Powerplus POWX204 User Manual

POWX204 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 6

6 SPECIFIC SAFETY WARNINGS ..................................................... 6

6.1 User. ......................................................................................................................... 6

6.2 Blades : .................................................................................................................... 6

6.3 Workpiece : ............................................................................................................. 6

6.4 Machine: .................................................................................................................. 6

6.5 Residual risks .......................................................................................................... 6

7 ASSEMBLY ...................................................................................... 6

7.1 Placement of the appliance .................................................................................... 7

7.2 Installations of the parallel guide – jointer protector (Fig D) ............................... 7

7.3 Installations of lateral guide inclinable to 45° à 90° .............................................. 7

7.4 Installations of the height adjustment grips (Fig F1 & 2): .................................... 7

7.5 Adjustment of cutting depth : ............................................................................... 7

7.6 Replacing and adjusting the cutting edges (FIG H ) : .......................................... 7

7.7 Using the blade adjuster (Fig I) ............................................................................. 8

7.8 Installing chip extractors ........................................................................................ 8

8 BEFORE USING THE TOOL FOR THE FIRST TIME ..................... 9

8.1 Thermal protector (Fig A) ....................................................................................... 9

8.2 Dust collection ........................................................................................................ 9

9 OPERATION ..................................................................................... 9

9.1 Switching on. ........................................................................................................... 9

POWX204 EN

10 CLEANING AND MAINTENANCE ................................................. 10

10.1 Cleaning................................................................................................................. 10

10.2 Lubrication ............................................................................................................ 10

10.3 Replacing the belt : ............................................................................................... 10

10.4 Replacing Coal Brushes ....................................................................................... 10

11 TECHNICAL DATA ........................................................................ 11

12 NOISE ............................................................................................. 11

13 SERVICE DEPARTMENT .............................................................. 11

14 STORAGE ...................................................................................... 11

15 TROUBLE SHOOTING .................................................................. 12

16 WARRANTY ................................................................................... 12

17 ENVIRONMENT ............................................................................. 13

18 DECLARATION OF CONFORMITY .............................................. 13

POWX204 EN

JOINTER PLANER 204MM POWX204

1 APPLICATION

This jointer-planer can be used for all kinds of truing and finishing work in wood, e.g., facing, straightening. thinning, planing and jointing of natural wood up to 204 mm in width. It is not designed for commercial use.

Use this tool only for the type of work for which it has been designed. Any use other then those indicated in this manual is a misuse. In the event the user alone is responsible for damages or injuries stemming from such misuse. The manufacturer shall not be held responsible for any modification made to the tool or for any damage that might result from said modifications. Finally, use of this planer in accordance with the instructions in the present manual does not in itself guarantee the elimination of all residual risk factors.

WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.

2 DESCRIPTION (FIG A)

1. Adaptor for dust extraction

2. Dust extraction hood

3. Height adjustment for infeed table

4. Infeed table/ Trueing

5. Cover profile for cutter shaft

6. Height adjustment for cutter shaft cover profile

7. Gearbox cover

8. ON/OFF Power switch / safety switch

9. Overload protection

10. Rubber foot

11. Thickness planer

12. Outfeed table/ Trueing

13. Trueing stop

14. Height adjustment for thickness planer

3 PACKAGE CONTENT LIST

 Remove all packing materials  Remove remaining packaging and transit supports (if existing)  Check the completeness of the packing content  Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

 Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

Jointer Planer manual Accessories (Fig B) A = Adjusting tool B = spacer C = flat spanner

D = 2 planer knives (210 x 16,5 x 1,5 mm) ( mounted on machine) E = 2 infeed boxes F = hexagonal wrenches

POWX204 EN

Denotes risk of personal injury or damage to the tool.

Read manual before use

Wear eye protection

Wear gloves

In accordance with essential requirements of the European directive(s)

Pieces packed separately in the box (must be installed and/or utilised during the adjustment and use of the appliance) (FIG C)

1. Parallel guides

2. Blade protector

3. Connector + chip extractor bus for planer mode

4. Lever for adjusting height of appliance

5. Tool for adjusting blades

6. Connector+ chip extractor bus for truing

When parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

5.1 Work area

 Keep work area clean and well lit. Cluttered and dark areas invite accidents.  Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

 Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

+ 9 hidden pages

Powerplus POWX204 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual