POWERMOON POCKETMOON Operating Instructions Manual

Operating instructions POWERMOON® - POCKETMOON®

Rev. 1001_EN 1/18

POWERMOON GmbH
Ginsterstr. 5
47495 Rheinberg

Telefon: +49 2843 / 16699
Telefax: +49 2843 / 96516
E-Mail: [e-mail]

Internet: www.POWERMOON.de
www.pocketmoon.de

Operating instructions

Type

POWERMOON® POCKETMOON®

Operating instructions POWERMOON® - POCKETMOON®

2/18 Rev. 1001_EN

Introduction

Thank you for choosing a product from POWERMOON®. Please read through this manual
carefully before using the Pocketmoon®, and store it in a safe place so that you can refer to it later
if necessary.

Please read this first

- There may be changes to the content of these operating instructions and the included
reference material made at no notice.

- The content of these operating instructions has been checked at all stages of the
manufacturing process. However, if you should notice anything that appears questionable
or incorrect, please issue an appropriate notification.

- Duplication of the content of these operating instructions (in whole or in part) is forbidden.
Any use of the content of these operating instructions for purposes other than private use
(unless POWERMOON® has consented to it) is protected by copyright.

- POWERMOON® accepts no responsibility for any damages or lost profits suffered by you
or third parties as a result of use of this product or any defect with it.

- POWERMOON® accepts no responsibility for any damages or lost profits as a result of
malfunctions, repairs or other causes.

- Please note that the examples and illustrations shown in these operating instructions may
differ from the actual configurations of your POWERMOON® product.

Operating instructions POWERMOON® - POCKETMOON®

Rev. 1001_EN 3/18

Contents

Introduction .................................................................................................................... 2

Please read this first ...................................................................................................... 2

1.0 Identification ............................................................................................................ 4

1.1 Product name and type designation ....................................................................... 4

1.2 Product version ....................................................................................................... 4

1.3 Name and address of the manufacturer ................................................................. 4

2.0 Product description ................................................................................................. 5

2.1 General functions and scope of use ....................................................................... 5

2.2 Dimensions and weight ........................................................................................... 5

2.3 Power supply .......................................................................................................... 5

2.4 Energy consumption, energy provisions ................................................................. 6

2.5 IP-Code................................................................................................................... 6

2.6 Environmental provisions ........................................................................................ 6

2.7 Security information, summary ............................................................................... 7

3.0 Definitions ................................................................................................................ 8

3.1 Safety information in these operating instructions .................................................. 8

3.2 Operational safety ................................................................................................ ... 9

3.3 Service safety ....................................................................................................... 10

4.0 Operational instructions ....................................................................................... 11

4.1 Transportation and storage ................................................................................... 11

4.2 Security measures prior to use ............................................................................. 11

4.3 Unpacking ............................................................................................................. 11

4.4 Safe disposal of the packaging material ............................................................... 12

4.5 Preparatory work prior to installation .................................................................... 12

4.6 Tripod set up ......................................................................................................... 13

4.7 Attach light on tripod (if appropriate) ................................................................ ..... 14

4.8 Connecting the lamp ............................................................................................. 15

4.9 Adjust the height of the tripod ............................................................................... 16

4.10 Storage and protection during interruption of normal use ................................... 17

4.11 Using and charging of the Lithium Ion Battery .................................................... 17

5.0 Maintenance and cleaning .................................................................................... 18

5.1 Maintenance and cleaning by the user ................................................................. 18

5.2 Maintenance and cleaning by qualified staff ......................................................... 18

Operating instructions POWERMOON® - POCKETMOON®

4/18 Rev. 1001_EN

1.0 Identification

1.1 Product name and type designation

Product name: POWERMOON® - POCKETMOON®

1.2 Product version

Version 1.0

1.3 Name and address of the manufacturer
POWERMOON GmbH

Ginsterstr. 5
47495 Rheinberg

Telefon: +49 2843 / 16699
Telefax: +49 2843 / 96516
E-Mail: [e-mail]
Internet: www.POWERMOON.de / www.pocketmoon.de

Operating instructions POWERMOON® - POCKETMOON®

Rev. 1001_EN 5/18

2.0 Product description

2.1 General functions and scope of use

The POWERMOON® is always an ideal solution wherever a lot of good light is temporarily
needed – whether it’s road or railway construction, search and rescue operations, event lighting
or temporary lighting of a car park. The POWERMOON light is for indoor and outdoor use.

The special thing about POWERMOON® is its virtually glare-free and reduced-shadow light (no
harsh shadows). This allows for a high light output with daylight-like lighting conditions, all
without distracting glare such as you get with e.g. conventional headlights. The high­performance LED lights allow for maximum luminosity at low terminal value. As such the
POWERMOON® allows for optimal teamwork and it minimises the chance of road accidents, for
drivers of passing automobiles will not be disturbed by blinding floodlights.

2.2 Dimensions and weight

POWERMOON® POCKETMOON®
Dimensions: Diameter 420mm, Height 85mm
Weight: 500g

Transportbag
Dimensions Bag: Length 1000mm, Width 360mm, Height 100mm

2.3 Power supply

POWERMOON® POCKETMOON®
230V, 50Hz, 4,7A

Operation with power supply:
90V - 305V Input

Operation with lithium ion akku:

12V / 10Amp

Operation 12V car battery:
Attention!
Before using the car adapter, please take the time to take our short
instructions in point 4.9.2 in the user manual.

Operating instructions POWERMOON® - POCKETMOON®

6/18 Rev. 1001_EN

2.4 Energy consumption, energy provisions

2.5 IP-Code

Protection type IP68 (suitable for outside use in rain and snow)

6

(1st digit) protection type against contact and foreign bodies

- Dust tide

8

(2nd digit) protection type water protection

- Waterproof

2.6 Environmental provisions

Environmental protection

Light from POWERMOON® devices and sound (from generators) harm the environment. Please
observe regional environmental regulations during operation, as well as regulations concerning
residence and animals (wild animals, insects and birds) in woods and fields.

Safety distances

It is necessary to keep a safety distance of at least 1 metre from combustible materials e.g. dry
wood, plastics etc. (such as wood ceilings, building walls, plastic insulation, room dividers...).

The POWERMOON® device may not be used in the vicinity of flammable materials (e.g. petrol
and gas). The POWERMOON device is not suitable for use in EX zones.

When you are transporting or passing high voltage power lines with a vehicle on which a
POWERMOON device is installed, it is essential to observe the prescribed safety distances: 50
metres distance from overhead power lines, at least 2.5 metres distance from power lines over
tracks.
Get informed of the respective on-site guidelines. These can differ in some regions. This also
applies to guidelines in airports, harbours and oil refineries.

Steps must be taken to make sure that the POWERMOON® power supply won’t be damaged or
interrupted by passing traffic or drafts. Pedestrians and moving traffic cannot be hindered by
cables which could lead to accidents or injuries.

Regarding lighting within tanks, closed containers, chimneys or floating objects:
The POWERMOON® must be operated with a separate transformer if you intend to use it in tanks,

closed containers or chimneys or on floating metal pontoons or boats. An electrician should check
whether or not safe use is possible prior to commissioning. Tanks: the tanks must be located in a
non-flammable atmosphere free of flammable gases and hydrocarbons. Consistency with
standards with electrical devices on ships must be verified by an electrician prior to
commissioning; ditto for proper connection and grounding (consider separation and equalisation).
NB: With regard to floating bodies, there applies additional, regional (offshore, inland coastal area)
safety requirements for electrical devices; these should be inquired about with the responsible
personnel prior to the commissioning of a POWERMOON®.