PowerTec MT4006 Owner's Manual

Owner’s Manual

Model No. MT4006

WORK BENCH

You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.

Visit us on the web at www.southerntechllc.com

17-0417

QUESTION...

1•847•780•6120

PRODUCT

SPECIFICATIONS

Work Top (open) ....................... 13" x 23-7/8"

. . . . . . . . . . . . . . . . . . . . . . . . . . . . (330.2 mm x 606.4 mm)

Work Top (closed) ....................9-1/2" x 23-7/8"

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (241.3 mm x 605 mm)

Maximum Work Top Opening .........3-9/16" (90.5 mm)

Maximum Bench Dog Clamping .......9-3/8" (238.1 mm)

Maximum Load Capacity ..............220 lbs (100 kg)

Net Weight .......................10.78 lbs (4.9 kg)

TABLE OF CONTENTS

SAFETY RULES 1

ASSEMBLY 2

Unpacking
Tools Needed
Assembly

PARTS ILLUSTRATION 4

& LIST

WARRANTY 5

SECTION PAGE

SAFETY RULES

1

1

SAFETY RULES

WARNING

For your own safety, read all of the rules and precautions
before operating tool.

WARNING

Always follow proper operating procedures as defined
in this manual even if you are familiar with the use of
this work bench or any tool used with this work bench.
Remember that being careless for even a fraction of a
second can result in severe personal injury.

You must be familiar with the use of any tool or accessory
used with this work bench. The supplier cannot be held
responsible for any accident, injury or damage incurred
while using this work bench with any tool.

WARNING

Some dust created by operation of power tool contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. To
reduce your exposure to these chemicals, work in a well
ventilated area and work with approved safety equipment.
Always wear OSHA/NIOSH approved, properly fitting face
mask or respirator when using such tools.

CAUTION

Do not modify or use this work bench for any application
other than that for which it was designed.

SAFETY FOR WORK BENCH

• Do not attempt to assemble or operate your work bench
until you have read the safety instructions in this section.

• Only use your work bench on a hard, dry and
flat surface.

• Keep your work area clean and well lit. Cluttered or dark
areas invite accidents.

• Do not overreach. Keep proper footing and balance at
all times.

• Do not load the work bench with more than 220 lbs
(100 kg).

• Do not stand on the work bench. Do not use the work
bench as a ladder or standing platform.

• Do not stand or climb on work bench. It could tip over,
causing serious injury.

• Make sure the legs are opened fully and locked in place
before using the work bench.

• Be aware of tipping. Make sure the load is balanced, an
unbalanced load can tip. Always ensure the workpiece
is well supported.

• Do not permit children to use the work bench
unsupervised. It is not a toy.

• Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts. Always wear non-slip footwear. Tie
back long hair. Roll long sleeves above the elbow.

• Store properly. Do not store the work bench outdoors or
in a damp location.

CAUTION

Think safety! Safety is a combination of operator common
sense and alertness at all times when tool is being used.

WARNING

Do not attempt to operate tool until it is completely
assembled according to the instructions.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE