Power Computing Power 100, Power 120 User Manual
Power 100/120 User
Guide
Sections on Hard Disk ToolKit
and
CD-ROM ToolKit are Missing. :-(
Information on these products can be found
in the
Storage Device Training Module.
Part number 72771
Rev. number 951006
Power Computing Corporation
1995 Power Computing Corporation. All rights reserved.
Under copyright laws, this manual may not be copied, in whole or in part, without the written consent of
Power Computing. Your rights to the software are governed by the accompanying software license
agreement.
Power Computing Corporation
10261 Bubb Road
Cupertino, CA 95014
(408) 725-7250
Power Computing is a trademark of Power Computing Corporation. Mac and the Mac OS logo are
trademarks of Apple Computer, Inc. All other trademarks mentioned are the property of their respective
holders. Every effort has been made in this book to distinguish proprietary trademarks from descriptive
terms by following the capitalization style used by the manufacturer.
Every effort has been made to ensure that the information in this manual is accurate. Power Computing
is not responsible for printing or clerical errors.
Other legal notices are found in
Manual Revision 951006
ÒRegulatory InformationÓ on page 65
Support Numbers
Please use the following numbers to contact Power Computing for assistance: (All times are Central
Standard Time.)
Sales
Customer
Support
To place or check on an
order you havenÕt
received yet
If you have a question or
a problem with an order
you have received
M Ð F 8AM to10 PM
Sat 9 AM to 6 PM
Sun 10 AM to 6 PM
M Ð F 8 AM to 6 PM 1-800-671-6227
1-800-999-7279
Technical
Support
For help with a technical
problem
M Ð F 8 AM to 8 PM
Sat 10 AM to 4 PM
1-800-708-6227
Contents
Power 100/120 User Guide
Power 100/120 Overview ix
Desktop System Front View ix
Desktop System Rear View x
Tower System Front View xi
Tower System Rear View xii
A word from the Power Computing team xiii
Apple Computer, Inc. System Software License Agreement xv
Chapter 1
Getting Started
Finding a place for the computer and monitor 1
Plugging in the computer 2
Connecting the monitor 4
Connecting the mouse and keyboard 6
Turning the computer on 8
Chapter 2
Getting Started With Mac OS
Running the Basics tutorial 9
Using on-line help 10
Shutting down 11
Chapter 3
Upgrading Your Computer
Removing the cover 13
Installing expansion cards 17
Switching video ports 20
Increasing memory 21
Increasing VRAM 27
Installing internal drives 28
Power 100/120 User Guide
iii
Chapter 4
Connecting Peripheral Devices
Using SCSI devices 41
Connecting a printer 43
Connecting input devices 44
Connecting a modem or telecom adapter 45
Connecting to a network 45
Using audio equipment 46
Appendix A
Safety and Health Information
Safety instructions 49
Health-related information about computer use 49
Appendix B
Troubleshooting
Restarting the computer 51
Problems and solutions 52
Contacting Technical Support 55
Appendix C
Installing System Software
Starting up 57
Reinstalling system software 58
Appendix D
Technical Information
SpeciÞcations 59
RAM conÞgurations 61
VRAM conÞgurations 62
Power requirements 63
Appendix E
Regulatory Information
FCC statement 65
DOC statement 66
CD-ROM drive 67
Lithium battery warning 67
For use in European countries 67
iv
Power 100/120 User Guide
Hard Disk ToolKit¥
Personal Edition
User Guide
Hard Disk ToolKit¥Personal Edition End-User
Software License Agreement 71
Hard Disk ToolKit¥Personal Edition 73
Copyright Notice 73
Trademarks 73
Disclaimer of Liability and Warranty 73
Introduction 75
Welcome to Hard Disk ToolKit¥
System Requirements 75
What Is Hard Disk ToolKit¥
Installing Hard Disk ToolKit¥
Installing Hard Disk ToolKit¥Personal Edition 79
Check your hard disk to double-check the Installation process (optional) 83
Creating an HDT Primer PE Startup diskette 85
Creating a Startup Disk 85
Personalizing your copy of Hard Disk Toolkit¥Personal Edition 87
Personal Edition 75
Personal Edition
? 75
Personal Edition 79
HDT Primer PE 89
What is HDT Primer PE? 89
The HDT Driver 90
Using HDT Primer PE 91
Launching HDT Primer PE 92
Formatting 94
Initializing 97
Partitioning 99
Testing a Drive 106
Information Capabilities 107
HDT Primer PE Menu Commands 110
Apple Menu 110
File Menu 110
Edit Menu 111
SCSI Bus menu 112
HDT Extension 113
What is HDT Extension? 113
Important information regarding HDT Extension 113
HDT Extension 114
Power 100/120 User Guide
v
HDT Prober 115
Using HDT Prober 116
Drive Information 118
Mounting a Drive 118
Device Driver Installed 118
HDT Prober Õpower user Õ keys: 119
HDT Util 121
HDT Util: for System 6 users only 121
The HDT Util menu commands 121
Troubleshooting 125
Common problems by category 125
ToolKit Operation Problems 125
Happy Mac Problems 126
Sad Mac 126
Drive Problems 127
Removable Media 129
File-Oriented Problems 129
System Bomb 130
Turning off Blind transfers 131
Frequently asked questions 132
CD-ROM ToolKit User Guide
Introduction 149
Before You Begin 149
What is CD-ROM? 150
Why CD-ROM ToolKit? 150
Registration 151
Hardware and Software Requirements 151
Removing Old Driver Software 152
QuickStart 154
Basic Installation 154
Personalizing CD-ROM ToolKit 157
Installation and Removal Specifics 158
Installing CD-ROM ToolKit 158
Removing CD-ROM ToolKit 160
Instruction Guide 162
The CD-ROM ToolKit Control Panel 162
Reading Different CD-ROM Formats 170
Photo CD discs 171
Prescanning CDs for Acceleration 173
Playing Audio Discs with CDT Remote 174
Using CDT Remote 175
vi
Power 100/120 User Guide
Troubleshooting 179
CD-ROM ToolKit Q & A 179
Technical Information and Tips 192
Care of Manual Ejecting CD-ROM Drives 192
CD Recorders 192
All About Multisession Multi-Volume CD-ROMs 193
All about Digital Audio Extraction 196
What is an AIFF Þle? 200
Glossary 205
Bitstream Typeface Library 211
Index 215
Registration Cards 223
Power 100/120 User Guide
vii
viii
Power 100/120 User Guide
Power 100/120 Overview
Desktop System Front View
Here are the key features of the desktop system front panel.
Monitor
Computer
0
Front panel
power button
ProgrammerÕs
(Interrupt) button
Reset
button
Keyboard
Floppy
disk
drive
Keyboard
power
key
Mouse
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
ix
Desktop System Rear View
Here are the key components of the desktop system rear panel.
g SCSI port - Sound out port G Ethernet portX Sound in port
Optional highperformance
video card with
Main power
switch
115/230 volt
switch
Power cord
socket
DRAM video
monitor port
(Mac-standard)
Macintosh-
I
0
standard monitor
port and
VGA port
[ Printer port V ADB port W Modem port NuBus expansion
slots
x
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
Tower System Front View
Here are the key features of the tower system front panel.
Computer
Floppy
disk
drive
Front
panel
power
button
ProgrammerÕs(I
nterrupt) button
Reset
button
Keyboard
Monitor
Keyboard
power
key
Mouse
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
xi
Tower System Rear View
Here are the key components of the tower system rear panel.
115/230 volt
switch
Power cord
socket
[ Printer
port
V ADB port
W Modem port
NuBus
expansion
slots
Optional highperformance
video card with
I
0
Main power
switch
DRAM video
monitor port (Mac
standard)
g SCSI port
- Sound out port
X Sound in port
G Ethernet port
VGA port and Macintosh-standard monitor port
xii
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
A word from the Power
Computing team
Dear New Power Computer Owner,
Thank you for choosing this Mac OS compatible computer from Power Computing Corporation. We
appreciate your support. As the new kids on the block, so to speak, weÕve got something to prove. We
think that Ñ dollar for dollar and pound for pound Ñ Power Computing builds the best Mac OS
compatible computers in the world. So thank you for giving us this opportunity to prove it to you.
Unlike some companies, we want to hear from you. Really. Give us a call anytime (or send us e-mail at
suggestionbox@powercc.com
LeVitus, the popular author, columnist, and industry pundit; he wants to hear what you have to say about
our products (heÕs at extension 3213 or send him e-mail at
Even if you donÕt call us, a Power Computing Corporation representative will be contacting
next few days to make sure that everything is working to your satisfaction. In the meantime, donÕt
hesitate to let us know if there is anything else we can do for you. And please, if thereÕs something we
could have done better, let us know that, too! Our company charter is to exceed your expectations in
every way. Nothing less will do.
