PowerPoint TW25 Instruction Manual

A

B

C

1

2

A

B

C

D

1

2

日期

签字

底图总号

旧底图总号

描校

描图

借(通)用件登记

日期

日期

标准化

处数

工艺

审核

设计

标记

更改文件号

审定
批准

校对

签名

张

第

张

共

广东美的集团股份有限公司

数

量

阶段标记

量重

比例

D

美的洗涤电器制造有限公司

REV.

1

1

1

00

英文用户手册

爱尔兰

TW25(9 2 40Y )

POWE RPO INT

6710002880

技术要求

商标颜色为 和

，

其他颜色为

规格为
如果供应商的排版需要加空白页 请加在最后

:

1. PANTONEBLACK C PANTONE 185 C
PANTONEBLACK C

2. A4

3. ,

80G双胶

TW25

This manual contains sections of Safety
Instructions,Operating Instructions,
Installation Instructions and Troubleshooting
Tips etc. Carefully reading it before using the
dishwasher will help you to use and maintain
the dishwasher properly.

To review the section on Troubleshooting Tips
will help you to solve some common problems
by yourself and not need t o ask for the help of
professional technicians.

ControlPanel........................2

DishwasherFeatures................. 2

WashCycleTable.................... 3

WaterSoftener...................... 4

Detergent...........................5

RinseAid...........................6

Loading the Dishwasher Rack . . . . . . . 7,8

Notsuitable for the dishwasher

Attheendofthewashcycle............9

FilteringSystem....................10

CaringfortheDishwasher......... 11

TurningOntheAppliance..............3

.

........ 9

..

AboutElectricityconnection..........12

WaterConnection...................13

Technicalinformation................14

Beforecallingforservice.......... 15,16

Error codes.................................. ......16

..................1

The manufacturer, following a policy of constant
development and up-dating of the product, may
make modifications without giving prior notice.

This appliance must be grounded. In the event
of a malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a
path of least resistance of electric current. This
appliance is equipped with a cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate
outlet that is installed and grounded in accordance
with all local codes and ordinances.

Improper connection of the equipment­grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or service representative if you
are in doubt whether the appliance is
properly grounded. Do not modify the plug
provided with the appliance; If it is not fit
for the outlet. Have a proper outlet installed
by a qualified electrician.





1



Keep children away from detergent and rinse aid, keep
child away from the open door of the dishwasher,
there could still be some detergent left inside.

ren



Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.



Do not touch the heating element during or
immediately after use.



Do not wash plastic items unless they are marked
dishwasher safe or the equivalent. For plastic

items n

ot so marked, check the manufacturer's

recommendations.

Use only detergent and rinse additives designed
for an automatic dishwasher. Never usesoap,
laundry detergent, or hand washing detergent
in your dishwasher.





During installation, the power supply must not
be excessively or dangerously bent or flattened.

The door should not be le ft in the open position
since this could present a tripping hazards.





Do not tamper with controls.





Do not place any heavy objects of stand on the door
when it is open. The appliance could tip forward.

When loading items to be washed:

1) Locate sharp items so that they are not likely to
damage the d oor seal;

2) Load sharp knives with the handles up to reduce
the risk of cut-type injuries.

3 Warning:Knives and other utensils with sharp points

must be loaded in thebasketwiththeirpoints down
or placed in a horizontal position.

)



When using your dishwasher, you should prevent
plastic item from contacting with heating element.



If the supply cord is damaged, it must be replaced
by themanufactureroritsservice agent or a
similarly qualified person in order to avoid a
hazard.



Please dispose of pa cking materials properly.




Use the dishwasher only for its intended function.



Remove the door to the washing c ompartment when
removing an old dishwasher from service or discarding it.

This appliance is not intended for use by persons
(including children ) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge ,
unless they have b een given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Dishwasher detergents are strongly alkaline,they
can be e xtremely dangerous if swallowed.Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.

Children should be supervised to ensure that they
do not play with the appliance.

Check that the detergent receptable is empty after
completion of the wash cycle.









Other means for disconnection from the supply must
be incorprated in the fixed wiring with at least 3mm
contact separation i n all poles.



The appliance is to be connected to the water main s
using new hose sets and thatold hose-setsshould
not be reused.



The maximum number of place settings to be washed
is 12.



The maximum per missible inlet water pressure is 1Mpa.



The minimum permissible inlet water pressure is 0.04Mpa.



Do not operate your dishwasher unless all
enclosure panels are properly inplace. Open
thedoorverycarefullyifthedishwasheris
operating, there is a risk of water squirting out.

To get the best performance from your dishwasher,read all operating instructions before using it for the
first time.

2

Upper Basket

Spray Arms

Lower Basket

Water Softener

Detergent Dispenser

Silverware BasketMain Filter

CupShelf

5
6

7
8

Rinse Aid Dispenser

Coarse Filter

Drain pipe connector

Inletpipe connector

9

10

12

11

3

2

14

11

12

1

2 3 4

5

6

7

8

9

6 Start / Reset Button: Press this button t o start or pause the

dishwasher,the selected program indicating light will blink
when starting.

9 Power Light : To come on when the ON/OFF Button is

Press d down.e

1 Pre-rinse light: Blink during pre-rinse.
2 Wash l ight: wash.Blink during
3 Rinse light: rinse.Blink during

4 Drying light: drying.Blink during

5 Door Handle: Pull it to open the door.

7 Washing Program Selector: Turn the knob clockwise to

select wash cycles.

NOTE:thismodel has a "broken remember" function, which

means that power sup ply broken down dur ing washing
will not reset the current washing program. So you can't

cancel a program by cutting off the power. Please

see the section entitled "change a program".

8 ON/OFF Button: To turn ON/OFF the power supply .

10

10 Salt and rinse aid warning lights: To come on when

the softener or dispenser needs to be refilled

Glass

Soak

EconomyNormal

Strong

1

2

3

4
5

6

7

8

9

10

If all the lights begin to glimmer, that indicates the machine is out of order, please turn off the main power and water supply
before calling a service.

3

3

4

5
6

7
8

1

Draw out the lower and upper basket, load the dishes and
push them back. It is commended that loading the lower
basket first, then the upper one

(see the section entitled

" Loading the Dishwasher " ).

Pressthe ON/OFF button

Turn the knob located on the right of the control panel in
the clockwise direction until the number or the symbol
for the cycle

Press the button to start the washing.

Start/Reset

When the washing is over, you can shut off the swtich by
pressing on/off button.

With a little force to ensure the door is properly closed.

NOTE:

A click could be heard when the door is closed

perfectly.

2

Pour in the detergent(see the section entitled,
"Salt,DetergentandRinseAid").

Insert the plug into the socket.
The power supply is 220-240VAC 50HZ, the specification
ofthesocketis10A250VAC,Makesurethatthewater
supply is turned on to full pressure.

For normally soiled loads,
such as , plates,glasses
and lightly soiled pans.
standard daily cycle.

pots

Pre-wash

-wash
Wash (45 ℃)
Rinse (65 ℃)
Drying

Pre

For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishesthat have
been sitting with dried food
on them for a while.

For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.

To rinse dishes that you
plan to wash later that day.

Normal

Strong

Economy

Soak

5/22 g

5/25 g

22 g

Pre-wash

-wash( 0℃
Wash (60 ℃)
Rinse
Rinse (70 ℃)
Drying

Pre 5 )

Pre-wash

The four program lights shows the state of the dishwasher:
a)All program lights off-----------------stand by
b)One of the program lights on-----------pause
c)One of the program lights blinking------run

Please press the Start/Reset button and last more than
three seconds, this will cancel the current programme.
(NOTE: turning off the appliance by pressing the on/off
button can not cancel the current programme, because
this model has a "broken remember" function.)

Turn around the to select the
desired programme.

Washing Program Selector

Press the Start/Reset button to start washing.

