Powercraft PHG-2000K User Manual

0304/24

UK

USERS MANUAL

Art.nr. 885708

PHG-2000K

2 Powercraft

Powercraft

7

HOT AIR GUN

TECHNICAL SPECIFICATIONS

PACKAGE CONTENTS

The package contains:
1 Hot air gun
1 Diffuser nozzle round
1 Diffuser nozzle flat
1 Claw nozzle
1 Deflector nozzle
1 Paint scraper
1 Blow moulded case
1 Instruction manual
1 Warranty card

Check the machine, loose parts and accessories for
transport damage.

CAREFULLY READ THE INSTRUCTIONS
BEFORE YOU USE THE HOT AIR GUN!

SAFETY INSTRUCTIONS

The following symbols are used throughout this manual:

Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the hot air gun.
Make sure that you know how the hot air gun functions
and how to operate it. Maintain the hot air gun in
accordance with the instructions to make sure it
functions properly. Keep this manual and the enclosed
documentation with the hot air gun.

GENERAL SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury,
including the following. Read all these instructions
before attempting to operate this product.
Retain for future refence.

1. Keep work area clear.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit.
Do not use power tools in presence of flammable liquids
or gases.

3. Guard against electric shock.

Prevent body contact with grounded surfaces (e.g.
pipes, radiators, refrigerators).

4. Keep children away.

Children should be kept away from the work area at all
times. Do not let children handle the hot air gun at any
time.

5. Store unused tools.

When not in use keep tools out of reach of children.
Store in a dry and secure location.

6. Do not force tool.

Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for
accidents.

7. Use right tool.

Do not force small tools or attachments to do the job
of heavy duty tool. Do not use a hot air gun for
purposes not intended.

8. Dress properly.

Do not wear loose clothing or jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.

9. Use safety glasses.

Also use face or dust mask if cutting operation is dusty.

10. Do not abuse cord.

Never carry tool by cord or yank it to disconnect it from
electrical socket. Keep cord from heat, oil and sharp
edges.

11. Secure work.

Use clamps or a vice to hold work. It’s safer than using
your hand and it frees both hands to operate tool.

12. Do not overreach.

Keep proper footing and balance at all times.

13. Maintain tools with care.

Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and, if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and replace
if damaged. Always use tool in conjunction with a
residual circuit breaker device. Keep handles dry, clean
and free from oil and grease.

14. Disconnect tools.

When not in use, before servicing, and when changing
accessories such as blades, bits and cutters.

15. Remove adjusting keys and wrenches.

Form the habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.

Voltage | 230 V~
Frequency | 50 Hz
Power input | 2000 W
Air flow, position 1 | 500 l/min
Air flow, position 2 | 650 l/min
Temperature, position 1: | 608 °F
Temperature, position 2: | 1076 °F
Weight | 0,62 kg

UK

English

AVAILABLE SPARE PARTS FOR PHG-2000K

REF. NR. DESCRIPTION POWERCRAFT NR.

1 ENCLOSURE (COMPLETE) 104080

2 METAL FRAME FOR ELEMENT SUPPORT 104081

3 FAN MOTOR 104082

4 HEATING ELEMENT 104083

5 SWITCH 104084

6 CAPACITOR 0,1 µF 104085

EXPLODED

VIEW