DC-DC Converters
TES2H Series, 2 Watt
www.powersolve.co.uk
Features
• SMD package with industry standard footprint
• Single and dual output models
• High accuracy of pin co-planarity
• Qualified for leadfree reflow solder process
• Available in tape and reel package
Electrical Specification
Line Regulation non regulated
Load Regulation +10% / -5% max.
Short Circuit Protection limited 0.5 sec.
Operating Temperature Range -40°C to +85°C (derate at 4.0%/°C above 75°C)
I/O Isolation test voltage 1500VDC
I/O Isolation capacitance 60pF typical
I/O Isolation resistance >10G ohm
Casing plastic (UL94V-0 rated)
Output Voltage and Current Ratings
MODEL INPUT OUTPUT OUTPUT RIPPLE & EFFICIENCY
TES 2-0510H 3.3VDC 500mA 120mV pk-pk max. 70%
TES 2-0511H 5VDC 400mA 120mV pk-pk max. 73%
TES 2-0512H 5VDC ±10% 12VDC 165mA 120mV pk-pk max. 77%
TES 2-0521H ±5VDC ±200mA 120mV pk-pk max. 74%
TES 2-0522H ±12VDC ±83mA 120mV pk-pk max. 76%
TES 2-0523H ±15VDC ±66mA 120mV pk-pk max. 76%
TES 2-1210H 3.3VDC 500mA 120mV pk-pk max. 72%
TES 2-1211H 5VDC 400mA 120mV pk-pk max. 75%
TES 2-1212H 12VDC ±10% 12VDC 165mA 120mV pk-pk max. 79%
TES 2-1221H ±5VDC ±200mA 120mV pk-pk max. 78%
TES 2-1222H ±12VDC ±83mA 120mV pk-pk max. 80%
TES 2-1223H ±15VDC ±66mA 120mV pk-pk max. 80%
TES 2-2410H 3.3VDC 500mA 120mV pk-pk max. 72%
TES 2-2411H 5VDC 400mA 120mV pk-pk max. 75%
TES 2-2412H 24VDC ±10% 12VDC 165mA 120mV pk-pk max. 79%
TES 2-2421H ±5VDC ±200mA 120mV pk-pk max. 77%
TES 2-2422H ±12VDC ±83mA 120mV pk-pk max. 79%
TES 2-2423H ±15VDC ±66mA 120mV pk-pk max. 79%
VOLTAGE VOLTAGE CURRENT NOISE
Mechanical and Connection Details
Single Output Models Dual Output Models
Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Pin Single Output Dual Output
1 -Vin (GND) -Vin (GND)
2 +Vin (Vcc) +Vin (Vcc)
4 -Vout Common
5 +Vout -Vout
7 +Vout
8 No conn.
10 No conn.
Loading...