); no question is too big or small. Our Director of Evangelism is Bob
levitus@powercc.com
).
you
in the
0
Enjoy your new Power Computer.
Sincerely,
The Power Computing Team
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
xiii
xiv
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
Apple Computer, Inc. System Software License Agreement
PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY USING
THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.
IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE, PROMPTLY RETURN THE UNUSED SOFTWARE TO THE PLACE WHERE YOU OBTAINED IT AND YOUR MONEY WILL BE
REFUNDED.
0
1. License.
The application, demonstration, system and other software accompanying this License,
whether on disk, in read only memory, or on any other media (the ÒApple SoftwareÓ), the related documentation and fonts are licensed to you by Apple. You own the disk on which the Apple Software and
fonts are recorded but Apple and/or Apple's Licensor(s) retain title to the Apple Software, related documentation and fonts. This License allows you to use the Apple Software and fonts on a single Apple computer and make one copy of the Apple Software and fonts in machine-readable form for backup purposes
only. You must reproduce on such copy the Apple copyright notice and any other proprietary legends
that were on the original copy of the Apple Software and fonts. You may use the Apple Software in a
networked environment so long as each computer in such environment is the subject of a license for the
Apple Software; however, you many not electronically transmit the Apple Software from one computer
to another over a network. You may also transfer all your license rights in the Apple Software and fonts,
the backup copy of the Apple Software and fonts, the related documentation and a copy of this License
to another party, provided the other party reads and agrees to accept the terms and conditions of this License.
2. Restrictions.
The Apple Software contains copyrighted material, trade secrets and other proprietary
material and in order to protect them you may not decompile, reverse engineer, disassemble or otherwise
reduce the Apple Software to a human-perceivable form. You may not modify, network, rent, lease,
loan, distribute or create derivative works based upon the Apple Software in whole or in part, except for
the limited networking described above in Section 1. THIS APPLE SOFTWARE MAY NOT BE IMPORTED TO, USED IN, OR RE-EXPORTED FROM FRANCE OR ANY OF ITS COLONIES OR
TERRITORIES.
3. Termination.
This License is effective until terminated. You may terminate this License at any time
by destroying the Apple Software, related documentation and fonts and all copies thereof. This License
will terminate immediately without notice from Apple if you fail to comply with any provision of this
License. Upon termination you must destroy the Apple Software, related documentation and fonts and
all copies thereof.
4. Export Law Assurances.
You agree and certify that neither the Apple Software nor any other technical data received from Apple, nor the direct product thereof, will be exported outside the United States
except as authorized and as permitted by the laws and regulations of the United States. If the Apple Software has been rightfully obtained by you outside of the United States, you agree that you will not reexport the Apple Software nor any other technical data received from Apple, nor the direct product thereof, except as permitted by the laws and regulations of the United States and the laws and regulations of
the jurisdiction in which you obtained the Apple Software.
5. Government End Users.
For Technical Support, Call 1-800-708-6227
If you are acquiring the Apple Software and fonts on behalf of any unit or
Power 100/120 User Guide
xv
agency of the United States Government, the following provisions apply. The Government agrees:
(i) if the Apple Software and fonts are supplied to the Department of Defense (DoD), the Apple
Software and fonts are classified as ÒCommercial Computer SoftwareÓ and the Government is acquiring
only Òrestricted rightsÓ in the Apple Software, its documentation and fonts as that term is defined in
Clause 252.227-7013(c)(1) of the DFARS; and
(ii) if the Apple Software and fonts are supplied to any unit or agency of the United States Government other than DoD, the Government's rights in the Apple Software, its documentation and fonts will
be as defined in Clause 52.227-19(c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-86(d)
of the NASA Supplement to the FAR.
6. Limited Warranty on Media.
Apple warrants the diskettes and/or compact disc on which the Apple
Software and fonts are recorded to be free from defects in materials and workmanship under normal use
for a period of ninety (90) days from the date of purchase as evidenced by a copy of the receipt. Apple's
entire liability and your exclusive remedy will be replacement of the diskettes and/or compact disc not
meeting Apple's limited warranty and which is returned to Apple or an Apple authorized representative
with a copy of the receipt. Apple will have no responsibility to replace a disk/disc damaged by accident,
abuse or misapplication. ANY IMPLIED WARRANTIES ON THE DISKETTES AND/OR COMPACT DISC, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO NINETY (90) DAYS
FROM THE DATE OF DELIVERY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY BY JURISDICTION.
