Powerplus POWXG2032 User Manual

Download

Page 1

POWXG2032 EN

1 APPLIANCE ....................................................................................... 3

2 DESCRIPTION ................................................................................... 3

3 PACKAGE CONTENT LIST .............................................................. 3

4 EXPLANATION OF USED SYMBOLS .............................................. 3

5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4

5.1 Work area .................................................................................................................. 4

5.2 Electrical safety ......................................................................................................... 4

5.3 Personal safety ......................................................................................................... 4

5.4 Power tool use and care ........................................................................................... 5

5.5 Service ....................................................................................................................... 5

6 SPECIAL SAFETY REGULATIONS FOR CORDLESS

GRASS/HEDGE SHEAR ................................................................... 5

6.1 Shrub shears safety warning ................................................................................... 5

6.2 Grass shears safety warning .................................................................................... 5

6.3 Battery/Battery charger safety warnings ................................................................. 6

7 OPERATION ...................................................................................... 6

7.1 Charging procedure .................................................................................................. 6

7.1.1 Battery power status display........................................................................................ 7

7.2 Switching on/off ........................................................................................................ 7

7.2.1 Starting: ...................................................................................................................... 7

7.2.2 Stopping: ..................................................................................................................... 7

7.3 Changing the blade ................................................................................................... 8

7.3.1 Removing .................................................................................................................... 8

7.3.2 Fitting .......................................................................................................................... 8

8 WORKING INSTRUCTIONS .............................................................. 9

8.1 Shrub shear ............................................................................................................... 9

8.1.1 Cutting hedges ............................................................................................................ 9

8.2 Grass shear ............................................................................................................... 9

8.2.1 Edging ........................................................................................................................ 9

9 MAINTENANCE ................................................................................. 9

Page 2

POWXG2032 EN

9.1 Blade maintenance ................................................................................................. 10

9.2 Cleaning/ storage .................................................................................................... 10

9.3 Service department ................................................................................................. 10

10 TECHNICAL DATA .......................................................................... 10

11 NOISE ............................................................................................... 10

12 WARRANTY ..................................................................................... 10

13 ENVIRONMENT ............................................................................... 11

13.1 Battery pack ............................................................................................................ 11

14 DECLARATION OF CONFORMITY ................................................ 12

Page 3

POWXG2032 EN

Read manual before usage

Battery charger contains a safety transformer.

Never operate the machine in the rain or in damp or wet condition. Moisture is a shock hazard.

Only use the battery charger indoors.

Warning! The cutting means continues to move after the motor is switched off.

LITHIUM ION GRASS/HEDGE SHEAR 7.2V POWXG2032

1 APPLIANCE

This item is produced for light shearing and trimming of shrubs, small hedges and grass in domestic use. It’s not designed for commercial use.

WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions.

2 DESCRIPTION

1. Blade

2. Button for battery power status display

3. Charger LED-indicator

4. Safety lock

5. Handle with TPR soft grip

3 PACKAGE CONTENT LIST

 Remove all packing materials  Remove remaining packaging and transit supports (if existing)  Check the completeness of the packing content  Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

 Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

6. On/Off switch

7. SDS drive cover

8. Battery charger

9. ABS soft housing

10. SDS drive cover release button

1 x Shrub shear blade 1 x Grass shear blade 2 x Blade guard (fitted)

When parts are missing or damaged, please contact your dealer.

4 EXPLANATION OF USED SYMBOLS

1 x Battery charger 1 x Operating instructions 1 x Metal box

Page 4

POWXG2032 EN

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

5.1 Work area

 Keep work area clean and well lit. Cluttered and dark areas invite accidents.  Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

 Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

 Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

 When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

 Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries.

 Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

 Remove any adjusting key or wrench before turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

 Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

Page 5

POWXG2032 EN

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

 Keep handles dry, clean and free from oil and grease. Slippery handles do not allow for

safe handling and control of the tool in unexpected situations.

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related hazards.

5.4 Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could lead to a hazardous situation.

5.5 Service

 Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 SPECIAL SAFETY REGULATIONS FOR CORDLESS GRASS/HEDGE

SHEAR

6.1 Shrub shears safety warning

 Keep all parts of the body away from the cutter blade. Do not remove cut material or hold

material to be cut when blades are moving.

