Power Products LOGIC 8 Instruction Manual

www.power-products.com

INSTRUCTIONS

™

MODEL:LOGIC 8

8 AMP BATTERY CHARGER FOR 24V

LEAD ACID AND NICKEL CADMIUM BATTERIES

P/N:BR8A

Manufactured By: Power Products, Inc.

27 Pamaron Way Ste E

Novato, CA 94949

Cage Code: 3C8X4

Tel: [phone] Fax: [phone]

www.power-products.com

TABLE OF CONTENTS

PAGE 2 …………………………………….DESCRIPTION

PAGE 3 ………………………………… SPECIFICATION

PAGE 4……………………………………..ACCESSORIES

PAGE 5…………………….….….……….INSTRUCTIONS

PAGE 6……..………….CALIBRATION VERIFICATION

PAGE 7 ………………….CALIBRATION CERTIFICATE

PAGE 8………………………………………...WARRANTY

DESCRIPTION

A) The Logic 8 is a fully automatic 8 Amp batt ery charger for 24V
Lead Acid or Nickel Cadmium batteries. Method of charge is
constant potential with initial constant current. It is lightweight,
compact and will operate on any worldwide AC input from 100 to
240 volts.

B) The Logic 8 will pulse charge a highly discharged battery. When
voltage climbs to approximately 17 volts pulsing stops and smooth
ripple-free charge occurs.

C) The battery can be left ON even when loading the battery.

D) The Logic 8 monitors charge progression. If abnormal progression

occurs the CHARGE CUT-OFF led will illuminate and charging
will cease. This may be due to an internal battery problem, i.e.:
shorted cell. This prevents the battery from over heating.

E) When a battery is charged, a timed topping mode will begin. The

topping voltage is adjustable by setting the Lead Acid or NiCad
adjust. At the end of the topping mode, a green READY led will
illuminate and charge stops completely. This avoids battery
deterioration that is a result of lengthy trickle or float charge. The
charge cycle automatically repeats as the battery requires.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK

. NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO FACTORY

.