7. Disclaimer of Warranty on Apple Software.
You expressly acknowledge and agree that use of the
Apple Software and fonts is at your sole risk. The Apple Software, related documentation and fonts are
provided ÒAS ISÓ and without warranty of any kind and Apple and Apple's Licensor(s) (for the purposes
of provisions 7 and 8, Apple and Apple's Licensor(s) shall be collectively referred to as ÒAppleÓ) EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. APPLE DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE APPLE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE APPLE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR
THAT DEFECTS IN THE APPLE SOFTWARE AND THE FONTS WILL BE CORRECTED. FURTHERMORE, APPLE DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE APPLE SOFTWARE AND FONTS OR
RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. WITHOUT PREJUDICE TO THE GENERALITY OF THE FOREGOING, APPLE DOES NOT WARRANT OR MAKE ANY REPRESENTATION OR GUARANTEE
REGARDING THE AUTHENTICITY OR SECURITY OF ANY DIGITAL SIGNATURE GENERATED USING THE APPLE SOFTWARE, OR ANY WARRANTY OR REPRESENTATION THAT THE
PERSON OR ENTITY THAT IS USING SUCH A DIGITAL SIGNATURE HAS THE AUTHORITY
TO DO SO. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY APPLE OR AN
APPLE AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE APPLE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT APPLE OR AN APPLE AUTHORIZED REPRESENTATIVE) ASSUME
xvi
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE
ABOVE EXCLUSION MAY NOT APPLY TO YOU.
8. Limitation of Liability.
UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL
APPLE BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
THAT RESULT FROM THE USE, INCLUDING BUT NOT LIMITED TO THE IMPROPER,
WRONGFUL, OR FRAUDULENT USE OF THE DIGITAL SIGNATURES GENERATED USING
THE APPLE SOFTWARE, OR INABILITY TO USE THE APPLE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF APPLE OR AN APPLE AUTHORIZED REPRESENTATIVE HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
In no event shall Apple's total liability to you for all damages, losses, and causes of action (whether in
contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Apple Software
and fonts.
9. Controlling Law and Severability.
This License shall be governed by and construed in accordance
with the laws of the United States and the State of California, as applied to agreements entered into and
to be performed entirely within California between California residents. If for any reason a court of competent jurisdiction finds any provision of this License, or portion thereof, to be unenforceable, that provision of the License shall be enforced to the maximum extent permissible so as to effect the intent of the
parties, and the remainder of this License shall continue in full force and effect.
10. Complete Agreement.
This License constitutes the entire agreement between the parties with respect to the use of the Apple Software, related documentation and fonts, and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No
amendment to or modification of this License will be binding unless in writing and signed by a duly authorized representative of Apple.
Note:
For Technical Support, Call 1-800-708-6227
The Apple Software Registration Card is in the back of the manual.
Power 100/120 User Guide
xvii
xviii
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
Chapter
1
Your computer has been designed for easy plug-and-play setup in four simple steps - if you are in need of
technical assistance, please feel free to call Power Computing Technical Support at 1-800-708-6227.
Getting Started
1
Note:
system.
■
■
■
■
This manual covers both desktop and tower systems, so look for the illustration that Þts your
Find a place for the computer and monitor
Plug in the computer
Connect the monitor
Connect the mouse and keyboard
Finding a place for the computer and monitor
Think carefully about where you place your computer and monitor. Here are some suggestions to help
you Þnd a good place:
■
Make sure there is a grounded, three-hole electrical outlet within a few feet.
■
Use a sturdy, level table or desk as a work surface. Make sure that you can place your monitor,
keyboard, and mouse so that you can work comfortably. See
Information,Ó on page 49
■
You can place monitors up to 132 lb. (60 kg) on top of the desktop computer. If you have a heavier
monitor or a tower system, place the monitor directly on your work surface.
for detailed instructions.
Appendix A, ÒSafety and Health
■
Leave a few inches of space around the computer and monitor for air to circulate.
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
1
Getting Started
Plugging in the computer
Set up and plug in the computer before connecting the monitor, keyboard, and other devices. Plugging
in the computer ensures that it is grounded and protected from electrical damage. The key components
for plugging in the computer are shown below.
