POWERLINK X20CP1483, X20CP1483-1 Technical data
X20CP1483 and X20CP1483-1
X20CP1483 and X20CP1483-1
1 General information
The x86 100 MHz-compatible X20CP1483 is the entry-level X20 CPU. With an optimal price/performance ratio, it
has the same basic features as the larger CPUs and offers sufficient performance for most standard applications.
USB and Ethernet are included in every CPU. In addition, every CPU has a POWERLINK connection for real-time
communication.
In addition, a multi-purpose slot is provided for an additional interface module.
•
Intel x86 100 MHz-compatible with additional I/O processor
•
Onboard Ethernet, POWERLINK V1/V2 and USB
•
Modular expansion of interfaces
•
CompactFlash as removable application memory
•
Fanless
2 Order data - X20CP148x
Model number Short description
X20CP1483 X20 CPU, x86 100 MHz (Intel compatible), 32 MB DRAM, 128 kB SRAM, removable application
X20CP1483-1 X20 CPU, x86 100 MHz (Intel compatible), 64 MB DRAM, 128 kB SRAM, removable application
0CFCRD.0512E.01 CompactFlash 512 MB extended temp.
0CFCRD.2048E.01 CompactFlash 2048 MB extended temp.
5CFCRD.016G-06 CompactFlash 16 GB B&R (SLC)
5CFCRD.032G-06 CompactFlash 32 GB B&R (SLC)
5CFCRD.0512-06 CompactFlash 512 MB B&R (SLC)
5CFCRD.1024-06 CompactFlash 1 GB B&R (SLC)
5CFCRD.2048-06 CompactFlash 2 GB B&R (SLC)
5CFCRD.4096-06 CompactFlash 4 GB B&R (SLC)
5CFCRD.8192-06 CompactFlash 8 GB B&R (SLC)
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
X20 CPUs
memory: CompactFlash, 1 insert slot for X20 interface modules, 2 USB interfaces, 1 RS232
interface, 1 Ethernet interface 10/100BASE-T, 1 POWERLINK interface, including power supply
module, 1x terminal block X20TB12, slot cover and X20 end cover plate X20AC0SR1 (right)
included, order application memory separately!
memory: CompactFlash, 1 insert slot for X20 interface modules, 2 USB interfaces, 1 RS232
interface, 1 Ethernet interface 10/100BASE-T, 1 POWERLINK interface, including power supply
module, 1x terminal block X20TB12, slot cover and X20 end cover plate X20AC0SR1 (right)
included, order application memory separately!
Required accessories
CompactFlash cards
Optional accessories
Batteries
Table 1: X20CP1483, X20CP1483-1 - Order data
Data sheet V 2.38 1
X20CP1483 and X20CP1483-1
Included in delivery
Order number Short description
4A0006.00-000 Backup battery (see also "Battery" on page 14)
- Interface module slot covers
X20AC0SR1 X20 end cover plate (right)
X20TB12 X20 terminal block, 12-pin, 24 V coding
Table 2: X20 CPUs - Content of delivery
3 X20CP148x - Technical data
Model number X20CP1483 X20CP1483-1
Short description
Interfaces 1x RS232, 1x Ethernet, 1x POWERLINK (V1/V2), 2x USB, 1x X2X Link
System module CPU
General information
B&R ID code 0xA239 0xAEC5
Cooling Fanless
Status indicators CPU function, Ethernet, POWERLINK, CompactFlash, battery
Diagnostics
Battery Yes, using LED status indicator and software
CPU function Yes, using LED status indicator
CompactFlash Yes, using LED status indicator
Ethernet Yes, using LED status indicator
POWERLINK Yes, using LED status indicator
Temperature Yes, using software register
Support
ACOPOS support Yes
Visual Components support Yes
Power consumption without memory card, interface
module and USB
Power consumption for X2X Link power supply
Power consumption
Internal I/O 0.6 W
Additional power dissipation caused by actuators
(resistive) [W]
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
UL cULus E115267
HazLoc cCSAus 244665
DNV GL Temperature: B (0 - 55°C)
LR ENV1
KR Yes
ABS Yes
EAC Yes
KC Yes
CPU and X2X Link power supply
Input voltage 24 VDC -15% / +20%
Input current Max. 2.2 A
Fuse Integrated, cannot be replaced
Reverse polarity protection Yes
X2X Link power supply output
Nominal output power 7 W
Parallel connection Yes
Redundant operation Yes
Input I/O power supply
Input voltage 24 VDC -15% / +20%
Fuse Required line fuse: Max. 10 A, slow-blow
Output I/O power supply
Nominal output voltage 24 VDC
Permissible contact load 10 A
Power supply - General information
Status indicators Overload, operating status, module status, RS232 data transfer
1)
1)
IP20, Ta (see X20 user's manual)
Industrial control equipment
Process control equipment
Class I, Division 2, Groups ABCD, T5
Humidity: B (up to 100%)
EMC: B (bridge and open deck)
Table 3: X20CP1483, X20CP1483-1 - Technical data
6 W
1.42 W
-
FTZÚ 09 ATEX 0083X
for hazardous locations
Vibration: B (4 g)
2)
3)
2 Data sheet V 2.38
X20CP1483 and X20CP1483-1
Model number X20CP1483 X20CP1483-1
Diagnostics
RS232 data transfer Yes, using LED status indicator
Module run/error Yes, using LED status indicator and software
Overload Yes, using LED status indicator and software
Electrical isolation
I/O supply - I/O power supply No
CPU/X2X Link supply - CPU/X2X Link power
supply
Controller
CompactFlash slot 1
Real-time clock Nonvolatile, resolution 1 s, -10 to 10 ppm accuracy at 25°C
FPU Yes
Processor
Type x86 100 (compatible)
Clock frequency 100 MHz
L2 cache -
L1 cache for data and program code 16 kB
Integrated I/O processor Processes I/O data points in the background
Modular interface slots 1
Remanent variables Max. 32 kB