1

2

3

Premise

: A cycle that is underway can only be modified if it
has only been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may have
already drained the wash water. I this case, the detergent
dispensermust be refilled (see the paragraph entitled " Loading
the Detergent " ).

n

NOTE: If you open t he do or when washing, the machine
will pause. When you close the door and press the
Start/ button, the machine will keep on working after
10 seconds.

Reset

15 g.

Pre-wash
wash (40℃)

Drying

Rinse( 65℃)

For lightly soiled loads, such
as glasses, crystal and fine
china.

Pre-wash
Wash (50 ℃)
Rinse
Rinse (65 ℃)
Drying

Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:

Unscrew the cap from the salt container.

There is a ringon the container with an arrow on it (see Figure to the side), if
necessary, rotate the ring in the anticlockwise direction from the "-" Setting
toward the "+" sign, based on the hardness of the water being used.It is
recommended that adjustments should be made in accordance with the following
schema:

1

2

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes
and utensils.
The appliances is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the
water.

The dishwasher is designed to allow for adjusting the amount of salt consumed based on th e har dness of the water used.
This is intended to optimize and customize the level of salt consumption so that the salt consumption could be set proceed as
follows:

Remove the lower basket and then unscrew and remove the cap from the salt
container.

If you are filling the container for the first time ,fill 2/3 of its volume with water
(around 500ml).

Place the end of the funnel(supplied) into the hole and introduce about 1.2kg of
salt .It is normal for a small amount of water to come out of the salt container

Carefully screw the cap bac k on.

1

2

4

3

Usually, the salt warning light will be off in 2-6 days aft er the salt container be
filled with salt.

5

4

If your model have not water softener, you may skip this section.

1.

The salt container must be refilled when the salt warning light in the control panel comes on.

Though the salt container is filled enough, the indicator light may not black out
before the salt fully dissolve.

2.

If there is no salt warning light in the controlpanel (for some models) , you can judge when to load
the salt into the softener

by the cycles that the dishwasher had run (see the followingschema ).

If thereare spills of the salt, a soak program could be run to wipe them out.

5

If the water isn't too hard, you may also prevent the formation of deposits by adding detergent.

The dispenser must be refilledbefore the start of each wash cycle following the instructions provided in the" Wash Cycle
Table".Your dishwashers than conventional dishwashers. Generally, only one tablespoon of
detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just
before starting dishwasher,otherwise it could get damp and will not dissolve properly.

use less detergent and rinse aid

To remove hard water spots, try the following:

Run dishes through a normal wash program.
Remove all metal dishware, such as cutlery, pans, etc.,
from the dishwasher.
Do not add detergent.
Pour two cups of vinegar into a bowl and set the bowl face
up on the lower rack of the dishwasher.

Run the dishes through a normal wash program.
If this doesn't work, try the same process with 1 / 4 cup of
citric acid crystals instead of vinegar.

Dishwasher detergent is corrosive! Take care to keep it out
of reach of children.

Use only detergent specifically made for use in dishwashers.
Keep your detergent fresh and dry. Don't put powder detergent
into the dispenser until You're ready to wash dishes.

Detergent

for pre-wash

Detergent

for main wash

Contact your local water board for information on the hardness of your watersupply.

dH

mmol/l

0~140~8 0~1.4

/

0/

14~398~22 1.4~3.9 - 20 60

39~8022~45 3.9~8 Mid 40 30

>80>45 >8

+

60 20

fH

0~10

10~28

28~56

>56

Clark

°

Clark:Britishdegree

°

fH : French degree

°

dH : Germandegree

Note:1°dH=1.25°Clark=1.78°fH=0.178mmol/l

WATER HARDNESS

Selector Position

Salt consumption

(gram/cycle)

Auto nomy

(cycles/1.2k gs)

To open the dispenser, turn the cap to the "open" (left)
arrowand lift it out.
Pour the rinse aid into the dispenser, being careful not to
overfill.
Replace the cap by inserting it aligned with "open" arrow
and turning it to the closed (right) arrow.