Main
power switch
115/230 volt
switch
Power cord
socket
Power cord
I
0
115/230 volt
switch
Power cord
socket
Power cord
I
0
Main power switch
2
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
Getting Started
WARNING!
For your safety, the computer is equipped with a three-prong plug
designed to be used with a grounded electrical outlet. If you do not have
access to an appropriate outlet, have an electrician install one. Do not use
your computer with a three-prong adapter in an ungrounded outlet.
To plug in the computer:
1.
Place the computer in the location you have chosen.
2.
Make sure the computerÕs main power switch is turned off.
The main power switch is located on the back of the computer. The power is off when the side of the
switch marked with is depressed.
3.
Set the 115/230 volt switch to the correct setting for your country.
Set the switch to 115 volts for the U.S., Canada, and Japan. Use the 230-volt setting in most European
countries.
4.
Connect the socket end of the power cord to the power plug on the back of
the computer.
5.
Plug the other end of the power cord into a grounded, three-hole electrical
outlet. If you have any expansion cards, follow the instructions in See
ÒInstalling expansion cardsÓ on page 17. to install them now. If not,
continue with the following section.
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
3
Getting Started
Connecting the monitor
Your computer can be used with a wide variety of monitors. It has one built-in standard monitor port,
with two additional monitor ports on the optional high-performance video card. The key components
for connecting the monitor are shown below.
DRAM video monitor port
(Mac-standard)
Optional highperformance
video card with
I
0
Macintoshstandard monitor
port and
VGA port
I
0
DRAM video
monitor port (Macstandard)
Optional highperformance
video card with
4
Power 100/120 User Guide
VGA port and Macintosh-standard monitor port
For Technical Support, Call 1-800-708-6227
Getting Started
■
The DRAM video monitor port lets you connect 16-inch and smaller monitors and display thousands
of colors. This port requires Macintosh-style connectors or adapters.
■
The Macintosh-standard monitor port on the optional high-performance video card lets you connect
monitors of up to 21 inches in size and display millions of colors (depending on the amount of video
memory installed). This port requires Macintosh-style connectors or adapters.
■
The VGA monitor port on the optional high-performance video card allows you to connect a
standard VGA or SVGA monitor and use PC-style connectors.
See Appendix D, ÒTechnical InformationÓ for additional details on RAM conÞgurations, screen size
support and numbers of colors supported. You can add additional video memory ( VRAM) to increase the
number of colors available to monitors connected to the high-performance ports. See
memoryÓ on page 21
The high-performance ports are located on the high-performance video card in the computer. A switch
on the card enables the port you want. When the computer comes from the factory, the Macintosh
standard port is enabled. If this is the Þrst time the computer has been set up and you want to connect to
the Macintosh standard port, you do not need to make any changes. If you want to connect to the VGA
port on the high-performance video card, you must change the switch setting. See
portsÓ on page 20
for information about VRAM expansion.
for instructions.
ÒIncreasing
ÒSwitching video
You can connect two monitors at once, one to the standard monitor port and another to one of the highperformance monitor ports, however you cannot connect two monitors to the high-performance video
card. Use the Monitors control panel in Mac OS to control how the monitors are conÞgured. See
Macintosh Guide (available through the Guide menu, marked with ) or
Dummies
Connecting the monitor involves two steps: plugging in the monitor and connecting the monitor cable.
for additional information about using the Monitors control panel.
Macintosh System 7.5 for
To plug in the monitor:
1.
Place the monitor on your desk or in another location you have chosen.
2.
If necessary, connect the power cord to the monitor.
Some monitors have permanently attached power cords.
3.
Plug the monitor power cord into a grounded, three-hole outlet.
To connect the video cable:
1.
If necessary, attach the video cable to the monitor.
Some video cables are permanently attached.
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
5
Getting Started
2.
Connect the video cable to the monitor port on the back of the computer.
Depending on which type of monitor you use, connect it to one of the high-performance ports or to
the standard port. See
If you are connecting to a high-performance port, make sure that the correct port is enabled. See
ÒSwitching video portsÓ on page 20
3.
If you your computer is a Power 120, install the EMI choke on the video
cable.
The EMI choke is a small donut-shaped object which comes packed in the pizza box with the
manuals and cables.
To install the choke, open it up and clamp it over the video cable at the end of the cable that
connects to the computer.
ÒMonitor resolution/color tablesÓ on page 62
for instructions.
Connecting the mouse and keyboard
Once you have connected the monitor, you can connect the mouse and keyboard.
for more information.
