LED FOLDABLE, RECHARGEABLE WORKLIGHT
Read the manual before using the machine
POWLI424 EN
POWLI424
WARNING! For your own safety, read this manual and the general
safety instructions carefully before using the spotlight. Your
spotlight should only be given to other users together with these
instructions.
1 DESCRIPTION (FIG. A)
1. Top light
2. On/Off switch
3. Charger socket
4. Charging indicator
5. AC/DC adapter
6. 12V car adapter
7. Magnet
8. Rubberized protection cover
9. Hanging hook
2 CONTENTS
Remove all packaging materials.
Remove remaining packaging and packing inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
Keep the packaging materials as far as possible until the end of the warranty period.
Then take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play
with plastic bags! There is a danger of suffocation!
1 x spotlight
1 x 12V car adapter
1 x AC/DC adapter
1 x manual
If any parts are missing or damaged, please contact your dealer.
3 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Copyright © 2014 VARO P a g e | 1 www.varo.com
POWLI424 EN
In accordance with essential applicable safety standards of European
directives
4 WARNINGS
Do not use if any parts are broken, bent, cracked or damaged. Any work light that
appears damaged in any way or operates abnormally must be removed from service
immediately. Inspect before each use.
This work light is not to be used by children. Keep out of reach of children.
Do not leave work light on and unattended.
Do not expose to fire or high temperatures; the battery may explode.
Do not charge or use near open flames or glowing embers.
Do not shine directly into eyes.
Never block lens and reflector during operation.
Do not store the work light for an extended period of time. Charge the battery every
three months during storage.
Do not charge the battery for an extended period of time. Overcharging will greatly
shorten battery life.
You must give the work light battery a top-up charge at the time of purchase.
Avoid charging at temperatures below 4℃.
The DC charging plug may very warm when in use. Unplug from receptacle with
caution.
5 OPERATION
5.1 Magnets
The work light features 3 magnets at the back of the housing, allowing the light to be
magnetically attached to a vehicle or other metal objects.
NOTE Do not place the light on or near computer equipment,
computer disks or other types of magnetic storage equipment as
strong magnetic fields can erase or corrupt data.
5.2 Different modes
Press the on/off switch to turn on the top flashlight.
Press the on/off switch again, one side of the light (40pcs LED) will turn on. Press the
switch one more time and the other side will turn on too. Now all 80pcs LED will be lit.
Press the on/off switch one more time to turn off the work light.
5.3 Foldable sides
You can fold out the sides up to an angle of 270°. When closed it’s easy for storage.
6 CHARGING THE BATTERY
Do not charge the light for an extended period of time. Overcharging
will shorten battery life or damage the unit.
Copyright © 2014 VARO P a g e | 2 www.varo.com
In order to ensure peak battery performace, it is recommended that
Model
POWLI424
Nominal lifetime
50,000 Hours
Battery
Battery type
Li-ion
Battery pack
3.7V-1800mAh
Charging time
6-8 hour
Top light
Bulb type
0.5W LED
Working time
20 hours
Side lights
Bulb type
80* 0.06W LED
Working time 1 side (40pcs LED)
3 hours
Working time 2 sides (80pcs LED)
1.5 hours
the work light be fully charged before being used for the first time.
The battery should be recharged every three months.
6.1 AC/DC adaptor
Insert the charger plug into the DC jacket and plug the charger into a supply socket.
The red charging LED will light up.
Make sure that the voltage rating of the supply corresponds with that of the charger.
The time required to fully charge the unit is about six to eight hours.
When the battery is fully charged, the red LED indicator will turn green. When it does,
unplug the AC/DC adaptor from the wall outlet and unit.
6.2 12V DC car adaptor
Plug the car adapter into the cigarette lighter socket of your car and insert the
adaptor plug into the DC jack of the light.
The time required to fully charge the unit is about six to eight hours.
When the battery is fully charged, the red LED indicator will turn green. Then unplug
the 12 V DC adapter from the car socket and DC jack.
Important note: use the supplied charger only. Other chargers may
cause damage to the unit.
POWLI424 EN
7 TECHNICAL DATA
Copyright © 2014 VARO P a g e | 3 www.varo.com
8 ENVIRONMENT
IMPORTANT: BATTERY DISPOSAL:
This product contains Li-ion. To preserve natural resources, please recycle or dispose of
batteries properly. Local, state or federal laws may prohibit disposal of Li-ion batteries in
ordinary trash. Consult you local waste authority for information regarding available
recycling and/or disposal options.
Should your spotlight need replacement after extended use, do not put it
in the domestic waste but dispose of it in an environmentally safe way.
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
POWLI424 EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
Loading...