Powerplus POWX1751 User manual

POWX1751 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG 1 & 2) .............................................................. 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY WARNINGS ..................................................... 6

6.1 Do’s .......................................................................................................................... 6

6.2 Don’ts ...................................................................................................................... 6

6.3 Things you should know ........................................................................................ 7

7 ASSEMBLY ...................................................................................... 7

7.1 Point to know when setting up the compressor ................................................... 7

7.2 Fitting the wheels .................................................................................................... 7

7.3 Fitting the supporting foot...................................................................................... 7

8 USE ................................................................................................... 7

8.1 Voltage ..................................................................................................................... 7

8.2 Switching ON/OFF ................................................................................................... 7

8.3 Adjusting the pressure ........................................................................................... 7

8.4 Safety valve ............................................................................................................. 8

9 PNEUMATIC CHISEL/HAMMER SET ............................................. 8

9.1 Appliance ................................................................................................................. 8

9.2 Loading and operation (Fig. 6) ............................................................................... 8

10 BLOW GUN ...................................................................................... 8

11 PNEUMATIC 2-IN-1 COMBI NAILER .............................................. 9

11.1 Application .............................................................................................................. 9

11.2 Tool use ................................................................................................................... 9

POWX1751 EN

12 CLEANING AND MAINTENANCE ................................................. 10

12.1 Cleaning................................................................................................................. 10

12.2 Maintenance .......................................................................................................... 10

13 TECHNICAL DATA ........................................................................ 10

14 NOISE ............................................................................................. 10

15 STORAGE ...................................................................................... 10

16 TROUBLE SHOOTING .................................................................. 11

17 WARRANTY ................................................................................... 12

18 ENVIRONMENT ............................................................................. 12

19 DECLARATION OF CONFORMITY .............................................. 13

POWX1751 EN

OILLESS COMPRESSOR POWX1751

1 APPLICATION

The compressor is designed for generating compressed air for tools operated by compressed air. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes. The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.

2 DESCRIPTION (FIG 1 & 2)

1. Shroud

2. Pressure vessel

3. Wheel

4. Supporting foot

5. Quick-lock coupling

6. Pressure gauge

7. Pressure regulator

8. ON/OFF switch

9. Transportation handle

10. Pressure switch (under shroud)

11. Receiver condensation drainage tap

12. Screw

13. Nut

14. Washer

3 PACKAGE CONTENT LIST

▪ Remove all packing materials ▪ Remove remaining packaging and transit supports (if existing) ▪ Check the completeness of the packing content ▪ Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

▪ Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

Compressor Manual Inflating gun (E) 3 nozzles (C) Blow nozzle (D)

5 m spiral hose (B) Pneumatic chisel/hammer set (G) Pneumatic 2 in 1 combi nailer (F) 1 compressed air gun (with manometer) (A)

When parts are missing or damaged, please contact your dealer.

POWX1751 EN

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Before use, read the handbook carefully

Warning, hot surfaces

Wear ear guards and goggles

Danger - automatic control (closed loop)

Dangerous voltage

Wear gloves

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

5.1 Work area

▪ Keep work area clean and well lit. Cluttered and dark areas invite accidents. ▪ Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

▪ Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

▪ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

▪ Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

▪ Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

▪ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

▪ When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

▪ If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

+ 9 hidden pages

Powerplus POWX1751 User manual

Specifications and Main Features

Frequently Asked Questions

User Manual