Powertech Co M9PC02 User Manual

GREEN POWERLINK

On-Line Energy Management Solution

User Manual

The information contained herein is subject to change without notice.

This document contains proprietary information, which is protected by copyright.

No part of this document may be photocopied, reproduced,

or translated into another language without the prior written consent.

Feb. 2012

All Versions

TABLE OF CONTENTS

GREEN POWERLINK On-Line Energy Management Solution V1.0

INTRODUCTION...................................................................... 2

HARDWARE FEATURES ......................................................... 3

INSTALLATION....................................................................... 5

Wireless Setup Range.......................................................................... 5

Install Smart Socket............................................................................ 5

Install Smart Power Strip ................................................................... 6

Install CT Smart Meter in the circuit breaker panel............................ 7

Prepare the electrical circuit breaker................................................................... 7

Connect the CT clamps & voltage wires to the curren

& voltage input terminals..................................................................................... 8

Wiring Diagram .................................................................................................... 9

ENERGY MANAGEMENT GATEWAY INITIAL SETUP.............. 11

Browse and access Gateway within intranet network ...................... 11

Energy Gateway and Smart Metering Devices pairing instructions... 18

Change User ID and Password ......................................................... 22

Network Setup ................................................................................. 22

Electricity Cost and CO2 Emission Setup.......................................... 23

Outgoing Server Setup...................................................................... 24

Reset the Energy Gateway to Factory Default................................... 24

Reset to factory default from energy gateway web server................ 25

Browse and access Gateway from internet....................................... 25

INTRODUCTION

GREEN POWERLINK On-Line Energy Management Solution V1.0

HARDWARE FEATURES

Thank you for purchasing the GREEN POWERLINK online energy management solution, an innovative product which is designed to manage home electricity usage efficiently and reduce home electricity bill. In an effort to reduce your electricity bills, why not first check out what appliance uses most energy in your home.

The GREEN POWERLINK online energy management allows you to take control of home electricity usage while saving you money in the process.

With GREEN POWERLINK, you can see how much electricity you are using and with greater awareness you’ll become more energy efficient.

Fully educated with the critical energy information, you are naturally motivated to adopt new energy saving habits and reduce harmful carbon emission for our environment.

The GREEN POWERLINK is the total solution for green inspiration, energy conservation, and surge protection for your everyday life.

ZigBee Tracking Smart Socket ZigBee Tracking Smart Strip

R9P136A600 R9P624NI00

＊Surge Protected Outlet ＊180J Surge Protection

＊ZigBee Link: 2.4GHz (IEEE 802.15.4) ＊Transmission Time: 6 seconds ＊Wireless Range: 100 ft in open area ＊ZigBee Function: Router ＊ZigBee Profile: Smart Energy 1.0 ＊ZigBee Cluster: Simple Metering ＊Green Surge Protected LED Indicator ＊Manual ON/OFF Button w/ Green LED Indicator ＊Security: AES 128 bits (Optional) ＊Meet IEC 62053‐21 class I standard (1~1.5%)

＊6 Surge Protected Outlets ＊540J Surge Protection ＊Red Grounded Fault LED Indicator

ZigBee Tracking Smart Socket ZigBee Tracking Smart Strip

GREEN POWERLINK On-Line Energy Management Solution V1.0

M9PC020000 M9PG040000

＊Transmission Time: 6 seconds ＊ZigBee Function: Router ＊ZigBee Cluster: Simple Metering ＊Installation type: 1‐phase & 3‐wire ＊CT Meter Input Voltage:100~240V ＊CT Meter Input Current: 60A ＊CT Meter Frequency: 50/60Hz ＊CT Meter Accuracy: <1% at PF=1 ＊Power Supply: Power acquired

from electrical meter

＊ZigBee Link: 2.4GHz (IEEE 802.15.4) ＊Wireless Range: 100 ft in open area ＊ZigBee Profile: Smart Energy 1.0 ＊Security: AES 128 bits (Optional)

＊Link up to 9 PowerLink energy

tracking devices

＊ZigBee Function: Coordinator ＊Proprietary remote outlet on/off

control ＊Remote web browsing management

& power on/off control ＊Remote real time Cost, KWH, CO2

usage information display

＊RJ45 Ethernet Port Connection ＊Power Supply: AC/DC adaptor

(included)

INSTALLATION

Wireless Setup Range

The energy gateway and smart socket/strip/CT meter communicate with

wireless

please locate and setup energy gateway, smart socket/strip/CT meter within 100 Ft of range.

