Power Craft PSM-200 User Manual
Servotool BV • P.O. Box 30159 • 8003 CD Zwolle • NL • www.ferm.com 0507-05
GB Subject to change
UK
USERS MANUAL
Art.nr. BGM6013
PSM-200 Bench grinder
Powercraft 7
EXPLODED VIEW
BENCH GRINDER
Read this users manual carefully, before using the
machine. Make sure you understand how the
machine works, and you know how to operate it.
Maintain the machine according to the instructions, to be sure of correct functioning. Keep this users manual
and other enclosed documentation with the machine.
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig. A
1. On/off switch
2. Tool rest (Right)
3. Eye shield
4. Eye shield bracket
5. Screw
6. Tool rest (Left)
PACKAGE CONTENTS
1 Bench Grinder
2 Sets eye shield bracket + eye shield
1 Tool rest (Right)
1 Tool rest (Left)
1 Users manual
1 Guarantee card
SAFETY GUIDELINES
In this users manual the following pictograms are used:
Read instructions manual
In accordance with essential applicable safety
standards of European directives
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord gets damaged and
during maintenance
Keep bystanders away
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ATTENTION!
Whenever using electrical machines, always observe
local safety guidelines in regard to danger of fire,
electric shock hazard and risk of bodily injury. Read
the instructions below, carefully.
1. Keep your work area clean and tidy
A cluttered work area can cause accidents.
2. Be alert to the conditions in your surroundings
Never use electric tools in damp or wet surroundings, and do not leave them lying in the rain. Ensure
good lighting of the work area. Never use electric
tools in the presence of inflammable fluids or gases.
3. Prevent electric shock
Avoid bodily contact with earthed objects such as
pipes, radiators, heaters and/or refrigerators.
4. Keep children at a safe distance
While working, do not allow others to distract you,
and keep them at a safe distance so that they cannot
trip over or stand on the power cord.
5. Store your tool in a safe place
When not in use, store your tools in a dry and unexposed space, out of reach of children.
6. Do not overload the tool
You will work better and safer when you stay within
the maximum design loading.
7. Use the right tool for the job
For heavier work, do not use tools or jigs that are too
light for the job. Never force a tool to do a job for
which it was not designed.
8. Wear suitable work clothing
1
2
3
4
5
6
Voltage | 230 V~
Frequency | 50 Hz
Power rating | 200 W
Rotational speed, not loaded | 2950/min
Peripheral speed |
grinding wheel | 23 m/s
Grinding wheel dimensions | Ø150 x 20 mm
Spindle hole diameter | Ø12.7 mm
Weight | 6.85 kg
Lpa (sound pressure level) | 58.0 dB (A)
Lwa (sound power level) | 71.0 dB (A)
2 Powercraft
PARTS LIST
REF NR DESCRIPTION POWERCRAFT NR
1 RUBBER FOOT 206411
4 EYE SHIELD 206452
5 - 13 EYE SHIELD BRACKET 206151
25 TOOL REST (RIGHT) 206406
37 SWITCH 206403
39 TOOL REST (LEFT) 206405
Loading...