PowerOak PS1 User Manual

PS 1 USER MANUAL

ATTENTION:

Strictly follow this user manual and pay close attention to all warnings. Please DO NOT operate before reading this USER MANUAL.

Page 2 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

NOTICES

• PowerOak™ products are protected by patent law.

• PowerOak reserves the right to modify or change parts of or all the specifications and pricing policies at company’s sole decision.

• PowerOak shall not be liable for losses caused by either incidental or

consequential use in connection with the furnishing, use or performance of this manual as well as any information contained therein.

• Any part of this document is forbidden to be copied or edited without prior written approval of PowerOak.

• Information in this publication replaces all previously corresponding material.

PRODUCT CERTIFICATION

PowerOak guarantees this product conforms to the national and industrial standards or that the standard conformance certification is in progress.

Publication Number: PS ONE

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contain herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of the products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither PowerOak nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Page 3 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

TABLE OF CONTENTS

NOTICES ......................................................................................................... 2

PRODUCT CERTIFICATION .............................................................................. 2

TABLE OF CONTENTS ...................................................................................... 3

Introduction ................................................................................................... 4

➢ Foreword ............................................................................................ 4

➢ Applicable ........................................................................................... 4

➢ Product Description ........................................................................... 4

Safety Precaution ........................................................................................... 5

Usage and Maintenance ................................................................................ 5

Work Diagram of the Generator .................................................................... 6

Unpacking ...................................................................................................... 7

➢ Unpack Checking ................................................................................ 7

Operation Instruction .................................................................................... 7

➢ Power on and Power Off .................................................................... 7

➢ Display ................................................................................................ 8

Trouble Shooting ............................................................................................ 9

➢ System Failure Diagnosing ............................................................... 10

Specification ................................................................................................. 12

Contact us .................................................................................................... 13

Page 4 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

Introduction

➢ Foreword

This Manual provides a detailed introduction regarding the use of the generator. Please read the user instructions thoroughly in order to benefit from all the possibilities your generator can offer.

➢ Applicable

By reading this manual, the user can understand the usage and operation of the generator. Should any questions arise during installation, please contact your installer or customer support (see page 8).

➢ Product Description

This portable solar generator is developed by PowerOak, it’s a smart,

portable, home and camping, solar generator battery. This PowerOak generator has an integrated MPPT solar charge controller, inverter, system controller, lithium battery, DC 12V, USB QC3.0, USB-C PD2.0 and BMS. Store green solar energy in the battery for later use. This item is perfect for when the homes main power fails, the generator can be used for powering computers, mobile phones and small appliances. This product is safe, reliable, and easy to use.

A LCD B POWER C DC ON D AC ON E USB PORT F USB 3.0 G DC OUT H TYPE C PORT I AC IN J AC OUT

Page 5 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

Safety Precaution

1. Please read the “Safety Precautions” before use to ensure safe and

proper operation of PS ONE. Keep this manual in a safe and secure place. Warranty will be null and void if the user fails to follow all warning and cautions in this manual.

2. Please follow all warnings when operating this unit.

3. Keep the generator away from direct sun, rain, and humid

conditions.

4. Keep the generator away from heat sources like, electric heaters,

ovens, furnaces, etc.

5. Keep a safe distance, approximately 4-6 inches, for ventilation and

follow the manual when installing.

6. Please power off and use dry cloths when cleaning.

7. In the event of electrical fire, only use dry powder fire extinguisher.

There is a danger of electric shock if a liquid fire extinguisher is used.

8. DO NOT open the case or touch any internal parts or wiring. Only

connect cables to the provided external ports.

9. Please contact PowerOak or a certified electrician for any

maintenance needs. (See page 8 for contact information)

Usage and Maintenance

1. Working and storage conditions will affect the batteries overall life

and reliability, please follow the environmental conditions stated below:

• Only operate when temperatures are between 0°C~40°C with

relative humidity between 5%~90%.

• Avoid places with constant vibrations or shocks.

• Avoid environments with metal dust, corrosive substances, salt, or

flammable gases are present.

2. Please place the generator in an area where there is good

ventilation, away from water, flammable gases, corrosive materials, and other dangerous goods.

3. For extended storage, place unit in dry environment, with

temperatures between 0°C~+35°C.

Page 6 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

Work Diagram of the Generator

Page 7 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

Unpacking

➢ Unpack Checking

Please check if the box has been damaged before opening. After unpacking, please check if product appearance is damaged, or if there are any missing parts. If so, please contact PowerOak. (See Page 13)

NO.

ITEM.

QUANTITY

A

PowerOak PS ONE

1

B

AC wall charger (with AC charging cable)

1

C

solar charging cable (7909 to MC4)

1

D

Type-C cable

1

E

cigarette lighter adapter (6530 to

1

F

F manual, warranty card, certificate of

1

Operation Instruction

➢ Power on and Power Off

Main functions of POWER ON/OFF button

1. POWER ON: Press the POWER button. The LED lights up. Screen

turns on.

2. POWER OFF: Press the POWER button for 2 seconds. The screen

turns off. LED lights off.

Main functions of DC ON/OFF button

1. Turn on the DC power: Press the DC ON/OFF button for 2 seconds. LED lights up, and screen shows “DC ON”.

2.Turn off the DC power: Press the DC ON/OFF button for 2 seconds. LED lights off, and the screen shows “DC OFF”.