Install Smart Socket

The single outlet smart socket allows the user to track electricity consumption of individual home appliance and protect it against surge and voltage spikes.

1. Plug in the smart socket to a powered AC outlet.

2. Plug in the appliance into the smart socket outlet.

3. The outlet power can be manually turned ON/OFF by pressing the “Manual ON/OFF” button on the smart socket. You may also control the outlet power remotely by using the energy monitor (see the operation instruction).

4. Perform initial energy monitor and smart socket pair up (see the operation instruction).

technology. To ensure the communication with no interruption,

PROTECTED LED LIGHT

This LED light illuminates to indicate that the surge protection is active and protecting equipments from power surges.

Manual ON/OFF” button

Install Smart Power Strip

GREEN POWERLINK On-Line Energy Management Solution V1.0

The smart power strip allows the user to track electricity consumption of group home appliances in the same area and protect it against surge and voltage spikes.

1. Plug in the smart power strip to a powered AC outlet.

2. Plug in the appliances into the smart power strip outlets.

3. The Energy Saver outlets on the power strip can be manually turned ON/OFF by pressing the “Manual ON/OFF” button on the power strip. You may also control the energy saver outlets remotely by using the energy monitor (see the operation instruction).

4. Perform initial energy monitor and smart power strip pair up (see the operation instruction).

PROTECTED LED LIGHT

This LED light illuminates to indicate that the surge protection is active and protecting equipments from power surges.

Install CT Smart Meter in the circuit breaker panel

The CT smart meter allows the user to measure entire electricity powerconsumption from electrical panel.

Your safety is very important to us. Please read these cautions regarding the installation of your CT Smart Meter.

＊

when the main circuit breaker has been switched off. Do not attempt any installation unless you are familiar where these electrified areas are.

＊

electrical shock. It is highly recommended that all work should be done only by qualified electricians or certified electrical specialist.

Caution

Electrical panel contains live electrical wires and components even

Any work on or near electrical panel could induce danger or fatal

GROUNDED LED LIGHT

This LED light illuminates to indicate that the surge protector is plugged into a properly grounded outlet.

ALWAYS ON OUTLETS

are also available for devices which are always kept on and need continuous power.

Manual ON/OFF” button

Prepare the electrical circuit breaker

WARNING:

＊

Before you start, you must turn off all power in the electrical circuit

breaker by turning off the main breaker or main switch.

＊

Some wires and components could still be live even when the main breaker or switch is turned off. Please indentify these wires and components before installation and pay attention to these areas at all time.

1. Turn off all power by turning off the main breaker or main switch.

2. Remove the cover of electricity circuit breaker panel.

Connect the CT clamps & voltage wires to the current & voltage

GREEN POWERLINK On-Line Energy Management Solution V1.0

input terminals

Before installation, please connect the CT clamp wires to the current input terminal following the sequence 1S(red) 1L(black) 2S(red) 2L(black). Then connect the voltage wires to the voltage input terminal following the sequence L(red) N(black).

At the bottom of the current transformer, there is “K→L” indication mark. Before you clip on the CT over the power line, please make sure the power current flow direction follow the “K→L” indication mark on the CT

K L

Wiring Diagram

Refer to the following wiring diagram and dial the mode switch that matches your electrical panel type. Then install CT clamp over the power line and voltage wires to L and N voltage terminals.

Once the CT smart meter is installed in the electrical panel, turn on the main breaker and perform initial energy gateway and CT smart meter pair up (see the operation instruction).

1 Phase & 2 Wire – 1CT

Botton view

+ 11 hidden pages