Powerplus POWXG2004 User Manual

Download

Page 1

1 2 3 4 5

5.1

5.2

5.3

5.4

5.5

6.1

6.2

6.3

7 8 9

POWXG2004

APPLICATION .................................................................................. 2

DESCRIPTION ................................................................................. 2

PACKAGE CONTENT LIST ............................................................. 2

SYMBOLS ........................................................................................ 2

GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

Work area ................................................................................................................ 3

Electrical safety ....................................................................................................... 3

Personal safety ....................................................................................................... 3

Power tool use and care ......................................................................................... 4

Service ..................................................................................................................... 4

OPERATION ..................................................................................... 4

Mounting the hand guard ....................................................................................... 4

Starting the machine ............................................................................................... 4

Cutting hedge .......................................................................................................... 5

CLEANING AND MAINTENANCE ................................................... 5

TECHNICAL DATA .......................................................................... 5

WARRANTY ..................................................................................... 6

ENVIRONMENT ............................................................................... 7

DECLARATION OF CONFORMITY ................................................ 7

P a g e | 1

www.varo.com

Page 2

POWXG2004

EN HEDGE TRIMMER 580W 580MM POWXG2004

1 APPLICATION

The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other use of the trimmer, not included in this manual, could damage the trimmer or seriously injure the operator and is therefore expressively excluded from the application range.

WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.

2 DESCRIPTION

1. Cable

2. Rear handle

3. On/off switch

4. Cable holder

5. Ventilation slots

3 PACKAGE CONTENT LIST

 Remove all packing materials  Remove remaining packaging and transit supports (if existing)  Check the completeness of the packing content  Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

 Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

6. Front handle with safety switch

7. Safety protection cover

8. Blade

9. Impact Protection

10. Safety blade cover

Hedge trimmer Safety blade cover Safety protection cover Manual

When parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Denotes risk of personal injury or damage to the tool.

Read instructions carefully

Wear safety glasses and ear protection

P a g e | 2

www.varo.com

Page 3

POWXG2004

Never operate the machine in the rain or in damp or wet condition. Moisture is a shock hazard.

Keep hands away from blades, Don’t touch the blades when starting or while operating the unit.

Remove the plug from the mains Class II - The machine is double insulated; Earthing wire is therefore not

necessary.

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool .

5.1 Work area

 Keep work area clean and well lit. Cluttered and dark areas invite accidents.  Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

 Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

 Always check that the power supply corresponds to the voltage on the rating plate.  Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

 Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

 When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

 Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

P a g e | 3

www.varo.com

Page 4

POWXG2004

 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries.

 Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

 Remove any adjusting key or wrench before turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

 Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related hazards.

5.4 Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could lead to a hazardous situation.

5.5 Service

 Have your power tool serviced by a qualified person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

6 OPERATION

6.1 Mounting the hand guard

Push the supplied hand guard over the blades and fix securely with each screws on both sides of the housing.

6.2 Starting the machine

 Switching on: Press the on/off switch (3) of the front handle (6) and the switch (2) of the

rear handle with both hands at the same time.

 Switching off: release any one of the switch (6) or (2 ).

P a g e | 4

www.varo.com

Page 5

POWXG2004

Type POWXG2004

 The electronic blade brake makes the blades stop immediately within 0.5 sec. the small

flash in the area of the upper ventilation slots is normal and dose not harm to you or the machine.

6.3 Cutting hedge

Before you start your work, select branches with a diameter not bigger than 20mm and cut them with a pruning shear. A trapezoidal cut corresponds to the natural, growth of plants and results in optimal hedge growing.  First cut the sides from the bottom to the top. Cut the upper part giving it the shape you

prefer, in a straight horizontal form, roof-like or rounded.

 The safety blade has laterally rounded and staggered cutting teeth to reduce danger of

injury. The additional shock protection avoids inconvenient kickback when the blades come into contact with walls, fences etc.

 If the blades are jammed or blocked by obstacles, switch the motor off immediately, pull

the plug, and then remove the object jamming the blades.

 Caution! Metal obstacles like fences etc. may damaged the cutting blades.  Always make sure to keep the extension cord behind your back and to start cutting the

hedge at the point nearest to the supply socked. Therefore plan your working direction before staring.

7 CLEANING AND MAINTENANCE

Warning! Before performing any work on the equipment, pull the power plug.

 Check your machine regularly before starting the work.  Damaged cutting blades have to be repaired or exchanged by a qualified service man

before working with the machine

 After each cutting operation, clean the cutting blade with a soft brush and cloth with

lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.

 Always keep the ventilation slots in motor housing clean  Never clean or spray a machine with water .clean the motor housing only with a moist

cloth and never apply detergents or solvents! These could ruin the plastic parts of the machine ,Finally, dry the motor housing carefully.

 Store the machine with the supplied protection cover(10)  Only use original accessories and spare parts.

8 TECHNICAL DATA

Voltage ~Frequency 230-240V ~50Hz Power input 580 W Blade length 580 mm Cutting length 514 mm Cutting capacity 20 mm No load speed 1700 /min Weight 2,95 kg

P a g e | 5

www.varo.com

Page 6

POWXG2004

9 NOISE

Noise values measured according to relevant standard. (K=3) Acoustic pressure level LpA 76 dB(A)

Acoustic power level LwA 103 dB(A)

ATTENTION! The sound power level may exceed 85 dB(A), in this case individual hearing protection shall be worn.

aw (Vibration) 3,4 m/s² K = 1,5 m/s²

10 WARRANTY

 This product is warranted for a 36-month period effective from the date of purchase by the

first user.

 This warranty covers all material or production flaws. It does not include defective parts

subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 This warranty covers all material or production flaws, excluding batteries, chargers,

defective parts subject to normal wear and tear such as, in particular, bearings, brushes, cables, plugs… Accessories such as drills, drill bits, saw blades etc. also do not fall under this warranty.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

 We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

 Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

 You can always obtain more information at the number 00 32 3 292 92 90.  Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

 At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneus net voltage. This list is not exhaustive.

 Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

 Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

 We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.).

 Your purchase receipt must be kept as proof of date of purchase.  Your appliance must be returned undismantled to your dealer in an acceptably clean state,

(in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.

P a g e | 6

www.varo.com

Page 7

POWXG2004

11 ENVIRONMENT

Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice.

12 DECLARATION OF CONFORMITY

VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,

Product : Hedge Trimmer Trade mark : POWERplus Model : POWXG2004

Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.

European Directives (including, if applicable, their amending directives):

2004/108/EC 2006/42/EC 2000/14/EC Annex V LwA 96dB(A) / 103dB(A)

European harmonized standards (including, if applicable, their amendments):

EN60745-1 : 2009 EN60745-2-15 : 2009 EN55014-1 : 2006 EN55014-2 : 1997 EN61000-3-2 : 2006 EN61000-3-3 : 2008

The undersigned acts on behalf and under the power of attorney of the company management,

Philippe Vankerkhove Certification Manager Date: 01/10/2012

P a g e | 7

www.varo.com