A measured amount of rinse aid is released during the final rinse. As with detergent, the amount
of rinse aid needed for your dishes depends on the hardness of the water in your area. Too much
rinse aid can result in lather of foaming and cause cloudiness or steaks on your dishes. If the
water in your area is very soft, you may not need rinse aid. If you do,you can dilute the rinse aid
with an equal amount of water.
The rinse aid dispenser has six or four settings. Always start with the dispenser set on " 2 ". If
spots and poor drying are problems, increase the amount of rinse aid dispensed by removing the

dispenserlid and rotating the dial to "3". If the dishes still are not drying properly or arespotted,
adjust thedial to the next higher number until your dishes are spot-free. We suggest you
to set on "4" .(Factory value is "4".)

The rinse aid is released during the final rinse to prevent water
from forming droplets on your dishes that can leave spots and
streaks. It also improves drying by allowing water to "sheet" off
the dishes.

Your dishwashers are designed to use liquid rinse aids. The
rinse aid dispenser is located inside the door next to the
detergentdispenser. To fill the dispenser, open the cap and
pour the rinse aid into the dispenser until the level indicator
turns completely black. The volume of the rinse aid container is
about 140m l.

Be careful not to overfill the dispenser, because this could
cause oversudsing. Wipe away any spills with a damp cloth.
Don't forget to replace the cap before you close the dishwasher
door.
If you have soft water, you may not need rinse aid for it may
cause a white film to develop on your dishes.

If there is no rinse aid warning light in the control panel, you can judge the amount of rinse aid by the following means. The
black dot on the rinse aid dispenser indicates the amount of rinse aid in the dispenser. As the rinse aid diminishes, the size of
the black dot decreases. You should never let the rinse aid get below 1 / 4 full.

Asthe rinse aiddiminishes,thesize of the blackdot on therinse
aid level indicator changes, as illustrated below.

Full
3/4full
1/2full
1 / 4 full - Should refill to eliminate spotting
Empty

6

7

The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well
as plates, small bowls and shallow pans(as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.

If required,the height of the upper rack can be adjuested in order to creat more space for large utensils either in the upper rack
or lower rack.
Long items,serving cutlery,salad serversor knives should be placed on the shelf so that they do not obstruct the rotation of the
spray arms. The shelf can be folded back or removed when not required for use.

The upper r ack can be adjusted for height by putting wheels of different height into the rails.

Scrape off any large amounts of left-over food. It is not necessary to rinse the dishes under running water.
Place objects in the dishwasher in following way

1.Items such as cups, glasses, pots/pans, etc. are stood upside down.

2.Curve items, or those with recesses, should be at a slant so that water can run off.

3.They are stacked securely and cannot tip over.

4.They do not prevent the spray arms from rotating while washing takes place.

Very small items shouldnot be washed in the dishwasher as they could easily fall out of the racks

Removing the dishes
To prevent water dripping from the upper back onto the dishes in the lower back, we recommend that you empty the lower basket first
and then the upper back..

6

5

5

1

Cups

2

Small serving bowl

3

Largeserving bowl

4

Glasses

Saucers

5

6

Dish

Dessert dishes

3

4

1

7

7

4

2

1

1

We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,
serving dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the
top spray arm.

Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.

The bottom rack feature fold down tine rows so that larger or more pots and pans can be loaded.

To stacking of pots and pans,
the spikes canbe folded down.

improve

8

IN

8

Oval platter

10

Soup plates

Dessert dishes

7

9

Dinner plates

11

Silverware basket

7

8

9

10

10

11

4

9

Silverware s hould be placed in the silverware basket with handles at the bottom:If therack has side baskets, the spoonshould
be loaded individually into the appropriate slots, Especially long utensils should be plac ed in the h orizontal position at the
front of the upper rack.

Wooden cutlery and utensils-these will leach out and become unsightly.
Sensitiveornamental glasses, craft utensil and vases,special antiqueor irretrievable utensils.These ornaments are not

dishwasher-proof.
Plastic parts sensitive to hot water.

Copper and tin utensils.
Utensils which are soiled with ash,wax,lubricating grease or ink.
Absorbent materials such as sponges and cloths.

Aluninium and silver parts have a tendency to discolour and fade during the wash cycle.Even some types of glass may turn
cloudy after many wash cycles.

In future buy utensils which identified as dishwasher-proof.

Possible causes:

Type of glass or manufacturing process.
Chemicalcompositionof detergent.
Water temperature and duration of dishwasher programme.

Suggested remedy:

Use glassware or porcelain dishes that have been marked 'dishwasher-proof' by the manufacturer .
Use a mild detergent that is described as 'kind t o dishes'.if necessary,seek further information from degergent manufacturers.
Select a programme with as low a temperature.
To prevent damage,take glass and cutlery out of the dishwasher as soon as possibleafter the programme has ended.

When the working cycle has finished, the buzzer of dishwasher will mooing 8 second ,then stop .
Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of
the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes
and utensils while they are still hot and more susceptible to breakage. They will also dry better.

Teaspoons

4

Soup spoons

2

Forks

1

Serving fork

8

Serving spoon

6

Knife

5

3

Dessert spoons

7

Gravyladle

4
4

3

8

2

6

7

4

4

4

5

4

4

4

4

1
1

1

1
1
1

1
1
1

4

4

4

1
1
1

5
5

5
5
5

5
5
5

5
5
5

2
2

2
2
2

2
2
2

2
2
2

3

3

3

3

3

3

3

3

3

3

3

6

4

Do not let any item extend through bottom.

A forgotten dish can be added any time before the detergent cup opens.

Pleasepress the tart buttonS /Reset .

Do not open the door until the water spray action stops.
Steam may rise out of the dishwasher.

Add forgotten dishes.

Close the door and S /ResetPress the button to start washing.tart

4

3

2

1

10

The filter prevent larger remnants of food or other objects from getting inside the pump. This residue can
occasionally clog up the filters.

The filter system consists of a coarse filter,a flat (Main filter)
And a microfilter(Fine filter).

Main filter

Food and soil particles trapped by this filter are pulverized by a
special jet on the lower spray arm and washed down the
drain.

Coarse filter

Larger items, such as pieces of bone or glass, that could clog

the drain are trapped in the coarse filter. To remove an item

caught in this filter, gently squeeze the taps on the top of this

filter and lift it out.

Fine filter

This filter holds soil and food residue in the sump area and

prevents it from being redeposit on the dishes during a cycle.

- Inspect the filters for obstructions every time the dishwasher has been used.

- By unscrewing the coarse filter.you can remove the filter system.Remove any food remnants and clean the
filters under running water.

1

2

3

2

3

1

2

3

step１：contrarotate the C ,
and then lift it up;

oarse filter

step２：lift the Main filter up

step 3： lift the Fine filter up

If do it from step1 to step 3, the filter system will be removed; while if do it from step3 to step 1, the filter system
will be installed.

NOTE

：

1

If your dishwasher is left in an unheated place during the winter, as k a service tec hnicia n to:

Cut off electrical power to the dishwasher.

Turn off the water supply and disconnect the wa ter
inlet pipe from the water valve.

Drain water from the inlet and water valve.pipe
(Use a pan to catch the water.)

Reconnect the water inlet to the
water valve.

pipe

Remove the filter in the tub the bottom
and use a sponge to soak up water
in sump.

5

4

3

2

1

It is necessary to clean the spray arms regularly for hard water chemicals will clog the
spray arm jets and bearings. To remove the spray arm, screw off the nut clockwise to take
out the washer on top of the spray arm and remove the arm. Wash the arms in soapyand
warm waterand use a soft brush to clean the jets. Replace them after rinsing them
thoroughly.