 Make sure the switch is off when clearing jammed material. A moment of inattention while

operating the machine may result in serious personal injury.

 Carry the machine by the handle with the cutter blade stopped. When transporting or

storing the machine always fit the cutting device cover. Proper handling of the machine will reduce possible personal injury from the cutter blades.

 Keep cables away from cutting area. During operation the cable may be hidden in shrubs

and can be accidentally cut by the blade.

6.2 Grass shears safety warning

 Keep supply and extension cords away from cutting means.  Use the machine only in daylight or good artificial light.

Page 6

POWXG2032 EN

 Never operate the machine with damaged guards or shields or without guards or shields in

place.

 Switch on the motor only when the hands and feet are away from the cutting means.  Always disconnect the machine from the power supply (i. e. remove the plug from the

mains or remove the disabling device)

 whenever leaving the machine unattended  before clearing a blockage  before checking, cleaning or working on the unit  after striking a foreign object  whenever the machine starts vibrating abnormally

 Take care against injury to feet and hands from the cutting means.  Always ensure that the ventilation openings are kept clear of debris.

6.3 Battery/Battery charger safety warnings

 Protect the battery charger from rain and moisture. The penetration of water in a battery

charger increases the risk of electric shock.

 Recharge only with the charger specified by the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of fire when used with another battery pack.

 Do not charge other batteries. The battery charger is suitable only for charging lithium ion

batteries of POWXG2032. Otherwise danger, fire and explosion may occur.

 Keep the battery charger clean. Contamination may cause the danger of electric shock.  Check the battery charger, cable and plug each time before using. Do not use the battery

charger when defects are detected. Do not open the battery charger yourself and have it repaired only by qualified personnel using original spare parts. Damaged battery chargers, cables and plugs increase the risk of electric shock.

 Do not operate the battery charger on easily inflammable surfaces (e. g. paper, textiles,

etc.) or in combustible environments. There is danger of fire due to the heating of the battery charger during charging.

 Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

 Do not open the battery yourself. There is danger of a short circuit.  Protect the battery against heat, e.g., including against continuous sun irradiation and fire.

There is a danger of explosion.

 Do not short-circuit the battery. There is a danger of explosion.  In case of damage and improper use of the battery, vapours may be emitted. In case of

complaints, provide for fresh air and consult a physician. The vapours can irritate the respiratory system.

7 OPERATION

7.1 Charging procedure

The battery charger supplied matches only to the Li-ion battery installed in POWXG2032. Do not use other battery chargers.

The Li-ion battery is protected against deep discharging.

When the battery is empty, the machine is switched off by means of a protective circuit: The blade no longer moves and a slight whistling sound can be heard.

If the On/Off switch is subject to continued use, the Li-ion battery can be damaged.

Page 7

POWXG2032 EN

The charging process starts as soon as the small plug (8a) is inserted in the machine and when the mains plug (8b) of the battery charger is inserted in the socket. When charging starts only the red light will be lit. After charging 1-2 hours the red and yellow light will be lit. After charging 3-5 hours or fully charged red, yellow and green light will be lit.

By pressing button 2, the charge status is displayed by three multi-colored LED lights.

Lights lit

Battery power status

Red

<6.0V

Red + yellow

6.0V – 7.0V

Red + yellow + green

7.0V – 7.2V

During the charging procedure, the handle of the machine warms up. This is normal.

When not using for extended periods, disconnect the battery charger from the socket.

Do not use the machine during the charging procedure.

7.1.1 Battery power status display

Once only the red LED is lit, the trimmer must be re-charged.

7.2 Switching on/off

7.2.1 Starting:

 Push in safety lock 4 and press On/Off switch 6 at the same time.  Release safety lock 4.

7.2.2 Stopping:

 Release the On/Off switch 6.

Page 8

7.3 Changing the blade

 Push the SDS-blade cover release button

10 and slide the cover 7 towards the On/Off switch 6.

 Lift away from the housing.  Lift the blade 1 out.

 Fit the blade as shown aligning the holes

in the blade onto the drive pins.

 When refitting the SDS drive cover

ensure all 4 location legs are inside the housing prior to sliding cover into place.

 Slide the blade cover back towards the

blade 1 to secure.

Wear gloves when changing the blade.

