Charging the headset
Insert a USB charging cable into a USB port which have support 5V power
(such as an ACIDC USB adapter or PC USB port). When the red light is on,
the headset is in charge. When the red light will be off, the headset is fully
charged. It takes about 2-2.5 hours to charge the headset fully.
The battery is rechargeable. Low-Voltage alert: When the alert tone low
battery’ sounds and the indicator turns red indicate that the battery has run
out, needs to be charged as soon as possible.First time charging: please be
sure the battery has been charged fully before use.
Wired headphone function For any mode of headphones, you can connect
one side of the 3.5 stereo sound supply extension line to the headphone
audio jack, another side connects to Audi0 Jack{such as mobile phones,
computers, Ipad, etc).1hen you will hear songs from other devices.
Precautions
1. Please be gentle when using headphones. The maximum tolerance of the
button is 250g. Excessive force or being stroked by something all will
damage buttons.
2. Please do align the USB port when plugging or pulling the USB cable in
case that damages the USB cable fails to charge the headphone
3. When encountering something similar to interference. please first delete
the Bluetooth devices that connected with headphones before, then restart
your phone, at last, please repair the Bluetooth headphone.
4. If long time without using a headset, it is recommended to turn off the
headset, in case the battery iS in a low voltage state, causing the charging
problems.
5. Please don’t put the headset in a hot temperature area.
6. Please don’t vibrate or shock the headset violently, and do not let it fall
down from a high place
⚙