POWEREX CM450HA-5F Datasheet
CM450HA-5F
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
A
B
DE
S
R
R
P - THD.
(2 TYP.)
K
Outline Drawing and Circuit Diagram
Dimensions Inches Millimeters
A 3.82 97.0
B 3.15 80.0
C 0.69 17.5
D 1.14 29.0
E 1.04 26.5
F 1.89 48.0
G 0.63 16.0
H 0.24 6.0
J 0.26 6.7
E
G
H
J
LABEL
E
E
G
C
E
C
N - DIA.
(2 TYP.)
Dimensions Inches Millimeters
K 1.14 29.0
L 1.42 36.0
M 0.28 7.0
N 0.26 6.5
P M4 Metric M4
Q M5 Metric M5
R 0.51 13.0
S 0.35 9.0
Q - THD.
(2 TYP.)
FG
M
L
C
Trench Gate Design
Single IGBTMOD™
450 Amperes/ 250 Volts
Description:
Powerex IGBTMOD™ Modules
are designed for use in switching
applications. Each module consists
of one IGBT Transistor in a single
configuration, with a reverse
connected super-fast recover y
free-wheel diode. All components
and interconnects are isolated
from the heat sinking baseplate,
offering simplified system assembly and thermal management.
Features:
□ Low Dr ive Power
□ Low V
□ Discrete Super-Fast Recovery
□ High Frequency Operation
□ Isolated Baseplate for Easy
Applications:
□ DC Chopper
□ UPS
□ Forklift
Ordering Information:
Example: Select the complete
nine digit module part number you
desire from the table below - i.e.
CM450HA-5F is a 250V (V
450 Ampere Single IGBTMOD™
Power Module.
Type Amperes Volts (x 50)
CM 450 5
CE(sat)
Free-Wheel Diodes
(20-25 kHz)
Heat Sinking
Current Rating V
CES
CES
),
365
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
CM450HA-5F
Trench Gate Design Single IGBTMOD™
450 Amperes/250 Volts
Absolute Maximum Ratings, Tj = 25°C unless otherwise specified
Characteristics Symbol CM450HA-5F Units
Junction Temperature T
Storage Temperature T
Collector-Emitter Voltage (G-E Short) V
Gate-Emitter Voltage (C-E Short) V
Collector Current I
Peak Collector Current I
Diode Forward Current I
Diode Forward Surge Current I
Power Dissipation P
j
stg
CES
GES
C
CM
FM
FM
d
Maximum Mounting Torque, M6 Terminal Screws — 26 in-lb
Maximum Mounting Torque, M6 Mounting Screws — 26 in-lb
Maximum Mounting Torque, M4 (G, E) Terminal Screws — 13 in-lb
Module Weight (Typical) — 270 Grams
V Isolation Voltage V
RMS
-40 to 150 °C
-40 to 125 °C
250 Volts
±20 Volts
450 Amperes
900* Amperes
450 Amperes
900* Amperes
735 Watts
2500 Volts
Static Electrical Characteristics, Tj = 25°C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Collector-Cutoff Current I
Gate Leakage Current I
Gate-Emitter Threshold Voltage V
Collector-Emitter Saturation Voltage V
CES
GES
GE(th)
CE(sat)
VCE = V
VGE = V
, VGE = 0V — — 1.0 mA
CES
, VCE = 0V — — 0.5 µA
GES
IC = 45mA, VCE = 10V 3.0 4.0 5.0 Volts
IC = 450A, VGE = 10V, — 1.2 1.7 Volts
IC = 450A, VGE = 10V, Tj = 150°C — 1.1 — Volts
Total Gate Charge Q
Diode Forward Voltage V
G
FM
VCC = 50V, IC = 450A, VGS = 15V — 1760 — nC
IE = 450A, VGS = 0V — — 2.0 Volts
Dynamic Electrical Characteristics, Tj = 25°C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Input Capacitance C
Output Capacitance C
Reverse Transfer Capacitance C
Resistive Turn-on Delay Time t
d(on)
Load Rise Time t
Switching Turn-off Delay Time t
d(off)
Times Fall Time t
Diode Reverse Recovery Time t
Diode Reverse Recovery Charge Q
IES
OES
RES
r
F
rr
rr
VGE = 0V, VCE = 10V — — 6 nF
VCC = 50V, IC = 450A, — — 2700 ns
V
= V
GE1
= 10V, RG = 5.6Ω, — — 900 ns
GE2
Resistive Load — — 500 ns
IE = 450A, diE/dt = -900A/ms — — 300 ns
IE = 450A, diE/dt = -900A/ms — 7.6 — µC
— — 132 nF
— — 4.5 nF
— — 1200 ns
Thermal and Mechanical Electrical Characteristics, Tj = 25°C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Thermal Resistance, Junction to Case R
Thermal Resistance, Junction to Case R
Contact Thermal Resistance R
th(j-c)
th(j-c)
th(c-f)
Per Module, Thermal Grease Applied — — 0.090 °C/W
Per IGBT — — 0.17 °C/W
Per Free Wheel Diode — — 0.23 °C/W
366
Loading...