POWERCAPPOWERCAP
POWER FACTOR CORRECTION CAPACITORS
TM
POWER
SURVEY
INTERNATIONAL INC.
Serving you since 1948
TM
POWERCAPPOWERCAP
POWERCAPPOWERCAP
POWER FACTOR CORRECTION CAPACITORS
20 year continuous duty design life
3 phase construction with 3 phase pressure interrupter system
Dry type or liquid type cells available
Floor and/or wall mounting brackets integral with enclosure
UL and CSA listed
FEATURES AND SPECIFICATIONS
CAPACITORS CELLS ENCLOSURES
Construction :
Self healing, low loss metallized
polypropylene dielectric film.
Less than .2 Watt per KVAR losses.
Dielectric wax is used for PSD dry type
cells and non-PCB biodegradable fluid
for PSP wet cells.
UL listed pressure activated circuit
interrupter rated for 10,000 AFC.
Discharge resistors to reduce residual
voltage to less than 50V in one minute.
Operating temperature of -40°F (-40°C)
to 115°F (46°C).
Powercap Ratings :
240V, up to 200 KVAR, 3 ph.
480V, up to 400 KVAR, 3 ph.
600V, up to 400 KVAR, 3 ph.
Special ratings
KVAR)
available on request
(frequency, voltage and
Construction :
Code gage steel with baked powder paint.
All standard units have provision for either
floor and/or wall mounting.
Standard enclosure is Nema 1 and 12.
Nema 3 and 4X enclosure can be provided
upon request.
Easy access to line and ground lugs
through an ‘L' shaped cover.
Optional current limiting fuses are
available with 100,000 to 200,000 AIC.
Optional blown fuse pilot lights can be
provided in either “on all the time” or “off
all the time” configurations.
Other options available :
Contactor mains
Iron core chokes - reactor for
harmonic filtering
Single phase
Any special features
Please consult factory