Powercraft PCC-1800K User Manual

0212-30

UK Subject to change

UK

L

GA

Landesgewerbeanstalt Bayern

Nürnberg

USERS MANUAL
Art.nr. 818903

PCC-1800K

2 Powercraft

CORDLESS DRILL 18 VOLT

TECHNICAL SPECIFICATIONS

PACKAGE CONTENTS

1 Battery, type PCCB-1800
1 Battery charger, type PCCL-1800
2 Double-sided screwing bits
1 Case
1 Instructions
1 Guarantee card

Check the machine, loose parts and accessories for
transport damage.

PRODUCT INFORMATION

Fig.A

1 On/off switch
2 Speed switch
3 Torque dial
4 Drill chuck
5 Battery
6 Forward / reverse switch

SAFETY INSTRUCTIONS

The following symbols are used in these instructions for
use:

Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.

ELECTRICAL SAFETY

Always check that the power supply corresponds to the
voltage on the rating plate. Also check that your mains

voltage corresponds to the input voltage of the battery charger.

The battery charger is double insulated in accordance
with EN 60335; therefore no earth wire is required.

Replacing cables or plugs

Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm2. When using a cable reel always unwind
the reel completely.

GENERAL SAFETY INSTRUCTIONS

Warning! When using electric tools, basic safety pre­cautions should always be followed to reduce the
risk of fire, electric shock and personal injury, inclu­ding the following. Read all these instructions before
attempting to operate this product.
Retain for future refence.

1. Keep work area clean

Cluttered areas and benches invite injuries.

2. Consider work area environment

Don’t expose power tools to rain. Don’t use power
tools in damp or wet locations. Keep work area well
lit. Don’t use power tools in presence of flammable
liquids or gases.

3. Guard against electric shock

Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigerators).

4. Keep children away

Do not let visitors contact tool or extension cord. All
visitors should be kept away from work area.

5. Store idle tools

When not is use, tools should be stored in dry, high,
or locked-up place, out of reach of children.

2

3

4

6

1

5

Voltage | 18 V—--­Voltage of battery charger | 230 V~
Frequency of battery charger | 50 Hz
Battery performance | 1.3 Ah
Charging time | 1 hr
Number of drilling speeds | 2
No load speed | 0-400 / 0-1150
Torque | 20 Nm
Drill chuck jaw | 0.8 - 10 mm
Weight (incl. battery) | 1.8 kg
Lpa (noise burden) | < 75 dB(A)
Vibration value | < 2.5 m/s2

Powercraft 7

EXPLODED VIEW

SPARE PARTS LIST PCC-1800

POWERCRAFT NR. DESCRIPTION REF NR

406654 SWITCH 003
818883 PCCB-1800 BATTERY 004
406470 CHUCK (10 MM) 010
406403 LEFT BOLT (CHUCK) 011
406653 MOTOR 033
406656 LEFT/RIGHT SWITCH 037
406655 CHARGER PCCL-1800