PowerMadd 14806 User Manual

®

P

OWER

Mounting Instructions for: Yamaha S.O.S. Part No. 14806

HARDWARE INCLUDED:

Item Qty Description
1 1 Yamaha S.O.S.
2 4 #14 x ¾” Tek Hex Head Screw

Mounting Options: PowerMadd’s Yamaha S.O.S. is designed to mount to the footrest on the clutch side of all Yamaha
sleds built with the SX and Viper chassis.

Step 1: On the clutch side of the engine compartment, line up the four holes of the S.O.S. with the four holes of the

footrest.

Step 2: Install the S.O.S. using the four self tapping screws provided, making sure the screws draw tight to the

surface of the S.O.S.

Important Note: If your footrest does not have four holes, place the S.O.S on the footrest and slide it away from the
clutch and up against the bellypan. Mark and drill the four holes using a 7/32” drill bit.

POWERMADD® warrants this product to be free from defects in material and workmanship, and may elect to repair or

replace this product. This warranty does not cover any labor costs to remove or reinstall this product.
To inquire on the warranty of this product, please contact POWERMADD®.

M

ADD

LIMITED WARRANTY

Spare Oil & Storage

POWERMADD
1-800-435-6881
www.powermadd.com PP5029 REV A