Powerplus POWX083 User Manual
POWX083 EN
1 APPLICATION ............................................................................. 2
2 DESCRIPTION (FIG A° ................................................................ 2
3 PACKAGE CONTENT LIST ......................................................... 2
4 SYMBOLS .................................................................................... 3
5 GENERAL POWER TOOL SAFETY WARNINGS ....................... 3
5.1 Working area ................................ ................................................................ ........... 3
5.2 Electrical safety ....................................................................................................... 3
5.3 Personal safety ....................................................................................................... 3
5.4 Power tool use and care ......................................................................................... 4
5.5 Service ..................................................................................................................... 4
6 SPECIFIC SAFETY INSTRUCTIONS .......................................... 4
7 OPERATION ................................................................................ 5
7.1 Preparatio((Fig 2) .................................................................................................... 5
7.2 Switching on and off ............................................................................................... 5
7.3 Continuous operation ............................................................................................. 5
7.4 Speed preselection ................................................................................................. 5
7.5 Gear selector switch ............................................................................................... 5
8 MAINTENANCE AND CLEANING ............................................... 6
8.1 Cleaning................................................................................................................... 6
9 TECHNICAL DATA ...................................................................... 6
10 NOISE .......................................................................................... 6
11 SERVICE DEPARTMENT ............................................................ 6
12 STORAGE .................................................................................... 6
13 WARRANTY ................................................................................. 7
14 ENVIRONMENT ........................................................................... 7
15 DECLARATION OF CONFORMITY ............................................. 8
Copyright © 2014 VARO NV P a g e | 1 www.varo.com
POWX083 EN
CONCRETE-PAINT MIXER
POWX083
1 APPLICATION
This tool is suitable for mixing a variety of materials in liquid form. Any use other than that for
which the tool is intended or any modification of the tool can lead to a serious risk of accident.
The manufacturer cannot assume liability for damages arising out of improper use of the tool.
Light liquids and mixtures, such as paint, varnish or plaster.
Heavier liquids and mixtures, such as adhesives, wallpaper paste, fillers or mortar.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A°
1. ON/OFF switch
2. Locking button
3. Air vents
4. Tool holding fixture
5. Gear selection switch
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
6. Handle
7. Speed controller
8. Spanner
9. Mixing tool
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x stirrer
1 x two-piece mixer bar
2 x wrench
Manual
When parts are missing or damaged, please contact your dealer.
Copyright © 2014 VARO NV P a g e | 2 www.varo.com
POWX083 EN
Read manual before usage
Denotes risk of personal injury
or damage to the tool.
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
In accordance with essential
applicable safety standards of
European directives
Wear noise protection
Wear a mask In dusty
conditions
Wear eye protection
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mainsoperated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will
reduce the risk of an electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it
will increase the risk of an electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of an electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention when operating a power tool may result in serious
personal injury.
Copyright © 2014 VARO NV P a g e | 3 www.varo.com
Loading...