Power Craft PSD-480K User Manual

0303-17

UK Subject to change

UK

USERS MANUAL

Art.nr. 818105

PSD-480K

Powercraft 7

2 Powercraft

Fig. B.

Fig. C.

Fig. D.

Fig. E.

2

6

5

4

3

Fig. A.

6

5

3

1

2

4

MAINTENANCE

Make sure that the machine is not live when carrying
out maintenance work on the motor.

The Powercraft machines have been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
machine care and regular cleaning.

Cleaning

Keep the ventilation slots of the machine clean to prevent
overheating of the engine.
Regularly clean the machine housing with a soft cloth, pre­ferably after each use. Keep the ventilation slots free from
dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol, alco­hol, ammonia water, etc. These solvents may damage the
plastic parts.

Lubrication

The machine requires no additional lubrication.

Faults

Should a fault occur, please contact Helpdesk Omega
Safes 0870 - 7323023.
In the back of this manual you find an exploded view sho­wing the parts that can be ordered.

ENVIRONMENT

In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of the
packaging materials can be recycled. Take these materials
to the appropriate recycling locations.
Take your unwanted machines to your local Powercraft­dealer. Here they will be disposed of in an environmentally
safe way.

Battery cells are recyclable. Take them to your local
Powercraft-dealer or a local recycling station. The collec­ted battery packs will be recycled or disposed of in an envi­ronmentally safe way.

GUARANTEE

The guarantee conditions can be found on the separately
enclosed guarantee card.

ClEl

■

DECLARATION OF CONFORMITY

(GB)

We declare under our sole responsibility that this

product is in conformity with the following

standards or standardized documents

prEN50260-1, prEN50260-2-2,

EN55014-1, EN55014-2,
EN60335-1,EN60335-2-29,
EN61000-3-2, EN61000-3-3

in accordance with the regulations.

98/37/EEC,
73/23/EEC,

89/336/EEC

from 01-11-2002

GENEMUIDEN NL

E. Kok
Im Park 20 56690 Köln BRD
Quality department