Filter assembly
For best performance and results, the filter assembly must be cleaned.
The filter efficiently removes food particles from the wash water, allowing it to be
recirculated during the cycle. Forthis reason,itis a goodidea to remove the larger
food particles trapped in the filter after each wash cycle by rinsing thesemic ircular
filter and cup under running water. To remove the filter assembly, pull o n the cup
handle in the upward direction.The entire filter assembly should be cleaned
once a week.
To clean the coarse filter and the fine filter, use a cleaning brush. Then, reassemble
the filter parts as shown inthe figures left and reinsert the entire assembly in the
dishwasher, positioning in its seat and pressing downward.
The dishwasher must never be used without the filters. Improper replacement of the
filter may reduce the performance level of the appliance and damage dishes and utensils.

Neverrun the dishwasher without the filters in place.
When cleaning the filters, don't knock on them .Otherwise t he filters could be contorted and the performance of dishwasher could
be debased.

11

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed
to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.

To clean the edge around the door, you should use only a soft warm, damp rag. Toprevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on thesurface.

After every wash, turn off the water supply to the
appliance and leave the door slightly a jar s o that
moisture andodors are not trapped inside.

Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.

To clean the exterior and rubber parts of thedishwasher,
do not use solvents or abrasive cleaning products.
Rather, use only a cloth and warm soapy water.
To remove spotsor stains fromthesurface of the
interior, usea cloth dampened with water and a little
white vinegar, or a cleaning prod uct made specifically
for dishwashers.

When you go on ho liday, it is recommened that you r un a
wash cyc le with the dishwasher e mpty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming
within the appliance.

If the appliance mus t be moved, try to keep it in the vertical
position.If absolutely necessary, it can be positioned on
its back.

One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.

Please see the rating lable to know the rating voltage and connect the dishwasher to appropriate power supply,Use required fuse
12 amp. Fused electrical supply is required-copper wire only. Time delay fuse or circuit breaker recommended and provide

separate circuit serving only this appliance. Outlet should be placed in adjacent cabinet.

After making sure that the voltage and the frequency values for the current in the home
correspond to those on the rating plate and thatthe electrical system is sized for the
maximum voltage on the rating plate, insert the plug into an electrical socke t which is
earthedproperly. If the electrical socket to which the appliancemust be connected is not

appropriate for the , replace the socket, rather than using a adaptors or thelikeas

they could cause overheating and burns.

plug

12

13

If the sink is 1000 higher from the floor, the excess water in hoses cannot
be drained directly into the sink. It will be necessary to drain excess
water from hoses into a bowl or suitable container that is held outside and lower

than the sink.

Connect the coldwater supply hoseto a threaded 3/4(inch) connector andmake sure that it is
fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, letthe water
runtomakesurethatthewaterisclearandfreeofimpurities.Ifthisprecaution is not taken,
there is a risk that the water inlet can get blocked and damage the appliance.

The water supply to the appliance can also be connected to the house hot waterline
(centralized system, heating system),as long as it does not exceed a temperature of 60 C.
In this case, the wash cycle time will be shortened by about 15 minutes and thewash
efficiency slightly reduced.
The connection must be made to the hot water line following the same procedures as those
for the connection to the cold water line.

Insert the drain hose into a drain pipe with a minimum diameter of 40 mm, or let it run into the sink, making sure to avoid bending
or crimping it. Use the special plastic support that comes with the appliance. The free end of the hose must be at a height
between 400 and 1000mm and must not be immersed in water.

Once the appliance is positioned,adjust the feet (screwing them in or out) to adjust the
height of the dishwasher, making it level. In any case ,the appliance should not be inclined
more than 2 .

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent
cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positionedto the right or the left to
facilitate proper installation.

In order to avoid that there is more water

staying in the inlet hose,please close the hydrant

after using.(For the models: no safety inlet hose.)

If the sink is 1000 higher from the floor, the excess water in hoses cannot
be drained directly into the sink. It will be necessary to drain excess
water from hoses into a bowl or suitable container that is held outside and lower

than the sink.

φ40mm

600

580

850

1135

14

Dimension: 600x580x850(mm)
Capacity: 12 Place setting

ater pressure: 0.04-1.0MPa

Power supply: See rating label

W

Fuse blown, or the
circuit breaker acted

Replace fuse or reset circuit breaker. Remove any other
appliances sharing the same circuit with the dishwasher

Sound from soft food shredding action and detergent cup
opening.