7.3.1 Removing

7.3.2 Fitting

POWXG2032 EN

Page 9

POWXG2032 EN

8 WORKING INSTRUCTIONS

Keep your fingers away from the blades.

8.1 Shrub shear

8.1.1 Cutting hedges

Before cutting check the hedge for foreign objects e. g. wire fences.

Cut stems up to 8 mm in thickness. When cutting, move steadily along the line of cut, so that stems are fed directly into the cutter blades. The double edge of the cutting blade enables cutting to either direction, or with a side to side motion. After use replace the blade transport guard. Recommended cutting/trimming times:

 Cut hedges with deciduous leaves in June and October.  Cut evergreen hedges in April and August.  Cut conifer and other fast growing shrubs approx. every six weeks from May onwards.

8.2 Grass shear

8.2.1 Edging

Guide the machine along the edge of the lawn. Do not allow the blade to contact paved surfaces, stones or garden walls, since this will wear the blade rapidly.

9 MAINTENANCE

Note: To ensure long and reliable service, carry out the following maintenance regularly.

 Check for obvious defects such as loose, dislodged or damaged blade, loose fixings and

worn or damaged components.

 Check that covers and guards are undamaged and correctly fitted. Carry out necessary

maintenance or repairs before using.

 If the machine should happen to fail despite the care taken in manufacturing and testing,

repair should be carried out by our technical department.

Page 10

POWXG2032 EN

Type

POWXG2032

Mains voltage (charger unit)

220-240V / 50Hz

No load speed

1000 min-1

Running time

50 min

Battery type

Li-Ion

Battery Voltage

7.2V

Battery Capacity

1.3Ah

Charging time (empty battery)

5-6h

Acoustic pressure level LpA

84 dB(A)

Acoustic power level LwA

96 dB(A)

aw (Vibration):

3.3 m/s²

K = 1.5 m/s²

9.1 Blade maintenance

Always clean the cutting blades after operation and lubricate with oil. During longer cutting jobs, we recommend periodically lubricating the cutting blade. Visually check the condition of the cutting edges of the cutting blade. Ensure that the blade is covered with the blade guard supplied when not in use.

9.2 Cleaning/ storage

Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all debris, especially from the ventilation slots. Store the machine in a secure dry place out of reach of children. Do not place other objects on top of the machine.

9.3 Service department

 Damaged switches must be replaced by our after-sales service department.  If the connecting cable (or mains plug) is damaged, it must be replaced by a particular

connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician).

10 TECHNICAL DATA

11 NOISE

Noise emission values measured according to relevant standard. (K=3)

ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).

12 WARRANTY

 This product is warranted for a 36-month period effective from the date of purchase by the

first user.

 This warranty covers all material or production flaws excluding : batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

 We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

Page 11

POWXG2032 EN

 Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

 You can always obtain more information at the number 00 32 3 292 92 90.  Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

 At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneus net voltage. This list is not exhaustive.

 Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

 Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

 We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.).

 Your purchase receipt must be kept as proof of date of purchase.  Your appliance must be returned undismantled to your dealer in an acceptably clean state,

(in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.

 Your tool must be charged at least 1x per month to ensure optimal operation of this tool.

13 ENVIRONMENT

Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice.

13.1 Battery pack

This product contains Li-ion. To preserve natural resources, please recycle or dispose of batteries properly. Local, state or federal laws may prohibit disposal of Li-ion batteries in ordinary trash. Consult you local waste authority for information regarding available recycling and/or disposal options.

Page 12

POWXG2032 EN

14 DECLARATION OF CONFORMITY

VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,

Product: Lithium Ion Grass/Hedge Shear 7.2V trade mark: POWERplus model: POWXG2032

is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.

European Directives (including, if applicable, their amendments up to the date of signature);

2011/65/EU 2004/108/EC 2006/42/EC 2000/14/EC Annex V LwA 85 dB(A) / 86 dB(A)

European harmonized standards (including, if applicable, their amendments up to the date of signature);

EN60745-1 : 2009 EN60745-2-15 : 2009 EN60335-1 : 2012 EN50636-2-94 : 2014 EN55014-1 : 2006 EN55014-2 : 1997

Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy N.V.

The undersigned acts on behalf of the company CEO,

Hugo Cuypers Regulatory Affairs – Compliance Manager 01/09/14