Datasheet TIS Datasheet (Powersolve)

www.powersolve.co.uk

Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England

Tel :[phone] Fax: [phone] Email: [e-mail]

Industrial Power Supplies

TIS Series with Function Modules

= Additional Functions for System Applications in

Process Automation, Machine Tools, etc.

= Basic Model Power Supplies can be extended with one

of the following integrated Function Modules:

RED: for True N+1 Redundancy Operation
SIG: AC-Power Fail, DC-OK Signal plus Remote On/Off
UDS: DC-UPS with automatic Battery Management

Models

Description *Order code Output power Output voltage Output current

max. nominal max.
Models with
RED Module TIS 150-148 RED 150 Watt 48 VDC 3 A

Models with TIS 150-124 SIG 150 Watt 24 VDC 6 A
SIG Module TIS 150-148 SIG 150 Watt 48 VDC 3 A

Models with TIS 300-124 UDS 300 Watt 24 VDC 12 A
UDS Module TIS 600-124 UDS 600 Watt 24 VDC 24 A
Battery Pack TIS 24-32 AP 24 VDC 3.2 Ah

* includes power supply, relative function module and terminal plugs

TIS 150-124 RED 150 Watt 24 VDC 6 A

TIS 300-124 RED 300 Watt 24 VDC 12 A
TIS 300-148 RED 300 Watt 48 VDC 6 A
TIS 600-124 RED 600 Watt 24 VDC 24 A
TIS 600-148 RED 600 Watt 48 VDC 12 A

TIS 300-124 SIG 300 Watt 24 VDC 12 A
TIS 300-148 SIG 300 Watt 48 VDC 6 A
TIS 600-124 SIG 600 Watt 24 VDC 24 A
TIS 600-148 SIG 600 Watt 48 VDC 12 A

TIS 24-70

AP

24 VDC

7

Ah

RED Module

With this module it is possible to parallel up
to 5 power supplies with active current
sharing for true N+1 operation. De-coupling
diodes (OR-ring diodes) and also alarm
output to signal a unit failure are included in
this option.

SIG Module

This module provides 3 functions: AC-Power
fail signal and DC-OK signal, both with
isolated relay contacts. In addition a remote
On/Off input is available to control the power
supply.

UDS Module

With this module, a professional battery
management system to charge and monitor
an external battery is added to the basic
power supply
battery is switched automatically and without
any interruption to the DC-output.Power fail
and low battery alarm signals are available.
During normal operation battery status is
checked periodically and the external battery
is fully protected under any operation
condition.

. In case of a power failure the

Battery Pack

The battery pack contains high quality
maintenance free lead-acid batteries with 3.2
Ah resp. 7.0 Ah capacity fixed together with a
resetable fuse in a mounting frame. Together
with models
124 UDS the battery pack provides a
complete and reliable DC-UPS
system.Backup time depends on load current
and battery capacity.

For further information and specifications
please refer to Industrial Power Supplies TIS
Series 50–600 Watt. Dimensions same as
basic models.

TIS 300-124 UDS or

,

TIS 600-