Power Dynamics PDM – MP3, 171.160, 171.162, 171.164, PDM-L404MP3 User Manual

PDM – MP3 MUSIC MIXERS

(171.160 - 171.162 - 171.164)

USER’S MANUAL
HANDLEIDING
GEBRAUCHSANWEISUNG

GB

Congratulations on the purchase of this Power Dynamics music mixer.
Please read this manual carefully prior to using the unit.

Warning:

- Read the manual prior to using the unit.

- Keep the manual for future reference.

- Keep the packaging for safer transport in its original packaging

- For indoor use only.

- Prior to the first use, have the unit checked by a qualified person.

- The unit contains voltage carrying parts. DO NOT open the mixer.

- When you unplug the unit from the mains always pull the plug, never the lead.

- Never plug or unplug the unit with wet hands.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet.

- Repairs and lamp replacement has to be carried out by a qualified technician.

- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.

- Do no place the unit near heat sources.

- Always unplug the unit during a thunderstorm or when it is not in use.

- If the unit has not been used for a longer period of time, condensation can occur inside the housing. Please
let the unit reach room temperature prior to use.

- Keep out of the reach of children.

- All channel controls and the master volume control must be set to zero prior to switching the unit on.

- Set the channel slider controls slowly. Fast variation can overload the speakers.

- To prevent clipping of the amplifier do not set the volume level too high.

- Switch the amplifier on at latest and switch it off at first.

- Do not use cleaning sprays for the slider controls. The residues of these spray cause dust deposits in the
controls. If a problem occurs, please consult a specialist.

Features:

• With USB/SD player and delay effect

• 3-band EQ per channel

• +48V phantom power

• Channel inserts for mono inputs

• AUX feed from each channel

PANEL

1. XLR MIC input

2. Channel INSERT – TRS 6.3mm jack

3. LINE input 6.3mm jack

4. Channel GAIN rotary

5. PAN (L-R balance) control

6. 3-band EQ (HIGH/MID/LOW) controls

7. Channel AUX output level

8. EFF rotary – internal delay or EFFECT out

9. Channel volume fader

10. Channel PEAK LED

11. +48V phantom power switch

12. Stereo channel line input – 2 x 6.3mm jack

13. Stereo channel line input – 2 x RCA

14. REC output – record out on 2 x RCA

15. AUX output – 6.3mm jack

16. EFFECT output – 6.3mm jack (overrides Delay
effect)

17. L + R main output

18. PHONES output – stereo 6.3mm jack

19. USB/SD player transport controls

20. Power LED

21. VU and CLIP LEDs for L + R output

22. DELAY and REPEAT controls

23. PHONES output level

24. AUX output level

25. EFFECT output level

26. MAIN fader – master volume control

27. 12Vac power input (adapter supplied)

28. USB port

29. SD card slot

Specifications :

Mic input electronically balanced, discrete in out

configuration

Frequency response ............................20Hz to 20KHz

Gain range .........................................+14dB to + 60Db

SNR...........................................................120Db E.I.N

Line input .................................... electronically balanced

Frequency response ..........................20Hz to 20KHz

Gain range ................................-6Db to +38 Db

SNR ............................................95Db E.I.N

Stereo channels

Frequency response ..........................20Hz to 20KHz

Gain range line : -8 to +15Db / Mic :+13 to +60Db

SNR .........................line:96Db / mic :104Db E.I.N

QUALIZATION

LOW ................................................50Hz , +/- 15Db

MID .................................................700Hz, +/- 15Db

HI ..................................................10Khz , +/- 15db

MAIN MIX

Main outputs :+28dBu balanced / +22 dBu unbalanced

AUX Send ..................................+22dBu unbalanced

EFF Send ..................................+22dBu unbalanced

Tape out ....................................+22dBu unbalanced

Phones putput ...................................... +15dBu / 150

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or
your dealer about the way to proceed.

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior
notice.