Power-Sonic PS-605 User Manual

Sealed Rechargeable

MODEL PS-605W

6 Volt 0.5 Amp. Hr.

Battery

B

A

T

T

E

R

Y

M

U

S

T

B

E

R

E

C

Y

C

L

E

D

Pb

NONSPILLABLE

MH20845

®

L

HT

W

H

3.3

8

3.9

2.5

PS-605

6 Volt 0.5 AH

Features

Absorbent Glass Mat (AGM) technology for superior

•
performance

Valve regulated, spill proof construction allows safe

•
operation in any position

Power/volume ratio yielding unrivaled energy density

•

Rugged impact resistant ABS case and cover (UL94-HB)

•

Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and

•

C.A.B. certi ed

U.L. recognized under  le number MH 20845

•

Terminals (mm)

WL - 165mm Molex

•

housing 50-37-5023

Physical Dimensions: in (mm)

L: 2.24 (57) W: 0.55 (14) H: 1.97 (50) HT: 1.97 (50)

Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for

height dimensions. All data subject to change without notice.

Performance Specifi cations

Nominal Voltage ...........................................................................6 volts (3 cells)

Nominal Capacity

20-hr. (25mA to 5.25 volts) ............................................................ 0.50 AH

10-hr. (45mA to 5.25 volts) ............................................................ 0.45 AH

5-hr. (80mA to 5.10 volts) ............................................................ 0.40 AH

1-hr. (300mA to 4.50 volts) .......................................................... 0.30 AH

15-min. (950.0mA to 4.50 volts) .........................................................0.24 AH

Approximate Weight ........................................................... 0.20 lbs. (0.09 kg)

Energy Density (20-hr. rate) ................................. 1.24 W-h/in3 (75.43 W-h/l)

Specifi c Energy (20-hr. rate) .............................. 15.00 W-h/lb (33.07 W-h/kg)

Internal Resistance (approx.) .................................................... 360 milliohms

Max Discharge Current (7 Min.) ................................................................. n/a

Max Short-Duration Discharge Current (10 Sec.) .................................... n/a

Shelf Life (% of nominal capacity at 68°F (20°C))

1 Month ...................................................................................................... 97%

3 Months ..................................................................................................... 91%

6 Months .................................................................................................... 83%

Operating Temperature Range

Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C)

Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)

Case ...................................................................................................... ABS Plastic

Power-Sonic Chargers ................................................................................... n/a

To ensure safe and effi cient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.

www.power-sonic.com

Capacity Retention Ratio (%)

Standing Period (Months)

100

80

60

40

0

0 2 4 6 8 10 12 14 16 18 20

40oC
(104oF)

30oC
(86oF)

20oC
(68oF)

5oC
(41oF)

Chargingis not
necessary unless
100% of capacity
is required.

Chargingbefore
use is necessary
to help recover
full capacity.

Chargemay fail
to restore full
capacity. Do not
let batteries reach
this state.

100

80

60

40

20

0

0 1 2 3 4

Ambient Temperature 20˚C (68˚F)

Float Charging Voltage

2.25 - 2.30 V/Cell

Retention Capacity (%)

Years

120

100

80

60

40

20

0

0 200 400 600 800 1000 1200

Number of Cycles

1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)

2. Charge Current: 0.1C

3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)

Retention Capacity (%)

Discharge
Depth 30%

Discharge
Depth 100%

Discharge
Depth 50%

PS-605 6 Volt 0.5 AH

®

Shelf Life & Storage

Discharge Time vs. Discharge Current

20
15
10

h

5

Final

Voltage

5.25V

2

1

Discharge Time

30

5.10V

4.80V

Discharge Characteristics

7.0

Ambient Temperature 20oC (68oF)

6.5

6.0

5.5

5.0

Terminal Voltage (V)

4.5

4.0

Final
Voltage

1.0

1.2 2.4 6 12 24 36 48 1 2 4 6 8 10 20 4 0

0.25

0.50

min

0.10

0.05

h

Discharge Time

Life Characteristics in Stand-By Use

0.025

min

10

5

4.50V

40oC (104oF)
20oC (68oF)
0oC (32oF)

4.05V

0.025 0.05 0.10 0.25 0.50 1.0

Discharge Current (A)

Charging

Cycle Applications: Limit initial current to 150mA. Charge until battery voltage

(under charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35
volts until current drops to under 5mA. Battery is fully charged under these
conditions, and charger should be disconnected or switched to “oat” voltage.

“Float” or “Stand-By” Service: Hold battery across constant voltage source of

6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its

own current level and maintain itself in a fully charged condition.

Note: Due to the self-discharge characteristics of this type of battery, it is
imperative that they be charged within 6 months of storage, otherwise permanent
loss of capacity might occur as a result of sulfation.

Chargers

Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH.

Please refer to the Charger Selection Guide in our specication sheets for “C-Series
Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our
Technical department for advice if you have difculty in locating suitable models.

Contact Information

DOMESTIC SALES

Tel: [phone]
Fax: [phone]

© 2011. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.

[e-mail]

CUSTOMER SERVICE

Tel: [phone]
Fax: [phone]

[e-mail]

CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: [phone] • Fax: [phone]

Life Characteristics in Cyclic Use

Further Information

Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (MSDS), ISO

certication, etc..

www.power-sonic.com

TECHNICAL SUPPORT

Tel: [phone]
Fax: [phone]

[e-mail]

INTERNATIONAL SALES

Tel: [phone]
Fax: [phone]

[e-mail]

0211 1M