Powerplus POWX1152 User Manual

POWX1152 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION(FIG.1) ...................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS 4

7 BEFORE USING THE TOOL FOR THE FIRST TIME ..................... 5

7.1 Fitting and changing tools (Fig. 2) ......................................................................... 5

7.2 Removing SDS-plus tool ........................................................................................ 5

8 OPERATION ..................................................................................... 6

8.1 Switching ON/OFF ................................................................................................... 6

8.2 Handle attachment (Fig. 3)...................................................................................... 6

8.3 Depth stop ............................................................................................................... 6

8.4 Dust collection device (Fig. 4) ................................................................................ 6

8.5 Hammer / drill switch .............................................................................................. 6

9 CLEANING AND MAINTENANCE ................................................... 7

9.1 Cleaning................................................................................................................... 7

9.2 Replacing Coal Brushes ......................................................................................... 7

10 TECHNICAL DATA .......................................................................... 7

11 NOISE ............................................................................................... 7

12 SERVICE DEPARTMENT ................................................................ 8

13 STORAGE ........................................................................................ 8

14 WARRANTY ..................................................................................... 8

15 ENVIRONMENT ............................................................................... 9

16 DECLARATION OF CONFORMITY ................................................ 9

POWX1152 EN

HAMMER DRILL 1250W POWX1152

1 APPLICATION

The machine is intended for hammer drilling in concrete, brick and stone, as well as for light chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. It is not designed for commercial use.

Warning! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.

2 DESCRIPTION(FIG.1)

1. Dust cap

2. Fastening sleeve

3. Auxiliary handle

4. Oil cover

5. Hammer stop

6. Drill stop

3 PACKAGE CONTENT LIST

 Remove all packing materials  Remove remaining packaging and transit supports (if existing)  Check the completeness of the packing content  Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

 Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

7. AVS system (Anti Vibration System)

8. On/off switch

9. Depth stop

10. Handle

11. Carbon brush cover

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

 Hammer drill 1250W  Depth stop  Auxiliary handle  Keyless chuck + adaptor  Dust cap  Set of spare cole brushes

- 3 SDS drills Ø8-10 & 12 x 150mm

- SDS point chisel: 250mm

- SDS flat chisel: 22 x 250mm

When parts are missing or damaged, please contact your dealer.

4 SYMBOLS

Read manual before use

In accordance with essential requirements of the European directive(s)

Class II - The machine is double insulated; Earthing wire is therefore not necessary.

Always wear safety goggles

In this manual and/or on the machine the following symbols are used:

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

5.1 Work area

 Keep work area clean and well lit. Cluttered and dark areas invite accidents.  Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

 Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

 Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

 When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

 Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries.

POWX1152 EN

+ 6 hidden pages

Powerplus POWX1152 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual