MESSAGE
FROM REX
Rexair sells the Rainbow Cleaner only to independent Authorized Distributors who are
experienced in direct in-the-home selling. Since Rexair does not market its product
through national advertising, awareness of the product is created by the individual efforts
of thousands of direct selling “dealers,” who, by means of in-home demonstrations
create interest in the
Rainbow Cleaner in their local communities. The independent
Authorized Distributors with whom those dealers are affi liated assume the responsibility
for the legitimate distribution and service of the Rainbow Cleaner directly through their
own dealers, or indirectly through independent subdistributors and their dealers.
Rexair further requires that each Authorized Distributor make prompt and workmanlike
service available through its own service outlets or through responsible independent
service outlets in those commun ities in which it sells Rexair products through its
independent subdistributors and dealers.
Do not lose the name and address of the Dealer or Distributor from whom you bought
the Rainbow Cleaner. Contact him or her for advice on caring for your Rainbow,
warranty coverage, service, and the nearest service outlet.
Rexair is highly selective regarding those it appoints as its direct customers, the
Authorized Distributors. However, Rexair has no agreement or legal relationship with
the independent resellers who acquire products directly or indirectly from an Authorized
Distributor, and can only attempt to correct any customer complaints about such
resellers by acting through the responsible Authorized Distributor. Rexair’s announced
policy is to hold each Authorized Distributor responsible for remedying the results of any
statement or action by any of the independent resellers that may result in a complaint
from any member of the buying public.
Should you have any problem or have any question regarding the above, you should
fi rst contact the Distributor or Dealer from whom you purchased your
Rainbow. If you
have any problem locating that person, contact Rexair’s Customer Service Department
at the address listed below, being sure that you include your Rainbow’s Serial Number.
They will immediately send you the name, address and phone number of the responsible
Authorized Distributor for your area. If you feel you are not receiving proper assistance
from the Authorized Distributor, please contact us immediately. All of our Authorized
Distributors know their obligations.
For any additional information or assistance write to:
Rex air, 50 W. Big Bea ver Roa d, Sui te 350, Troy, Mich igan 480 84, U.S .A.
(248) 643-7222 or fax to (248) 643-7676. You can visit Rexair’s Web Site at:
www.RainbowSystem.com
Rexair provides to its Authorized Distributors, and only to them, a written four-year
warranty on its vacuum cleaner and attached accessories and an eight-year warranty
on the vacuu m cleaner mo tor and cont roller. Replacement parts can be new or
remanufactured as provided at Rexair’s sole discretion. These warranties do not cover
normal wear-and-tear arising from usage of the products. Even though Rexair, as the
manufacturer, does not deal directly with the consumer nor provide the consumer with
a written warranty, the law imposes certain responsibilities on all manufacturers who
make consumer products. The products must not be defective and must be generally
fi t for their intended uses. These implied warranties of merchantability and fi tness
are honored by Rexair. Further, Rexair requires each Authorized Distributor to pass
through to the consumer, by way of the Authorized Distributor’s own written warranty,
the benefi t of Rexair’s warranty to such Distributor.
exair sells the Rainbow to its Authorized Rainbow Distributors for resale by
those Distributors and their ag ents solely through in-home demonstrations
to ultimate user-owners. An y other sale is strictly prohibited . A ny product
purchased in any other sale is not covered by the authorized warranties.
R13737AN-0
Printed in U.S.A.
©Rexair 2007
P O W E R N O Z Z L E
Owner’s Manual
Power Nozzle
e SERIES
Please read all
instructions
carefully before
using unit.
TABLE OF
CONTENTS
Important Safety Instructions
Using Your Power Nozzle
3
Electrifi ed Hose
Replacing a Worn Belt
5
Trouble-Shooting
6
Message from Rexair / Warr
a
nty
Back
Cover
C
USTOMER CARE
NUMBER
As part of Rexair’s C
onsumer Care program, all new Rainbow Power Nozzles receive a Consumer Care Serial Number
after passing Quality Control testing at the factory. This serial number provides:
1. Ownership Identifi cation for you;
2. Warranty Identifi cation for your distributor;
3. Assurance of passing Quality Control testing;
4. Assurance of “factory-fresh” condition.
For your protection, check to see that the serial number is on the Rainbow Power Nozzle at the location shown on the
accompanying diagram. No new Rainbow Power Nozzle should be sold without this number. If the number is missing,
Rexair makes no claim as to the origin, age, or condition of the unit. If you cannot fi nd a serial number on your Rainbow
Power Nozzle, please call our customer service department at (248) 643-7222, or fax to (248) 643-7676.
