AC-DC Converters
®
US
CFM40D/T Series
40 Watt Dual/Triple Output
Features
• Universal Input : 90 ~ 264Vac
• 2”x 4” Footprint
• Industry-Standard Pin Out
• Efficiency at 75% Typical (70% for CFM40T-07)
• Meets UL/cUL,TUV,CE
• Conductive EMI Meets CISPR/FCC Class B
Electrical Specification
INPUT
Input voltage 90 - 264 VAC
Input frequency 47 to 63 Hz
Inrush Current 50A max. @ 264Vac
Input Current 1A max. (RMS) @ 115Vac
Conducted EMI CISPR/FCC Class B
Isolation Input to output = 4,242Vdc
Leakage Current 3.5mA max.
OUTPUT
Rated Power for Convection Cooling 40W (CFM40T-07, 30W)
Maximum Power with 30 CFM Forced Air 50W (CFM40T-07, 40W)
Hold-up T
Short Circuit/ Over Load Protection On All Outputs (Auto Recovery)
Over Voltage Protection 3.6~4.6V/5.7~6.7V ON V1(3.3V/5V)
Adjustment Range +10% typ.
ENVIRONMENTAL
Operating Temperature 0 ~ 45°C
Storage Temperature -20 ~ 85°C
MECHANICAL CHARACTERISTICS
Dimensions
ime
20mS typ. @115V
120%~140% ON V2(12V/15V/24V)
101.6 x 50.8 x 30.48 mm
ac
www.powersolve.co.uk
ypical @ 25
T
C, nominal line and 75% load, unless other
°
wise specified
Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
AC-DC Converters
1.20 (30.48)
VR
4.00 (101.60)
3.75 (95.3)
1
2
3
4
5
6
1.75 (44.5)
2.00 (50.80)
ACL
ACN
www.powersolve.co.uk
MODEL OUTPUT OUTPUT CURRENT (A) RIPPLE VOLTAGE LINE LOAD O/P POWER EFF.
VOLTAGE Min. Rated Max (mVp-p) ACCURACY REG. REG. MAX (Typ.)
CFM40D-01
CFM40D-02
CFM40T-01
CFM40T-02
CFM40T-03
CFM40T-04
CFM40T-05
CFM40T-06
CFM40T-07
5V(V1) 0.4 3.2 5.0 50 ±3% ±1% ±3%
12V(V2) 0.2 2.0 2.5 120 ±4% ±2% ±5% 40.0W 77%
5V(V1) 0.4 3.2 5.0 50 ±3% ±1% ±3%
24V(V2) 0.2 1.0 1.5 240 ±4% ±2% ±5% 40.0W 78%
5V(V1) 0.4 3.0 5.0 50 ±3% ±1% ±3%
12V(V2) 0.2 2.0 2.5 120 ±4% ±2% ±5%
-5V(V3) 0 0.3 0.5 50 ±3% ±1% ±1% 40.5W 75%
5V(V1) 0.4 3.0 5.0 50 ±3% ±1% ±3%
12V(V2) 0.2 2.0 2.5 120 ±4% ±2% ±5%
-12V(V3) 0 0.3 0.5 120 ±3% ±1% ±1% 42.6W 75%
5V(V1) 0.4 3.0 5.0 50 ±3% ±1% ±3%
15V(V2) 0.2 1.5 2.3 150 ±4% ±2% ±5%
-15V(V3) 0 0.3 0.5 150 ±3% ±1% ±1% 42.0W 75%
5V(V1) 0.4 3.0 5.0 50 ±3% ±1% ±3%
24V(V2) 0.2 1.0 1.5 240 ±4% ±2% ±5%
-12V(V3) 0 0.3 0.5 120 ±3% ±1% ±1% 42.6W 75%
5V(V1) 0.4 3.0 5.0 50 ±3% ±1% ±3%
24V(V2) 0.2 1.0 1.5 240 ±4% ±2% ±5%
-5V(V3) 0 0.3 0.5 50 ±3% ±1% ±1% 40.5W 75%
5V(V1) 0.4 3.0 5.0 50 ±3% ±1% ±3%
24V(V2) 0.2 1.0 1.5 240 ±4% ±2% ±5%
12V(V3) 0 0.3 0.5 120 ±3% ±1% ±1% 42.6W 75%
3.3V(V1) 0.4 5.0 7.0 100 ±3% ±1% ±3%
5V(V2) 0.2 2.0 3.5 100 ±4% ±3% ±5%
-12V(V3) 0 0.3 0.5 120 ±3% ±1% ±1% 30.0W 70%
Note:
1. Voltage accuracy is set at full load.
Add a 0.1
2.
3.
Line regulation measured from 100Vac to 240Vac, full load.
4. Load regulation measured from 60% to 100% full load and from 60% to 20% load (60% +/- 40% load)
µF ceramic capacitor and a 10µF E.L. capacitor to output for Ripple & Noise measur
ement @20MHz BW
Pin Connection
Pin
1
2V1
3
4
5 COM
6
.
CFM40D/T
V2
V1
COM
V3
Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Loading...