surge Protector.
4. If the Surge Protector has successfully learned the code from the USB
Transmitter, the ENERGY SAVER ON indicator light will go from flashing to solid
light, then go off.
5. Redo step 2~4 if learning is not successful.
Battery Type
Battery Life
Activation indicator
Wireless Range
Wireless USB Transmitter
* ON/OFF Button
Press the button to turn on/off the Energy Saver
Outlets remotely
* Activation Indicator Light
The red light illuminates to indicate the USB
Transmitter is being activated
* Wall Mount Stand for USB Transmitter
The stand can be used as a wall mount or docking stand
Use ONLY A23 12V Alkaline
Approx. 3-6 months
Red LED
Up to 25 ft (Open Space)
11
12
USB Smart Surge Manual All Versions V1.0
USB Smart Surge Manual All Versions V1.0
USB Smart Strip Type Surge Protector
* 2 “Always-On” Outlets
PROTECTED
GROUNDED FAULT
ENERGY SAVER ON
ENERGY SAVER
Provide continuous power for connected devices
* 4 “Energy Saver” Outlets
Controlled on/off by USB Transmitter
* Protected Indicator Light
The green light illuminates to indicate the surge protection is active
* Grounded Fault Indicator Light
The red light only illuminates to indicate that the power outlets are
ALWAYS ON
not properly grounded
* Energy Saver On Indicator Light
The blue light illuminates to indicate the Energy Saver Outlets are
switched on
*Always On Indicator Light
The green light illuminates to indicate that the Always On Outlets
are active
* Manual ON/OFF and Learning Button
Press the button to power on/off the Energy Saver Outlets or execute
learning function
* Circuit Breaker Reset Button
Reset the circuit breaker after a current overload at 15 Amps.
Disconnect all equipments before executing reset button
PROTECTED
GROUNDED FAULT
ENERGY SAVER ON
ALWAYS ON
ENERGY SAVER
USB Smart Block Type Surge Protector
* 3 “Always-On” Outlets
Provide continuous power for connected devices
* 5 “Energy Saver” Outlets
Controlled on/off by USB Transmitter
* Protected Indicator Light
The green light illuminates to indicate the surge protection
is active
* Grounded Fault Indicator Light
The red light only illuminates to indicate that the power
outlets are not properly grounded
* Energy Saver On Indicator Light
The blue light illuminates to indicate the Energy Saver
Outlets are switched on
*Always On Indicator Light
The green light illuminates to indicate that the Always On
Outlets are active
* Manual ON/OFF and Learning Button
Press the button to power on/off the Energy Saver Outlets
or execute learning function
* Circuit Breaker Reset Button
Reset the circuit breaker after a current overload at 15 Amps.
Disconnect all equipments before executing reset button
Electrical Rating
Surge Suppression
Clamping Voltage
Optional Secondary
Stand-by power
15A / 120V, 60Hz, 1800 Watts
1080 J
400 V
2 ports USB Charger (5V, total 1.5 Amps)
Combo Phone Line (RJ11) & Network (RJ45) Protection
DSS/COAX Connector Protection
<0.7W
Electrical Rating
Surge Suppression
Clamping Voltage
15A / 120V, 60Hz, 1800 Watts
2160 J
330 V
2 ports USB Charger (5V, total 1.5 Amps)
Optional Secondary
Combo Phone Line (RJ11) & Network (RJ45) Protection
DSS/COAX Connector Protection
Stand-by power
13
<0.7W
14
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
Loading...