Power Dynamics 172.837PDC-08W, 172.839 PDC-08B User Manual

172.837 PDC-08W

172.839 PDC-08B

COMPUTER DJ SYSTEM

USER’S MANUAL

HANDLEIDING

GEBRAUCHSANWEISUNG

MANUAL DE INSTRUCCIONES

UK

1. WARNING SAFETY INSTRUCTIONS

1. Read this instruction manual carefully before operating unit for the first time.

2. Keep this instruction manual for reference.

3. Follow all instructions carefully.

4. Do not use this apparatus near water.

5. Clean only with a dry cloth.

6. Do not block any ventilation openings.Install in accordance with manufacturer’s
instructions.

7. Do not install near any heat sources such as radiators,registers,stoves,or other
Apparatus (including amplifiers) that produce heat.

8. Only use attachments and accessories specified by the manufacturer.

9. Use only with the cart, stand,tripod,bracket,or table specified by the
manufacturer, or sold with the apparatus.When a cart is used,use caution when
moving the cart/apparatus combination to avoid injury from tip-over.

10.Unplug this apparatus during lightning storms or when unused for long periods of
time.

11.Refer all servicing to qualified service personnel.Servicing is required when the
apparatus has been spilled or objects have fallen into the apparatus,the apparatus
has been exposed to rain or moisture,does not operate normally,or has been

dropped.

12.If rack-mounting,provide adequate ventilation.Equipment may be located above
orbelow this apparatus,but some equipment(like large power amplifiers) may cause
an unacceptable amount of hum or may generate too much heat and degrade the
performance of this apparatus.

WARNING:To reduce the risk of fire or electric shock,do not expose this apparatus
to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no
object filled with liquids, such as vases, shall be placed on the apparatus.

Installation

Check that all foam and plastic padding is removed.
Connect all cables.

Always disconnect from electric mains power supply before cleaning or
servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the
product specification voltage. The power supply is printed on the back of the device.

Features

BELOW IS A DESCRIPTION OF THE FUNCTIONS OF THE CONTROLS.

1. PLAY/PAUSE- Each time you press the PLAY/PAUSE button, the operation changes from play to

pause or from pause to play.

2. CUE- Pressing CUE returns the track to the Cue Point and pauses it. (If you haven't set a Cue Point

with the PAUSE button yet, the Cue Point will be the beginning of the track) When you are at the Cue
Point, pressing and holding CUE will start playback. When CUE is released, the track will return to the
Cue Point and the track will be paused. While you are holding down CUE, you can press PLAY then
release both buttons to allow playback to continue normally
.

3. PITCH-/+- Pressing one of these buttons will bend the pitch of the track on that deck, slightly

decreasing or increasing its speed. When you release the button, the track will return to its normal
pitch. (This is an important feature when manually aligning the beats of two tracks.)

4. JOG WHEEL- Scratches or searches through the track on that deck, depending on the JOG

WHEELS' current mode (as set by the SCRATCH/SEARCH button):

a. Scratch Mode: When the SCRATCH LED is lit, moving the JOG WHEEL "scratches" on the
track on that deck - an effect similar to moving the platter on a turntable.

b.Search Mode: When the SCRATCH LED is not lit and the deck is paused,moving the JOG
WHEEL will search through the track on that deck. If the deck is playing while in Search Mode,
moving the JOG WHEEL will bend the pitch of the track on that deck, slightly decreasing or
increasing its speed. When you release the button, the track will return to its normal pitch. (This
is an important feature when manually aligning the beats of two tracks.)

5. LOAD-Press this button to load the selected track to that deck.