For additional
informa
tion or assistance, please write to: Rexair, 50 W. Big Bea
ver Road, Suite 350, Troy, Michigan 48084 U.S.A.
For your own protection, record the serial number in the space provided below.
Save this information for future reference.
Visit Rexair’s Web Site at: www.RainbowSystem.com
Your Authorized Rainbow Distributor
(Please Print)
Name:
____________________________________________________________________________________________________________________
Address:
_______________________________________________________________________________________________________________
City/State/Zip:
______________________________________________________________________________________________________
Phone:
__________________________________________________________________________________________________________________
Dealer Signature:
_________________________________________________________________________________________________
Serial No.:
_____________________________________________________________________________________________________________
TROUBLE-
SHOOTING
This Rainbow
appliance
was
thoroughly tested
and inspec
ted at the
factory. If a minor
problem develops,
the following trouble-
shooting procedures
may help identify and
correct the
problem with a
minimum inconvenience.
If the above solutions do
not prove successful,
call your Authorized
Rainbow Distributor.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Motor
Not Running.
Handle switch not activiated.
Must squeeze actuator in
electrifi ed hose handle.
Electrical connection at
hose coupling not made.
Make positive electrical
connection at opening.
Electrical connection at
hose handle not made.
Make positive electrical
connection at hose handle.
Automatic resetting motor
protector has tripped.
Turn Rainbow off. Leave
off for two seconds. Turn
Rainbow back on.
Motor Running
But Brush
Not Revolving.
Broken belt.
Disconnect power; Remove
sole plate; Make sure brush
rotates freely; Replace belt.
Brush Stopped
(Cannot Be
Rotated
By Hand).
Object lodged in
brush chamber.
Disconnect power; Remove
sole plate; Remove foreign
object; Make sure brush
rotates freely.
Bearing worn out.
Replace brush and bearing
assembly by Distributor.
Power Nozzle
Not Picking
Up Well.
Clogged air chamber.
Disconnect power; Remove
sole plate; Clear out entire air
chamber; Sight through pivot
arm to make sure there are
no obstructions.
Clogged wands or hose.
Disconnect power; Remove
obstruction; Connect to
Rainbow; Make sure air is
fl owing freely through hose.
Bristles not in contact
with carpet.
Make sure sole plate is
completely in position before
latching; Replace brush if
bristles are worn too short.
Height adjustment not
properly set.
Set to proper height.
6
The confi guration of the
Rainbow
®
®
Cleaning System and the words
Rainbow
®
®
,
RainbowMate
®
and
Rexair
®
®
are registered trademarks of Rexair, Troy, Michigan U.S.A.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1 Close supervision is necessary when any appliance is used by or near children. Do
not allow your Rainbow to be used as a toy or to run unsupervised at any time.
2 Unplug the Rainbow when not in use. Turn it off at the master switch before
unplugging. Grasp the plug to disconnect it from the wall outlet to avoid damage
to cord, plug, prongs or receptacle. Do not pull or carry by cord, use cord as a
handle, close a door on cord, pull or carry around sharp edges or corners. Do not
run appliance over cord. Keep cord away from heated surfaces. Do not use with
damaged cord or plug.
3 Do not leave appliance when plugged in. Unplug Rainbow from outlet when
unattended and before servicing.
4 If Rainbow or Power Nozzle is in disrepair, do not attempt to operate either machine.
If the Rainbow is not working properly as it should, has been dropped, damaged,
left outdoors or dropped into water, return it to your Rainbow Distributor.
5 Do not clean the unit or unclog the hose until the Rainbow is switched off and the
plug is removed from the wall outlet.
6 Do not connect to the receptacle of an incandescent light fi xture or use any
extension cords.
7 To avoid the possibility of fi re or explosion, do not use your Power Nozzle in areas
where fl ammable and/or explosive vapor or dust is present. Some cleaning fl uids
can produce such vapors. Areas where fl ammable cleaning fl uids have been used
should be completely dry and thoroughly aired before being vacuumed. Do not
use the Rainbow or Power Nozzle to unplug drains. If sewer gas it drawn into the
Rainbow, it could cause an explosion.
