PowerTec P-LM14 User Manual

Thank you for purchasing your new Powertec equipment.
To maximize the use of this equipment, please take a moment to study, understand and
familiarize with the assembly instructions and follow the sequence of steps as provided in
the manual.

Because of our products unique features, this manual was created to provide you with

information on how to assemble and properly maintain your equipment.

Table of Contents

Introduction and Weight Capacities………………….………………………………….. 2

Safety Instructions, Warnings and Cautions …………………….…………………….... 3

Maintenance Tips…………………………………………………………….………….. 4

Tools Required for Assembly………………………………………………………….... 5

Hardware List…………………………………………………………………………… 6
Parts List………………………………………………………………………………… 7
Exploded Diagram………………………………………………………………………. 8
Assembly Steps………………………………………………………………………….. 9 - 12

Cable Routing Diagram ………………………………………………………………… 13

Featured Exercises………………………………………………………………………. 14

Warranty Certificate…………………………………………………………………….. 15
Warranty Registration Card……………………………………………………………... 16

P-LM14

Weight Capacities

500 LBS. Maximum Capacity / Carriage / Cable

Featured Exercises

Close Grip Lat Pull Down Wide Grip Lat Pull Down Low Cable Rows One Arm Row
Low Cable Curls Standing Front Lat Pull Downs Overhead Triceps Extension
Low Cable Triceps Kick High To Low Wood Chops Low To High Wood Chops
Bicep Curls

Optional Accessories

OP-255B Olympic Weight Plates WS-190 Weight Stack Option WH-100 1” Weight Horns

Other Recommended Powertec Strength Classic Systems

L-SC13 Levergym Squat Calf L-CDA+13 Levergym Chin / Dip
P-CLS13 Compact Leg Sled P-HC10 Dual Hyperextension Crunch
P-BT13 Basic Trainer L-CG13 Levergym Compact Gym

P-LP13 Powertec Leg Press

2

SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS

It is recommended that users of this equipment receive a thorough medical exam before
commencing any exercise program. This is especially important if you have never
Exercised and or are over the age of 35, are pregnant or suffer from any health issues.

Read All Warnings and Cautions on this Manual and on the Product

This product should only be used after a thorough review of the Owner’s Manual.

Keep children away from the product when in use.

Set up and operate the product on a solid level surface.

Do not set up the product on loose rugs or uneven surfaces.

Make sure adequate space is available to exercise and move around the product.

Inspect product before and after each use, inspect for worn out or loose parts,
repair or replace as needed.

This equipment meets industry safety standards for stability when used for the
intended exercise. Do not allow straps, resistance bands or other means to be
attached to the framework of this equipment to perform stretching or body weight
exercises as it can result to equipment instability and lead to serious injuries.

Always choose a workout that best fits your needs, physical strength and flexibility
Levels, know your limits and your product limits and train within them.

Always wear proper footwear with nonskid rubber soles such, running, walking or
Cross training shoes that fit well and provide support.

Do not exercise bare foot or in socks.

Always use common sense when exercising.

3

“Committed to Stronger Lives”

MAINTENANCE

The safety and performance of this product can be maintained only if it is examined
regularly for damage and normal wear.
Examine the equipment before each use for damage and wear. Replace damaged and
worn components immediately or put the equipment out of use until repaired.

Inspect Daily / Before Each Use!

Inspect system. Make sure it is in good condition and operates smoothly.
If you find damage, DO NOT USE. Contact your authorized Powertec dealer or
Powertec Customer Service Center for assistance.

Inspect Daily / After Each Use!

Clean system with a clean, dry cloth. Use a mild detergent or spray on upholstery.
Do Not use cleansers containing enzymes.

Inspect Weekly!

Clean your system fully with a clean and ammonia based cleaner.
Touch up any scratches with touch-up paint to prevent rust, if necessary.

Inspect Monthly!

Examine the frame for signs of cracking or permanent bending. Do not use the equipment
if you see this. Contact Powertec Customer Service Immediately.
If you have any questions on the correct use or maintenance of this equipment, call your
authorized distributor or Powertec Customer Service at 800-250-6665

Our Customer Service Mission:

By providing friendly and understanding service.

4

Tools Required for Assembly

M6 Allen Wrench

Wrenches
13 mm = 1/2"
19 mm = 3/4”
21 mm = 13/16”

8” Adjustable Wrench

5