Powerex CM200DY-34A Data Sheet
CM200DY-34A
A
XW
FF
B
N
L
(4 PLACES)
D
M NUTS
(3 PLACES)
G
G
H
KKK
PPP
T THICK
U WIDTH
QQ
V
C
S
R
G2
E2
E1
G1
C1E2C2E1
LABEL
C2E1 E2 C1
G2
E2
E1
G1
E
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
www.pwrx.com
Dual IGBTMOD™
A-Series Module
200 Amperes/1700 Volts
Description:
Powerex IGBTMOD™ Modules
are designed for use in switching
applications. Each module
consists of two IGBT Transistors
in a half-bridge configuration with
each transistor having a reverseconnected super-fast recovery
free-wheel diode. All components
and interconnects are isolated from
the heat sinking baseplate, offering
simplified system assembly and
thermal management.
Features:
£ Low Drive Power
£ Low V
CE(sat)
£ Discrete Super-Fast Recovery
Free-Wheel Diode
£ Isolated Baseplate for Easy
Heat Sinking
Outline Drawing and Circuit Diagram
Dimensions Inches Millimeters
A 4.25 108.0
B 2.44 62.0
C 1.18+0.04/-0.02 30.0+1.0/-0.5
D 3.66±0.01 93.0±0.25
E 1.89±0.01 48.0±0.25
F 0.98 25.0
G 0.24 6.0
H 0.59 15.0
K 0.55 14.0
L 0.26 Dia. Dia. 6.5
M M6 Metric M6
Dimensions Inches Millimeters
N 1.18 30.0
P 0.71 18.0
Q 0.28 7.0
R 0.87 22.2
S 0.33 8.5
T 0.02 0.5
U 0.110 2.8
V 0.16 4.0
W 0.85 21.5
X 0.94 24.0
Applications:
£ AC Motor Control
£ UPS
£ Battery Powered Supplies
Ordering Information:
Example: Select the complete
part module number you
desire from the table below -i.e.
CM200DY-34A is a 1700V (V
CES
200 Ampere Dual IGBTMOD™
Power Module.
Type Current Rating
Amperes Volts (x 50)
CM 200 34
V
CES
),
101/10 Rev. 1
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com
CM200DY-34A
Dual IGBTMOD™ A-Series Module
200 Amperes/1700 Volts
Absolute Maximum Ratings, Tj = 25°C unless otherwise specied
Ratings Symbol CM200DY-34A Units
Junction Temperature Tj –40 to 150 °C
Storage Temperature T
Collector-Emitter Voltage (G-E Short) V
Gate-Emitter Voltage (C-E Short) V
Collector Current (DC, TC = 109°C)*4 I
Peak Collector Current (Pulse Repetition)*2 I
Emitter Current (TC = 25°C) IE*1 200 Amperes
Peak Emitter Current (Pulse Repetition)*2 I
Maximum Collector Dissipation (TC = 25°C, Tj ≤ 150°C)*2,*4 P
Mounting Torque, M5 Main Terminal — 30 in-lb
Mounting Torque, M6 Mounting — 40 in-lb
Weight — 400 Grams
Isolation Voltage (Main Terminal to Baseplate, f = 60Hz, AC 1 min.) V
–40 to 125 °C
stg
1700 Volts
CES
±20 Volts
GES
200 Amperes
C
400 Amperes
CM
*1 400 Amperes
EM
1980 Watts
C
3500 Volts
ISO
Static Electrical Characteristics, Tj = 25°C unless otherwise specied
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Collector-Cutoff Current I
Gate Leakage Current I
Gate-Emitter Threshold Voltage V
Collector-Emitter Saturation Voltage V
I
V
CES
V
GES
I
GE(th)
IC = 200A, VGE = 15V, Tj = 25°C*3 — 2.2 2.8 Volts
CE(sat)
C
= V
CE
GE
= 20mA, VCE = 10V 5.5 7.0 8.5 Volts
C
, VGE = 0V — — 1.0 mA
CES
= V
, VCE = 0V — — 2.0 µA
GES
= 200A, VGE = 15V, Tj = 125°C*3 — 2.45 — Volts
Total Gate Charge QG VCC = 1000V, IC = 200A, VGE = 15V — 1330 — nC
Emitter-Collector Voltage VEC*1 I
= 200A, VGE = 0V*3 — — 3.0 Volts
E
Dynamic Electrical Characteristics, Tj = 25°C unless otherwise specied
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Input Capacitance C
Output Capacitance C
Reverse Transfer Capacitance C
Inductive Turn-on Delay Time t
Load Rise Time tr V
Switch Turn-off Delay Time t
Time Fall Time tf Inductive Load — — 350 ns
Diode Reverse Recovery Time trr*1 Switching Operation, — — 450 ns
Diode Reverse Recovery Charge Qrr*1 I
*1 Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi).
*2 Pulse width and repetition rate should be such that device junction temperature (Tj) does not exceed T
*3 Pulse width and repetition rate should be such as to cause negligible temperature rise.
*4 Case temperature (TC), and heatsink temperature (Tf) measured point is just under the chips.
— — 49.4 nf
ies
V
oes
— — 1.06 nf
res
— — 550 ns
d(on)
V
d(off)
GE1
= 10V, VGE = 0V — — 5.6 nf
CE
= 1000V, IC = 200A, — — 190 ns
CC
= V
= 15V, RG = 2.4Ω, — — 750 ns
GE2
= 200A — 20 — µC
E
rating.
j(max)
2 01/10 Rev. 1
Loading...