Powerplus POWXQ5104 User Manual
POWXQ5104 EN
1 APPLICATION ................................................................................ 3
2 DESCRIPTION (FIG A) ................................................................... 3
3 PACKAGE CONTENTS .................................................................. 3
4 SYMBOLS ....................................................................................... 4
5 GENERAL SAFETY INSTRUCTIONS ............................................ 4
5.1 Work area ............................................................................................................... 4
5.2 Electrical safety. .................................................................................................... 4
5.3 Personal safety ...................................................................................................... 5
5.4 Power tool use and care ........................................................................................ 5
5.5 Service .................................................................................................................... 5
6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS .. 6
7 ASSEMBLY / MOUNTING ACCESSORIES ................................... 6
7.1 Mounting / adjusting / removing the guard .......................................................... 6
7.1.1 Mounting/installing the guard. (Fig 1) ....................................................................... 7
7.1.2 Repositioning (turn) / removing the guard ................................................................ 7
7.2 Installing / replacing the grinding wheel (fig 2) .................................................... 7
7.2.1 Test run for new grinding wheels ............................................................................. 7
7.3 Carbon brushes (fig 4) ........................................................................................... 7
7.4 Mounting the side handle (Fig 5) .......................................................................... 8
8 OPERATION.................................................................................... 8
8.1 Pay special attention when starting the machine ................................................ 8
8.2 Switching On (Fig 6) .............................................................................................. 8
8.3 Switching Off (Fig 7) ................................ .............................................................. 8
9 USE .................................................................................................. 9
9.1 Working direction (fig 8) ........................................................................................ 9
9.2 (Rough) grinding (fig 9) ......................................................................................... 9
9.3 Cutting .................................................................................................................... 9
10 CLEANING AND MAINTENANCE ................................................. 9
10.1 Cleaning ................................................................................................................. 9
10.2 Lubrication ............................................................................................................. 9
Copyright © 2012 VARO NV P a g e | 1 www.varo.com
POWXQ5104 EN
10.3 Carbon brushes ..................................................................................................... 9
10.4 mains cable & plug ................................................................................................ 9
11 TECHNICAL DATA ....................................................................... 10
12 SOUND EMISSION ....................................................................... 10
13 STORAGE ..................................................................................... 10
14 WARRANTY .................................................................................. 11
15 ENVIRONMENT ............................................................................ 11
16 DECLARATION OF CONFORMITY ............................................. 12
Copyright © 2012 VARO NV P a g e | 2 www.varo.com
POWXQ5104 EN
POWXQ5104 ANGLE GRINDER 125MM –1300W
1 APPLICATION
This machine is developed for cutting, grinding and roughing metal and stone. With help of the
correct accessories the machine can also be used for brushing and sanding.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. ON/OFF-switch
2. Guard
3. Side handle
4. Guard quick release lever
5. Spindle lock
6. Lock-on safety switch
3 PACKAGE CONTENTS
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with plastic
bags! Danger of suffocation!
1 Angle grinder with soft grip, disc guard with quick clamp system and 4m rubber cable with
swivel ball cable restraint
1 Side handle
1 Spanner
1 Set carbon brushes
1 Instruction manual
When parts are missing or damaged, please contact your dealer.
Copyright © 2012 VARO NV P a g e | 3 www.varo.com
POWXQ5104 EN
Read instructions
carefully
Keep bystanders away
Always wear safety
goggles
Always wear protective
gloves
Always wear a dust mask.
.
Always wear hearing
protection
Denotes risk of personal
injury or damage to the
tool.
In accordance with
essential applicable safety
standards of European
directives
Class II machine –
Double insulation – You
don’t need any earthed
plug.
Remove the plug from the
mains
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
5 GENERAL SAFETY INSTRUCTIONS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
5.1 Work area
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2 Electrical safety.
Always check that the power supply corresponds to the voltage on the rating
plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
Copyright © 2012 VARO NV P a g e | 4 www.varo.com
Loading...