Datasheet TEN25WI Datasheet (Powersolve)

DC-DC Converters

TEN25WI Series, 25-30 Watt

Features

• Ultra wide 4:1 input range

• High efficiency up to 89%

• I/O isolation 1500VDC

• Operating temperature range -40°C to +85°C

• Short circuit protection

• Adjustable output voltages

• Remote On/Off

• High power density in a 50.8 x 40.6 x 9.3 mm metal package

Electrical Specification

Output Voltage Adjustment ±10% by external resistor
Conducted EMI EN55022 class A & FCC level A (internal filter)
Short Circuit Protection continuous, automatic recovery
Operating Temperature Range -40°C to +85°C (derate at 2.0%/k above 55°C)
Thermal protection Shutdown at 115°C
Safety Approvals cUL/UL 60950-1, IEC/EN 60950-1
Casing nickel plated copper, 6-side shielded with insulated baseplate
Remote On/Off Shutdown input for low input current (5mA) in standby operation

www.powersolve.co.uk

Output Voltage and Current Ratings

MODEL INPUT OUTPUT OUTPUT RIPPLE & LINE LOAD EFF.

TEN25-2410WI 3.3VDC 5500mA 80mV pk-pk max. 0.5% 1.0% 82%
TEN25-2411WI 5VDC 5000mA 80mV pk-pk max. 0.5% 1.0% 85%
TEN25-2412WI 10 - 40VDC 12VDC 2500mA 80mV pk-pk max. 0.5% 1.0% 89%
TEN25-2413WI 15VDC 2000mA 80mV pk-pk max. 0.5% 1.0% 89%
TEN25-2422WI ±12VDC ±1250mA 80mV pk-pk max. 0.5% 2.0% 89%
TEN25-2423WI ±15VDC ±1000mA 80mV pk-pk max. 0.5% 2.0% 89%
TEN25-4810WI 3.3VDC 5500mA 80mV pk-pk max. 0.5% 1.0% 82%
TEN25-4811WI 5VDC 5000mA 80mV pk-pk max. 0.5% 1.0% 85%
TEN25-4812WI 18 - 75VDC 12VDC 2500mA 80mV pk-pk max. 0.5% 1.0% 89%
TEN25-4813WI 15VDC 2000mA 80mV pk-pk max. 0.5% 1.0% 89%
TEN25-4822WI ±12VDC ±1250mA 80mV pk-pk max. 0.5% 2.0% 89%
TEN25-4823WI ±15VDC ±1000mA 80mV pk-pk max. 0.5% 2.0% 89%

VOLTAGE VOLTAGE CURRENT NOISE REG. REG.

Output Voltage Adjustments

Trim output open circuit = Vo nominal

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]

DC-DC Converters

www.powersolve.co.uk

Mechanical and Connection Details

Heatsink (optional) TEN-HS2

Pin Single Output Dual Output

1 +Vin (Vcc) +Vin (Vcc)
2 -Vin (GND) -Vin (GND)
3 Remote On/Off Remote On/Off
4 No Pin +Vout
5 +Vout Common
6 -Vout -Vout
7 Trim Trim

Dimensions in mm (inches)

Order Code: TEN-HS2

Material: Aluminium
Finish: Anodic treatment (black)
Weight: 19g (0.67oz) (without converter)

Note:

The product label on the converter has to be removed before mounting the heatsink.
For volume orders the converters can be supplied with the heatsinks fitted, contact sales for information.
Separate heatsinks are available for prototypes and small quantity orders only.

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]