![](/html/97/9777/97775e58e66cdcab4c63fd570d7ecbbd70e135c3363be020251234049b3f5773/bg1.png)
Wireless
Home Appliance Timer
Remote Control Kit
R9P-120
R9P-121
R9P-007
R9P-202
R9P-403
R9P-616
User’s Manual
All Versions
Service Center in USA
Company’s name: Haowell Technology & Consulting, Inc.
Address: 415 Cloverdale Ln. Walnut, CA 91789-2028
phone no: 909-859-5150
Fax no: 909-468-4660
Contact person: Shannon Chang
E-mail: Shannon@HaowellConsultants.com
© Copyright 2010
The information contained herein is subject to change without notice.
This document contains proprietary information, which is protected by copyright.
No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent.
February 2010
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which
the receiver is needed.
*Consult the dealer or an experienced radio/TV technician for help.
![](/html/97/9777/97775e58e66cdcab4c63fd570d7ecbbd70e135c3363be020251234049b3f5773/bg2.png)
INTRODUCTION
Operating Instruction - Outlet Adaptor
THANK YOU for purchasing Wireless Home Appliance Timer Remote Control
Kit, you can remotely control indoor or outdoor fixtures and appliances from
up to 100ft away (in open space).
Having your holiday lighting or appliances turned ON & OFF is just as easy as
few clicks on the timer remote control. Our product can conveniently help to
change your house into an easy home automation style.
OPERATING INSTRUCTIONS
NOTE: There are five types of Wireless Home Appliance Timer Remote
Control Kit available that best suits your needs. The timer remote control and
outlet adaptor may vary depending on the kit model purchased.
Indoor Use
R9P-120
1-Outlet
Wall Tap
with timer
remote control
R9P-121 R9P-202 R9P-403 R9P-616
1-Outlet
Wall Tap Plus
with timer
remote control
2-Outlets
Wall Tap Plus
(1 always on /
1 remote outlet)
with timer
remote control
Outdoor Use
4-Outlets
Yard Stake
(2 always on /
2 remote outlets)
with timer
remote control
6-Outlets
Yard Stake
(2 always on /
4 remote outlets)
with timer
remote control
1. Plug the outlet adaptor into a powered 125VAC wall outlet.
2. Plug the fixture / appliances you wish to control into 1 outlet wall tap / wall
tap plus or the remote outlet of the 2-outlets wall tap plus or yard stake.
3. Turn the mechanical power switch (electrical power switch is not
applicable) of the fixture / appliance to the ON position.
4. Use the timer remote control to set timer and control the fixture/appliance
(see the operating instruction – timer remote control in below).
IMPORTANT:
● Outdoor use outlet adaptor is recommended plugged into a
GFCI-protected outlet.
● Outdoor use outlet adaptor is suitable for damp locations. Not for water i
mmersion or for use where directly exposed to water.
● Yard stake outlet adaptor should be installed above ground level so it will
not fill up with water when raining or snowing. Always unplug and remove
the devices from the yard stake when raining or snowing.
MANUAL ON/OFF AND LEARNING FUNCTION OF THE OUTLET
ADAPTER
Note: This button on the outlet adapter serves as manual ON/OFF and
Learning functions.
Manual ON/OFF function
If you have lost your remote timer control, you can still manually turn on/off
the remote outlet on the outlet adaptor.
1. To manually turn on the fixture/appliance, press the MANUAL ON/OFF
button on the outlet adaptor once. The red LED indicator of the outlet
adaptor and the fixture / appliance that plug in the outlet adapter will then
turn ON as well.
1
2