Powerplus POW1900 User Manual
POW1900 EN
1 APPLICATION ................................................................................... 2
2 DESCRIPTION (FIG A) ...................................................................... 2
3 PACKAGE CONTENT LIST .............................................................. 2
4 SYMBOLS .......................................................................................... 3
5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 3
5.1 Work area .................................................................................................................. 3
5.2 Electrical safety ......................................................................................................... 3
5.3 Personal safety ......................................................................................................... 4
5.4 Power tool use and care ........................................................................................... 4
5.5 Service ....................................................................................................................... 4
6 ADDITIONAL SAFETY INSTRUCTIONS FOR USE OF POWER
MIXERS .............................................................................................. 4
7 OPERATION ...................................................................................... 5
7.1 Preparation ................................................................................................................ 5
7.2 Switching on and off ................................................................................................. 5
7.3 Variable speed selection .......................................................................................... 5
8 CLEANING AND MAINTENANCE .................................................... 6
8.1 Cleaning ..................................................................................................................... 6
9 TECHNICAL DATA ............................................................................ 6
10 NOISE ................................................................................................. 6
11 SERVICE DEPARTMENT .................................................................. 6
12 STORAGE .......................................................................................... 6
13 WARRANTTY .................................................................................... 7
14 ENVIRONMENT ................................................................................. 7
15 DECLARATION OF CONFORMITY .................................................. 8
Copyright © 2014 VARO P a g e | 1 www.varo.com
POW1900 EN
CONCRETE-PAINT MIXER 1200W
POW1900
1 APPLICATION
Your electronic power mixer is designed to mix and stir:
Light liquids and mixtures, such as paint, varnish or plaster.
Heavier liquids and mixtures, such as adhesives, wallpaper paste, fillers or mortar.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Mixer bar (adaptor)
2. Mixer bar (mixer)
3. Mixer spindle
4. On/Off switch
5. Safety switch
6. Speed regulator
7. Handles
8. Motor housing
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
Warning Packing materials are no toys! Children must not play with plastic
bags! Danger of suffocation!
1 x stirrer 1200W
1 x two-piece mixer bar
1 x manual
When parts are missing or damaged, please contact your dealer.
Copyright © 2014 VARO P a g e | 2 www.varo.com
POW1900 EN
Read manual before usage
Denotes risk of personal injury
or damage to the tool.
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
In accordance with essential
applicable safety standards of
European directives
Mandatory use of eye
protection.
Wear gloves
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
5.1 Work area
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Copyright © 2014 VARO P a g e | 3 www.varo.com
Loading...