AC-DC Power Supplies
TOP 200 Series, 200 Watt
www.powersolve.co.uk
Features
• Highest power density in 127 x 76.2mm footprint
• Supplies 200W with convection cooling
• High efficiency of 90% typical
• Operating temperature range of -25°C to +70°C
• Compliance with EN 61000-3-2
• Low leakage current
• Safety class I and class II
Electrical Specification
Input voltage range 85-264Vac with derating at low mains input
Input Frequency 47-63Hz
EMI emission EN 55022 class B, harmonic current EN 61000-3-2 class A
EMI immunity EN 61000-4-2, -3, -4, -5, -6, -11
Output current limitation 120-150% of Iout max.
Short Circuit Protection foldback, automatic recovery
Overvoltage protection >150% of Vout nom. (12 & 15V models), >125% of Vout nom. (24 & 48V models)
Operating Temperature Range -25°C to +70°C (convection cooling) (derate linearly to 80W at 70°C above 40°C)
Safety Approvals cUL/UL 60950-1, IEC/EN 60950-1
Degree of protection Class I, class II prepared with second fuse
Output Voltage and Current Ratings
MODEL OUTPUT OUTPUT OUTPUT RIPPLE & LINE REG. LOAD REG. EFFICIENCY
TOP 200-112 200W 12VDC 16A 120mV pk-pk max. 1.0% 1.0% 90%
TOP 200-115 200W 15VDC 13A 120mV pk-pk max. 1.0% 1.0% 90%
TOP 200-124 200W 24VDC 8.3A 120mV pk-pk max. 1.0% 1.0% 92%
TOP 200-148 200W 48VDC 4.2A 150mV pk-pk max. 1.0% 1.0% 92%
POWER VOLTAGE CURRENT NOISE
Mechanical & Connection Details
Dimensions in Inches (mm)
J1 Mating connector: Molex 09-50-3031
Pin Function
1 AC in Live
2 AC in Neutral
PE Mating connector: TAB-6.3 (¼”)
J2 Mating Connector: Molex 09-50-3061
Pin SINGLE OUTPUT
1 +Vout
2 +Vout
3 +Vout
4 -Vout
5 -Vout
6 -Vout
J3 Mating Connector: Molex 22-01-2025
Pin Function
1 Contact
2 Current
Pin 1 connected to secondary ground will turn unit OFF
Output voltage may pulse to 20% of nominal output voltage
Pin 2 connected to ext. current source of 10mA will turn unit OFF
No pulsing of output voltage
Pin 1 & 2 open circuit: unit is ON
Crimp Terminal: Molex 08-52-0072
Protective Earth if used as safety class 1 unit
Crimp Terminal: Molex 08-52-0072
Crimp Terminal: 08-50-0032
Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Loading...