8 Never touch a metal sink, cold or hot water pipe with one hand while touching the
metal parts of any electrical appliance, light fi xture or switch with the other hand.
Your body could complete an electrical circuit to the ground. Additionally, wet skin
surfaces can greatly increase this hazard. Do not handle plug or appliance with
wet hands.
9 (a) Do not put any objects into openings; Do not use with any openings blocked;
Keep free of dust, lint, hair and anything that may reduce airfl ow; (b) Keep hair,
loose clothing, fi ngers and all parts of the body from openings and moving parts; (c)
Use extra care when cleaning on stairs.
10 Type Y power cords must be replaced by an authorized Rainbow distributor. If the
cord is damaged, turn off the power switch on the Rainbow and unplug the unit.
11 Do not pick up anything that is burning or smoking, such as cigarettes, matches
or hot ashes. Do not use to pick up fl ammable or combustible liquids, such as
gasoline, or use in areas where they may be present.
12 This appliance is provided with double insulation. Use only identical replacement
parts. See instructions for Servicing of Double-Insulated appliances in Rainbow
Owner’s Manual.
13 Your Power Nozzle contains a powerful revolving brush. To avoid bodily injury,
the Power Nozzle should not be placed against or close to loose clothing, jewelry,
hair or body surfaces while cleaner is connected to electrical outlet. The Power
Nozzle does NOT protect against bodily injury or damage to objects that contact the
revolving brush.
NING:
The electrifi ed hose contains elec
tric wires
. To reduce the risk of
electric shock: Do not immerse. Do not use or repair a damaged hose. Use
only on carpet moistened by cleaning process.
15
IMPORTANT:
The electrifi ed hose contains electrical wires and should be
checked regularly. Do not use if damaged, cut
, or punctured. Avoid picking
up sharp objects. Do not use to suc
k up water. Do not imme
rse in water for
cleaning. Always turn off this appliance before connecting or disconnecting
either the hose or motorized
nozzle.
IMPORTANT
SAFETY
INSTRUCTIONS
Please read all
instructions
before using unit. Use
your Rainbow only
for its intended use
as described in the
instructions.
The use
of attachments not
recommended by Rexair
may cause hazards.
ALWAYS
FOLLOW THESE
IMPORTANT
SAFETY
INSTRUCTIONS.
SAVE THESE
INSTRUCTIONS
NOTE: Always
disconnect from electrical supply
when servicing.
Turn the Power
Nozzle upsid
e
down.
Using a fl at-bladed screwdrive
r or coin, turn the
fastener a quarter-turn to the left (counter
clockwise).
Remove the sole plate by grasping the fi nger tabs.
2
Insert Finger Under Belt Cover Near The Brush
.
Lift the belt cover to unlatch it and rotate it back towards
the wand.
3
To remove the brush ro
ll,
grasp the outermost ends
of the brush roll and lift the brush roll out of the pockets
in the nozzle housing. Remove the worn or broken belt
from the brush roll or the motor shaft.
4 Loop the new belt around the pulley in the center
of the brush roll.
Position the brush roll over the unit
so that indicator groove is nearest the spare belt pocket
and the belt is hanging from the brush roll near the
motor shaft. Position the belt around the motor shaft.
5
With the belt looped around the motor shaft and
pulley in the center of the brush roll, position the
ends of the brush roll on the rails located at the
outboard edges of the Power Nozzle.
Using both
hands, slide the brush roll on the rails towards the front
of the unit until the ends of the brush roll are fully seated
into their pockets. Spin the brush roll by hand until the
belt tracks in the center of the pulley on the b
rush roll.
6
Rotate the belt cover towards the front of the unit
and push down to snap i
t into place.
Position the sole plate over the unit.
Snap into place
edge of the sole plate into the unit and turn the fastener
a quarter-turn to the right (clockwise) until it “clicks.”
REPLACING A
WORN BELT
NOTE:
Always disconnect unit
from electrical supply
when servicing.
NOTE:
Contact your local
Rainbow distributor
fo
r
a new Power Nozzle belt.
Store the new belt in the
spare belt pocket under
the sole plate.
5
USING YOUR
POWER NOZZLE
Use the Power Nozzle
and RainbowMate for
dry pick-up only. To
avoid risk of electrical
shock, NEVER pick up
water or any other fl uids
with the Power Nozzle or
RainbowMate.
