MH20845
®
Sealed Rechargeable
MODEL PS-6580
6 Volt 58.0 Amp. Hr.
Battery
www.power-sonic.com
B
A
T
T
E
R
Y
M
U
S
T
B
E
R
E
C
Y
C
L
E
D
Pb
NONSPILLABLE
L
HT H
W
PS-6580
6 Volt 58.0 AH
Features
Absorbent Glass Mat (AGM) technology for superior
•
performance
Valve regulated, spill proof construction allows safe
•
operation in any position
Power/volume ratio yielding unrivaled energy density
•
Rugged impact resistant ABS case and cover (UL94-HB)
•
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
•
C.A.B. certi ed
U.L. recognized under le number MH 20845
•
Terminals (mm)
Performance Specifi cations
Nominal Voltage ...........................................................................6 volts (3 cells)
Nominal Capacity
F2 - Quick disconnect
•
tabs, 0.250” x 0.032”
- Mate with AMP. INC
FASTON “250” series
20-hr. (2.9A to 5.25 volts) .............................................................. 58.0 AH
10-hr. (5.6A to 5.25 volts) .............................................................. 56.0 AH
5-hr. (10A to 5.10 volts) ................................................................ 50.0 AH
3-hr. (15A to 4.50 volts) ................................................................. 45.0 AH
1-hr. (35A to 4.50 volts) ............................................................... 35.0 AH
Physical Dimensions: in (mm)
Approximate Weight ........................................................... 19.50 lbs. (8.8 kg)
Energy Density (20-hr. rate) ................................. 1.34 W-h/in3 (81.97 W-h/l)
Specifi c Energy (20-hr. rate) .............................. 17.85 W-h/lb (39.34 W-h/kg)
Internal Resistance (approx.) ........................................................ 6 milliohms
Max Discharge Current (7 Min.) ................................................. 174 amperes
Max Short-Duration Discharge Current (10 Sec.) ................... 580 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ...................................................................................................... 97%
3 Months ..................................................................................................... 91%
6 Months .................................................................................................... 83%
Operating Temperature Range
Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
L: 7.28 (185) W: 4.41 (112) H: 8.07 (205) HT: 8.07 (205)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
To ensure safe and effi cient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.
Case ...................................................................................................... ABS Plastic
Power-Sonic Chargers ................................................ PSC-64000A, 64000A-C
www.power-sonic.com
Capacity Retention Ratio (%)
Standing Period (Months)
100
80
60
40
0
0 2 4 6 8 10 12 14 16 18 20
40oC
(104oF)
30oC
(86oF)
20oC
(68oF)
5oC
(41oF)
Chargingis not
necessary unless
100% of capacity
is required.
Chargingbefore
use is necessary
to help recover
full capacity.
Chargemay fail
to restore full
capacity. Do not
let batteries reach
this state.
100
80
60
40
20
0
0 1 2 3 4
Ambient Temperature 20˚C (68˚F)
Float Charging Voltage
2.25 - 2.30 V/Cell
Retention Capacity (%)
Years
120
100
80
60
40
20
0
0 200 400 600 800 1000 1200
Number of Cycles
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
2. Charge Current: 0.1C
3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
Retention Capacity (%)
Discharge
Depth 30%
Discharge
Depth 100%
Discharge
Depth 50%
PS-6580 6 Volt 58.0 AH
Shelf Life & Storage
Discharge Time vs. Discharge Current
20
15
10
h
5
Final
Voltage
5.25V
2
1
Discharge Time
30
5.10V
4.80V
Discharge Characteristics
7.0
Ambient Temperature 20oC (68oF)
6.5
6.0
5.5
5.0
Terminal Voltage (V)
4.5
4.0
Final
Voltage
116
1.2 2.4 6 12 24 36 48 1 2 4 6 8 10 20 4 0
29
58
min
11.6
5.8
h
Discharge Time
Life Characteristics in Stand-By Use
2.9
min
10
5
4.50V
40oC (104oF)
20oC (68oF)
0oC (32oF)
4.05V
2.9 5.8 11.6 29 58 116
Discharge Current (A)
Charging
Cycle Applications: Limit initial current to 17.4A. Charge until battery voltage
(under charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35
volts until current drops to under 580mA. Battery is fully charged under these
conditions, and charger should be disconnected or switched to “oat” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of
6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its
own current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of this type of battery, it is
imperative that they be charged within 6 months of storage, otherwise permanent
loss of capacity might occur as a result of sulfation.
Chargers
Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH.
Please refer to the Charger Selection Guide in our specication sheets for “C-Series
Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our
Technical department for advice if you have difculty in locating suitable models.
Contact Information
DOMESTIC SALES
Tel: +1-619-661-2020
Fax: +1-619-661-3650
© 2011. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
national-sales@power-sonic.com
CUSTOMER SERVICE
Tel: +1-619-661-2030
Fax: +1-619-661-3648
customer-service@power-sonic.com
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650
Life Characteristics in Cyclic Use
Further Information
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (MSDS), ISO
certication, etc..
www.power-sonic.com
TECHNICAL SUPPORT
Tel: +1-619-661-2020
Fax: +1-619-661-3648
support@power-sonic.com
INTERNATIONAL SALES
Tel: +1-650-364-5001
Fax: +1-650-366-3662
international-sales@power-sonic.com
0211 1M