Utensils are not secure
in the baskets or something
small has dropped into
the basket

To ensure everything is secured in the dishwasher.

Motor hums Dishwasher has not been used regularly. If you do not use it

often, remember to set it to fill and pump out every week,
which will help keep the seal moist.

Improper detergent

Add 1 ga llon of cold water to the tub. Close and latch the
dishwasher, then drain out the water by slowly turning the
Dial until a drain period is reached. Repeat if necessary.

Spilled rinse agent Always wipe up rinse agent

spills immediately.

Detergent with
colorant was used

Make sure that the detergent is the one without colorant.

Rinse agent dispenser
is empty

Make sure that the rinse agent dispense is filled.

Improper program

Improper rack loading Make sure that the action of the detergent dispenser and

spray arms are not bloc ked by large dishware.

Extremely hard water
Low inlet
temperature
Overloading the
dishwasher
Improper lo ading
Old or damp powder
detergent
Empty rinse agent
dispenser
Incorrect dosage of

detergent

To remove spots from glassware:

Take out all metal utensils out of the dishwasher.
Do not add detergent.
Choose the longest cycle.
Start the dishwasher and allow it to run for about
18 to 22 minutes, then it will be in the main wash.
Open the door to pour 2 cups of white vinegar
into the bottom of the dishwasher.
Close the door and let the dishwasher complete

the cycle. If the vinegar does not work: Repeat
as above, except use 1/4 cup (60 ml)of citric acid
crystals instead of vine gar.

Some audible sounds are
normal

'

Make sure the dishwasher is turned on and the door is
closed securely.

Check that the water supply is connected properly and
the water is turned on.

Make sure the power cord is properly plugged into the
wall socket.

Power supply is not
turned on

Water pressure is low

'

Overflow

The system is designed to detect an overflow. When it
does, it shuts off the circulation pump and turns on the
drain pump.

Sel ect s tronger pr og ram

Use only the special dishwasher detergent to avoid suds.

If this occurs, open the dishwasher and let suds evaporate.

15

Combination of soft
water and too much
detergent

Use less detergent if you have soft water and select a
shortest cycle to wash the glassware and to get them clean.

Tea or coffee stains using a solution of 1/2 cup of bleach and 3 cups warm water

to remove the stains by hand.

You have to wait for 20 minutes after a cycle to let the heating
elements cool down before cleaning interior; otherwise, burns
will happen.

Iron deposits in water
can cause an overall film

You have to call a water softener company for a special filter.

Hard water minerals To clean the interior, use a damp sponge with dishwasher

detergent and wear rubber gloves. Never use any other cleaner
than dishwasher detergent for the risk of foaming or suds.

Dial is not in the
position

OFF

Turn the Dial to

OFF position and slide the door latch to the

left.

Dishes block detergent
cups

Re-loading the dishes properly.

Normal phenomenon

There is some steam coming through the gap under the door
during drying and water draining.

Aluminum utensils have
rubbed against dishes

Use a mild abrasive cleaner to eliminate those marks.

'

This is normal A small amount of clean water around the outlet on

the tub bottom at the back of the tub keeps the water
seal lubricated.

Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead
to overflowing. Wipe away any spills with a damp cloth.

Make sure the dishwasher is level.

Overfill dispenser or rinse
aid spills

Dishwasher isn t level

'

16

Longer inlet time.

Faucets is not opened.

Longer draining time.

The installation position of the drain pipe is too high.

Longer heating time,
but not reaching required temperature

Malfunction of temperature sensor or of heating element.

Overfilled.

Too much inlet water. .

Failure of temperature sensor

Short circuit or break of temperature sensor

Open circuit or break of temperature sensor

Failure of temperature sensor

DISPOSAL: Do not dispose this product as unsorted municipal

waste. Collectionof such waste separately for special treatment is necessary.

This product was supplied by Shomar Ltd, Dublin. Our contact details can be foundonourwebsiteWWW.SHOMAR.IE