1 Switch Actuator
2 Electric Cord
3 Straight Wand
4 Cord Channel
5 Pivot Arm
6 Electrifi ed Hose
3
ASSEMBLY:
1 Push straight wand into pivot arm of the motorized powerhead unit.
2 Insert the electric cord into the long cord channel guide on straight wand by
pressing the cord into channel guide with thumb.
3 Leave a bit of slack in the lower cord at the base of the straight wand (and pivot
arm) to enable the handle to be raised and lowered.
OPERATING THE POWER NOZZLE:
Hold the Power Nozzle. Squeeze the switch
actuator and slowly guide the Power Nozzle
back and forth in smooth and easy strokes. Let
the Power Nozzle and the Rainbow Cleaner do
the work.
Adjust The Power Nozzle For Proper Height
The Power Nozzle has a three-position height
adjustment to meet virtually any carpet cleaning
need. The HEIGHT adjustment is made by
turning the three-position thumb wheel located on the top side of the Power Nozzle
to the desired
selection.
LOW:
For most carpets and rugs.
MEDIUM:
For plusher carpeting where Power Nozzle may drag.
HIGH:
For very deep pile carpeting and special applications.
2
LOCK POWER NOZZLE IN UPRIGHT POSITION:
To lock the Power Nozzle wand in the upright position,
place left foot
on top of the Power Nozzle. Grasp the
straight Power Nozzle wand and push
forward until the
wand is fully engaged in the locking tabs. To disengage
the Power Nozzle
wand, follow these same steps in the
reverse order.
HEIGHT
A
DJUSTMEN
T
5
3
6
2
CONNECTING POWER NOZZLE WAND AND
ELECTRIFIED HOSE HANDLE:
Insert the short metal
wand of the Rainbow handle on the electrifi ed hose
into the long metal wand o
f the Power Nozzle. Align
the button lock on the short wand
with the guide on the
Power Nozzle wand. Slide the button into the guide to
engage the lock. When button lock engages, connection
is secure.
SWITCH
ACTUA
TO
ING THE ELECTRICAL CONNECTION:
Holding
hose fi rmly
(do not grip Rainbow handle switch
actuator)
, plug the Power Nozzle electric cord into the
receptacle on the underside of the Rainbow handle.
3
CONNECTING ELECTRIFIED HOSE TO POWER UNIT:
Attach the elect
rifi ed hose to the front of the power unit
at the air inlet opening. Insert the coupling end into the
air inlet opening
, open the receptacle door by lifting up
with the top of the hose coupling, and press the coupling
into the machine until both latches have snapped into
place. This will complete the electrical connection to
the machine.
S
ERVICE INFORMATION: PLEASE READ VERY CAREFULLY.
The performance of your new cleaner greatly depends upon home maintenance. The
instructions given in this booklet will guide you in performing simple home maintenance.
To obtain the most satisfying years of service, read through these instructions and keep
them handy for future reference.
• Never pick up hard or sharp objects with the Rainbow. Items such as pins, hairpins,
tacks, crayons, and pencil stubs may damage the brush roll or break a belt.
• DO NOT OIL MOTOR. The motor is permanently lubricated and sealed.
• Use Power Nozzle on carpeting and/or large fl oor rugs only.
• DO NOT USE ON BARE OR HARDWOOD FLOORS.
• Use on dry surfaces only. Do not use outdoors or on wet surfaces.
4
ENERGIZING THE POWER NOZZLE
:
With the
electrical connections made, the power unit master
switch will en
ergize both the power unit and the Power
Nozzle. How
ever, the power unit will not activate the
power nozzle brush roll. The switch actuator in the
Rainbow handle must be actuated to
operate the Power
Nozzle. To remove the electrifi ed hose from the power
unit, squeeze coup
ling side latches and
pull hose from
in
take opening.
5
After the electrical connections are made, push the ON/
OFF switch on the Rainbow to the “high-speed” setting
(>>
) to operate both the Rainbow and the motorized
Power Nozzle. The sw
itch in the electrifi ed hose handle
will operate the Power Nozzle only. To remove the
electrifi
ed hose from the lower unit, squeeze coupling
side latches and pull hose from intake opening.
ELECTRIFIED
HOSE
WARNING:
The electrifi ed hose
contains electric wires.
To red
uce the risk of
electric shock: Do not
immerse. Do not use or
repair a damaged hose.
Use only on carpet
moistened
by
cleaning
process.
Loading...