Powered Aire TSD-1-48IG User Manual

POWERED AIRE INC.
www.poweredaire.com
109 Mortensen Road Phone: 724-588-3305 Greenville, PA 16125 Fax: 724-588-3371
SUGGESTED AIRE CURTAIN SPECIFICATIONS
(CSI formatted specifications available at
Aire curtains to be furnished as factory assembled units manufactured by Powered Aire Inc. Greenville, PA. Each unit consists of casing, motors, centrifugal fans, and discharge nozzle. Aire curtains will be equipped with access panels for motor and fan assembly. Individual motor and fan assembly can be removed without lowering the unit or the bottom half of the unit. Aire curtain unit to provide uniform velocity across the entire length of the discharge area.
All weight bearing structural support will be made of formed 11-gauge stainless steel and galvanized steel. Outer casing shall be constructed of 16-gauge stainless steel. Casing will be equipped with stainless steel access panels for inspection, cleaning and removal of motor blower assembly. Internal components shall be welded and bolted construction.
Units shall be equipped with dynamically balanced curved double inlet double width galvanized blower wheels with brazed hubs and matched blower housings. Fan scrolls or formed fiberglass air diverters shall not be acceptable.
Motors will be 3 horse power Total Enclosed Air Over (TEAO) 1160 RPM 50/60 cycle equipped with sealed ball bearings of equal size at each end and double extended shafts. To prevent a misalignment from occurring, no outboard bearings or flexible couplings will be acceptable. Aire curtain discharge to distribute outlet air evenly at and between blowers for the entire length of aire curtain through the use of a plenum.
Discharge nozzle shall be adjustable to + turbulence and create a pressure drop or a sound pressure increase.
Unit(s) shall be provided with a factory matched indirect gas heater. The heater will be equipped with power exhaust, direct spark ignition, electronic flame supervision, and gas pressure switches. Tubular heat exchangers shall be constructed of aluminized steel. Optional stainless steel heat exchangers are available upon request. Heater to be independently supported 2 inches away from duct transition. Duct transition will be bolted to aire curtain and will need to be supported.
Standard control panel shall be NEMA 12 enclosure with overload relays and contactors
Units shall have an 18 month warranty on all parts.
20 degrees with no dampers or grills to add
Indirect Gas Heat
Controls
October, 2013
www.poweredaire.com)
.
Control Options for Model TSD IG
Indirect Gas Heated Options
* Recommended
*Door Switch/Magnetic -- A non-mechanical door switch that turns the air curtain on when the door is
opened.
* Hand/Off/Auto Selector Switch (Panel Mounted) -- Switches between the unit running constantly in the hand position, off, and auto, which only runs when the door switch is activated.
*Heat On/Off Selector Switch (Panel Mounted) -- Turns the heat on and off while the fans are running, or when used in conjunction with a thermostat can disable the heat.
*Thermostat (Panel Mounted) -- Turns the gas heat in the unit on and off while the fans are running based on the room temperature.
Other Options
Cruise Control Programmable Switch -- Digital logic controller with an LCD display that takes the place
of several individual control components including a Built-in Time Delay Relay, On/Off/Auto Switch, and Heat On/Off Switch.
Disconnect-Fused -- A switch that will disconnect all power from the unit so that the unit can be serviced or inspected and includes fuses for circuit protection.
Disconnect-Non Fused -- A switch that will disconnect all power from the unit so that the unit can be serviced or inspected.
Door Switch/Roller-Plunger -- A mechanical door switch that turns the air curtain on when the door is opened.
Motion Detector -- Turns the air curtain on when the sensors detect motion so that the air curtain turns on before the door is opened.
On/Off Selector Switch (Panel Mounted) -- Switches the air curtain on and off.
Programmable Digital Thermostat -- A thermostat that is programmable with a digital display (7-day,
1/2 hour increments, specify up to 4 time periods per day).
Built-in Time Delay Relay -- Provides a delay for shutting off the air curtain after the door is shut. This is useful for doors that see a lot of foot traffic, so the unit is not constantly turning on and off during the day. To be used in conjunction with a door switch.
Loading...
+ 4 hidden pages