Main functions of AC ON/OFF button

1. Turn on the AC power: Press the AC ON/OFF button for 2 seconds. Back LED lights up, and screen shows “AC ON”.

2.Turn off the AC power: Press the AC ON/OFF button for 2 seconds. Back LED lights off, and the screen shows “AC OFF”.

Page 8 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

NOTICE: Before turning on the POWER ON/OFF BUTTON, both DC ON/OFF

button and AC ON/OFF button don’t work. After turning on the POWER

ON/OFF BUTTON, both DC ON/OFF button and AC ON/OFF button are in OFF status.

➢ Display

DC ON/OFF button

Page 9 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

NOTICE:

1. When a function fails, the error code will show on “Charging power”, “DC output power”, “AC output power”.

2.Screen backlight will turn off after a while with no operation, and it will turn on again when pressing any button.

Trouble Shooting

This generator has been fully tested prior to shipping. Contact PowerOak customer service if any failure occurs. During a call, please provide us with the following information.

Failure Description

• Serial No.

• Model No.

• Information shows on screen

• Describe in detail what error is happening.

• Is it possible to repeat the problem, if so, what are the steps?

• Did it happen before? Why did it happen?

Solar panel used to charge the generator

• Manufacturer name and model

• Output power of PV

• Output voltage of PV

• Output voltage of MPPT

• Output current of MPPT

• How many solar panels are hooked up?

Page 10 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

➢ System Failure Diagnosing

Failure

code

Cause

Solution

E01

Over Temperature Protection

Check that the ambient temperature is not higher than 45°C.

E02

Battery pack Over Voltage Protection

Disconnect the charger and restart the unit.

E03

Battery Damage Protection

Contact PowerOak.

E10

Too low temperature when discharging

The temperature of the battery is too low. Increase battery temperature.

E11

Battery Low Voltage Protection

Please charge immediately. Fully charge unit then restart.

E12

Inverter Over Current Protection

Check if the AC output overloaded or shortcircuited.

E13

Inverter Over Load Protection

Check if the AC output overload, please refer to the technical spec for overload ability.

E14

Inverter Short - Circuit Protection

Check if the AC output overloaded or shortcircuited.

E16

Charging Over Voltage Protection

Check if the input voltage exceeds the maximum value.

E17

Too low temperature when charging

The temperature of the battery is too low. Increase battery temperature to charge.

E21

12V 10A Output Over Current Protection

Check if the output overloaded or shortcircuited.

E22

12V 10A Output Over Load Protection

Check if the output overload.

Page 11 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

E27

Total output power overloaded

Reduce the load power.

E28

Over temperature when charging

The unit is too hot. Continue charging once the temperature gets lower.

E29

Over temperature when discharging

The unit is too hot. Continue discharging once the temperature gets lower.

Page 12 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

Specification

Model

PSONE-P1

PSONE-P2

Battery capacity

200Wh

Output Spec

AC output

Rated Output Power

120W

Max. Output Power

200W(1s)

Rated Output Voltage

110Vac

230Vac

Rated Frequency

50/60HZ

Power Factor

1

THDV

<3%

Overload ability

125W< Load <150W@10s 150W< Load <180@5s 180W< Load <200W@1s

No-load consumption

<8W

<15W

>70% load power) Max.

efficiency

90%

DC12V output Output Voltage Range

10-12.6V

Rated Output Current

10A

Overload Current

>11A

USB-A1 output

Fast charge support devices

BC1.2, Apple, Samsung

Output Voltage Range

510.25V

Rated Output Current

2.4A

Overload Current

2.6-3.5A

USB-A2 output Fast charge devices

QC3.0

Output Voltage Range

5-12V (Default 5v)

Rated Output Current

5V/2.5A, 9V/2A. 12V/1.5A

5V/2.5A, 9V/2A, 12V/1.5A

Overload Current

2.6-3.5A

USB-C output

Fast charge Support

PD protocol

Output Voltage Range

(Default 5v)

5-20V (Default 5v)

Rated Output

5-20V/2.25A

Overload Current

2.25-3.5A

PV Input

Max Input Power

60W

Input voltage range

14-40Vdc

MPPT Input Voltage

15-40Vdc

Max. Input voltage

40Vdc

MPPT Efficiency

99.50%

Max Efficiency

>90%

Solar Charging Mode

MPPT

Battery

Rated Voltage

11.1 Vdc

Rated capacity (Wh)

200Wh

Cell type

Li-ion

Configuration

3S8P

Max Voltage

12.6V

Min. Voltage

10.0V

The max. working temperature

40r

40 r

The min. working temperature

or

General

IP

IP 21

Working condition

Relative Humidity: 5%-90%

Temperature: 0-40*C

Warranty

One year

Dimension

196*65*255mm

Weight

2.7Kg (Net Weight)

Page 13 of 13

PS 1 U

SER MANUAL

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

Contact us

Should you have any technical or other questions, please contact PowerOak with following information

1.System model

2.System serial No.

3.System failure Code

4.Displaying information

Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland

M +31 (0) 40 240 5888 | E info@poweroak.nl | W www.poweroak.nl

Volg ons op:

KvK: 65077687

BTW: NL.8559.71.289.B.01

PowerOak PS1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual