DUD SERIES - DUAL OUTPUT, 6 WATT
DESCRIPTION
DUD unregulated, dual output DC/DC converters
offer excellent isolation in an industry standard 1” x 2”
package. Available in 5V and 12V input versions, the
DUD is perfect for industrial, datacom, or telecom
applications. The DUD features short circuit
protection, six-sided shielding, and 500 VDC isolation.
Se le ction Cha r t
Model
DUD512
DUD515
DUD518
DUD1212
DUD1215
DUD1218
Note: For model options, see the last page of this file.
Input Range
VDC
4.65 - 5.5 0 ±12 ±0.25 0
4.65 - 5.5 0 ±15 ±0.20 0
4.65 - 5.5 0 ±18 ±0.16 5
10.90 - 13. 20 ±12 ±0.25 0
10.90 - 13. 20 ±15 ±0.20 0
10.90 - 13. 20 ±18 ±0.16 5
Output VDC Output Current
FEATURES
• Industry Standard
1” x 2” Package
• Industry Standard
Pinout
• 85°C Case Operation
2.00”
(50.8mm)
0.40”
(10.2mm)
• 5V Input
• Input LC Filter
• 500V Isolation
• Short Circuit
Protection
1.00”
(25.4mm)
1
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION SUFFIX APPLICABLE SERIES REMARKS
Negative Logic N HAS, HBD, HBS, HES, LES, QBS,
Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES
Terminal Strip TS XWS, XWD, XWT
Trim 1 IAS, LES
Enable 2 I A D, IAS, LES, SMS
Trim and Enable 3 I AS, LES
Current Share 4 S MS
Headerless Y Encapsulated EWS, IWS, OWS
PIN LENGTH AND HEATSINK
OPTIONS
0.110” (2.8mm) Pin Length 8 All Units (Except SMS)
0.150” (3.8mm) Pin Length 9 All Units (Except SMS)
0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM
0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM
0.45” (11.4mm) Horizontal
Heatsink
0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM
0.95” (24.1mm) Horizontal
Heatsink
0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM
2H All Units (Except DIP, SIP, and SM
3H All Units (Except DIP, SIP, and SM
QES, TES, TQD
Packages)
Packages)
Packages)
Packages)
Packages)
Packages)
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
Standard Pin Length is 0.180”
(4.6mm)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
2