To connect the mouse and keyboard:
1.
Plug the mouse cable into an ADB port (marked with V
The location of the ADB port depends on the keyboard you use.
) on the keyboard.
6
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
2.
Plug the keyboard cable into the ADB port (marked with V
the computer.
I
0
ADB port
Keyboard
cable
Getting Started
) on the back of
ADB port
Keyboard
cable
I
0
For Technical Support, Call 1-800-708-6227
Power 100/120 User Guide
7
Getting Started
Turning the computer on
When the computer, monitor, keyboard, and mouse are connected, you can turn the computer on.
To turn the computer on:
1.
Turn on the monitor.
See the documentation that came with the monitor for the location of the power switch.
2.
Turn on the main power switch on the back of the computer.
The power is on when the side of the switch marked with is depressed. After the Þrst time you
turn on the computer, you normally will not need to use the power switch, because you will use the
keyboard, front-panel and on-screen Shut Down switches. Boy can you ever turn this sucker on and
off!
3.
Turn the computer on by pressing the Power key (marked with a triangle)
on the upper right corner of the keyboard or the Power On button on the
front of the computer.
When the computer Þnishes its start-up procedure, you should see the Mac OS desktop. If you see a
blinking question mark, you need to install the system software on your hard disk. See
Appendix C, ÒInstalling System Software,Ó on page 57
not already described, see the section following this one,
When you need to shut your computer down, follow the instructions in
Problems starting up
If you see a blank screen when you start up, check the following items to identify the source of the
problem:
■
Are the computer and monitor plugged in? If they are plugged into a power strip, is it turned on?
■
Are the computer and monitor turned on? The power light on the front of the computer should be
on. Most monitors also have power lights.
■
Is the video cable securely connected to the monitor and computer? (If you need to reattach the
cable, Þrst turn off the computer and monitor.)
■
Are the keyboard and mouse properly connected to the computer? (If you need to reconnect them,
Þrst turn off the computer to avoid damage.)
■
Is the brightness control on the monitor turned too far down? Check the documentation that came
with your monitor for instructions.
If you see a blank screen or anything
ÒProblems starting up.Ó
ÒShutting downÓ on page 11
.
8
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
Getting Started With
Mac OS
Chapter
2
Your computer uses the Mac OS operating system, which offers a unique combination of
power and ease of use. This chapter offers very basic instructions about how to use the builtin learning features of Mac OS. It also explains how to shut down your computer properly.
For more detailed information about the Mac OS, refer to
Dummies
Running the Basics tutorial
Mac OS includes a tutorial program called MacªOS Tutorial that shows you how to use the
fundamental features of the software. If you are brand new to Mac OS, we suggest you
complete the tutorial before you begin working with your computer.
In Mac OS, you use the mouse for tasks such as choosing menu commands or starting
programs. When you move the mouse, the
sometimes referred to as the
mouse pointer over an icon and clicking twice quickly (
folder or launch a program.
.
cursor
) moves in the same direction. By placing the tip of the
mouse pointer
Macintosh System 7.5 For
(the small arrow on the screen,
double-clicking
), you can open a
2
To run the Basics program:
1.
In the Mac OS desktop, double-click the icon that represents your hard disk
(located in the upper-right corner of the screen). Be careful to place the
mouse pointer over the icon, not on the words below.
The hard disk icon Òopens,Ó displaying a ÒwindowÓ containing the Þles and folders
stored on the hard disk.
2.
Double-click the folder called MacªOS Tutorial.
The folder opens, displaying the
3.
Double-click the MacªOS Tutorial Part 1 icon.
The program starts up, displaying an introductory screen.
4.
Follow the on-screen instructions to complete the tutorial.
For Technical Support, Call 1-800-708-6227
MacªOS Tutorial Par t 1
Power 100/120 User Guide
icon.
9
Getting Started With Mac OS
Using on-line help
Mac OS (and many applications that run under it) include an on-line help system with
information about using the software. The help system for Mac OS is called Macintosh
Guide and is available through the Guide menu (marked with ).
To use Macintosh Guide
1.
Choose Finder from the Application menu (in the upper-right corner of the
desktop) to make it the active application.
2.
Choose Macintosh Guide from the Guide menu (marked with ) or
xx
press xx
The Macintosh Guide window appears.
-?.
3.
Follow the on-screen instructions to get the information you need.
10
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
Loading...