Shortest task class cycle time 1 ms
Typical instruction cycle time 0.09 μs
Data buffering
Battery monitoring Yes
Lithium battery At least 3 years
Standard memory
RAM 32 MB SDRAM 64 MB SDRAM
User RAM 128 kB SRAM
Interfaces
Interface IF1
Signal RS232
Variant Connection made using 12-pin terminal block X20TB12
Max. distance 900 m
Transfer rate Max. 115.2 kbit/s
Interface IF2
Signal Ethernet
Variant 1x RJ45 shielded
Cable length Max. 100 m between 2 stations (segment length)
Transfer rate 10/100 Mbit/s
Transfer
Physical layer 10BASE-T/100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Interface IF3
Fieldbus POWERLINK (V1/V2) managing or controlled node
Type Type 4
Variant 1x RJ45 shielded
Cable length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Interface IF4
Type USB 1.1
Variant Type A
Max. output current 0.5 A
Interface IF5
Type USB 1.1
Variant Type A
Max. output current 0.5 A
Interface IF6
Fieldbus X2X Link master
Electrical properties
Electrical isolation Ethernet (IF2), POWERLINK (IF3) and X2X (IF6) isolat-
ed from each other, from other interfaces and from PLC
Table 3: X20CP1483, X20CP1483-1 - Technical data
Yes
4)
5)
6)
Data sheet V 2.38 3
X20CP1483 and X20CP1483-1
Model number X20CP1483 X20CP1483-1
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order application memory (CompactFlash) separately
Dimensions
Width 150 mm
Height 99 mm
Depth 85 mm
Weight 300 g
Table 3: X20CP1483, X20CP1483-1 - Technical data
1) The specified values are maximum values. For examples of the exact calculation, see section "Mechanical and electrical configuration" in the X20 system
user's manual.
2) When operated at temperatures above 55°C, a derating of the nominal output power to 5 W for the X2X Link power supply must be taken into account.
3) In parallel operation, it is only permitted to expect 75% of the nominal power. It is important to make sure that all power supply units operated in parallel
are switched on and off at the same time.
4) The memory size for remanent variables is configurable in Automation Studio.
5) Minus the set remanent variables.
6) For additional information, see section "Communication / POWERLINK / General information / Hardware - IF/LS" in Automation Help.
Backup battery included in delivery
X20 end cover plate (right) included in delivery
12-pin X20 terminal block included in delivery
Interface module slot covers included in delivery
4 Data sheet V 2.38
4 X20 CPUs - Status LEDs
X20CP1483 and X20CP1483-1
Figure LED Color Status Description
1) The process can take several minutes depending on the configuration.
R/E
S/E Green/Red Status/Error LED. The statuses of this LED are described in section "LED "S/
DC
Green
Red
Green On CompactFlash inserted and detectedCF
Yellow On CompactFlash read/write access
Yellow On CPU power supply OK
Red On Backup battery empty
On Application running
Blinking Boot mode system start:
Double flash Mode BOOT (during firmware update)
On SERVICE mode
Blinking The "R/E" LED blinks red and the "RDY/F" LED blinks yellow when there is a
On SERVICE or BOOT modeRDY/F Yellow
Blinking The "RDY/F" LED blinks yellow and the "R/E" LED blinks red when there is a
On A link to the POWERLINK peer station has been established.PLK Green
Blinking A link to the POWERLINK peer station has been established. The LED blinks
On A link to the peer station has been established.ETH Green
Blinking A link to the peer station has been established. Indicates Ethernet activity is
CPU initializing the application, all bus systems and I/O modules
license violation.
license violation.
E" (LED "Status/Error")" on page 5.
when Ethernet activity is taking place on the bus.
taking place on the bus.
1)
1)
4.1 LED "S/E" (LED "Status/Error")
This LED is a green/red dual LED and indicates the state of the POWERLINK interface. The LED states have a
different meaning depending on the operating mode of the POWERLINK interface.
4.1.1 Ethernet mode
In this mode, the interface is operated as an Ethernet interface.
LED "S/E"
Green Red Description
On Off The interface is operated as an Ethernet interface.
Table: LED "S/E": Interface in Ethernet mode
4.1.2 POWERLINK V1 mode
LED "S/E"
Green Red Current state of the POWERLINK node
On Off The POWERLINK node is running with no errors.
Off On A system error occurred. The type of error can be read using the PLC logbook. An irreparable problem has occurred. The system
Blinking alternately The POWERLINK managing node has failed. This error code can only occur when operated as a controlled node. This means
Off Blinking System stop. The red blinking LED indicates an error code (see "System stop error codes" on page 7).
Off Off The interface is either not active or one of the following states or errors is present:
can no longer properly carry out its tasks. This state can only be changed by resetting the module.
that the set node number lies within the range 0x01 - 0xFD.
•
The device is switched off.
•
The device is in the startup phase.
•
The interface or device is not configured correctly in Automation Studio.
•
The interface or device is defective.
Table 4: LED "S/E": POWERLINK V1 mode
Data sheet V 2.38 5
Loading...