Powercases JP12000, JP21000 User Manual

USER MANUAL

Thank you for choosing the Jump Starter 12K/21K by Powercases. Always follow basic safety precautions when using electrical appliances. Before operating your new device, please read this user’s manual carefully. Please keep this instruction manual for easy reference.

Portable Power Solutions

TABLE OF CONTENTS

A. DIAGRAM 3

B. USAGE INSTRUCTIONS

1. Current-charge capacity

2. Charging

3. Jump start your vehicle

4. Jump start your vehicle (Easy steps)

6. Charging mobile phones and tablets

9. Charging laptops

8. Emergency light function

7. Torch(Flashlight) function

E.PARTS LIST

D.TECHNICAL SPECIFICATIONS 10

C. FAQ

F. SAFETY WARNINGS

G. PRODUCT WARRANTY

H. CONTACT INFORMATION

5. Smart extension cable

A. JUMP STARTER DIAGRAM

1 ON/OFF switch

2 15V/1A Input

3 5V/2.1A USB Output

4 Function button

6 LCD Display

5 12/16/19V Output

7 Jump Start socket 8 Torch(Flashlight)

9 Emergency light

(available only on JumpStarter 21K)

Smart jumper

cable

10d Negative (-) clamp

10c Positive (+) clamp

10a Smart connector 10b Polarity indicator light

1. Plug the 12 AC adapter into

the wall socket.

2. Connect the round end of the

12 AC adapter to the 2 15V/1A Input port of the

Jump Starter.

Slide the 1 ON/OFF switch to On position to turn on the power, the current-charge level will be displayed in percents on 6 LCD Display. When charging, the percentage shown on 6 LCD Display will slowly increase in time up to 100. When charging is complete, 6 LCD Display will show 100%.

B. USAGE INSTRUCTIONS

2. Charging the Jump Starter

1. Check the current-charge capacity of the Jump Starter

1. Plug the 13 Car adapter into

the cigarette lighter socket in your car/truck/boat.

2. Connect the round end of the

13 Car adapter to the 2 15V/1A Input port of the

Jump Starter.

Smart extension

cable

11d Negative (-) lug

11c Positive (+) lug

11a Smart connector

11b Polarity indicator light

USB Adapter cable

Car adapter

AC adapter

Laptop connectors

3. Jump starting a vehicle

Make sure that the current-charge capacity of the Jump Starter is not less than 30%. The Jump Starter is intended to be used with 12V automotive or marine batteries.

1. Connect clamps to battery

Connect the 10c Positive (+) clamp of the 10 Smart jumper cable to the vehicle’s positive (+) battery terminal and connect the 10d Negative (-) clamp of the 10 Smart jumper cable to the vehicle’s negative (-) battery ter- minal.

2. Connect cable to Jump Starter

Plug the 10a Smart connector end of the 10 Smart jumper cable into the 7 Jump start socket. a) If you have correctly attached the 10 Smart jumper cable, the 10b Polarity indicator light will be solid green.Please proceed to step 3. b) If you have accidentally reversed the connection of the cable clamps, the

10 Smart jumper cables will sound an audible alarm (beep) and the 10b Polarity indicator light will be solid red. Please return to step 1 and

corect the polarity of the 10 Smart jumper cable clamps.

c) If you have not securely connected the clamps to your vehicle’s battery

terminals, the 10b Polarity indicator light will flash red and green. Please return to step 1 to ensure secure connection of the 10 Smart jumper cable clamps.

3. Start your engine Now attempt to start the engine. a) If the engine starts, proceed to step 4. b) If engine does not start, wait 10 seconds before attempting to start the engine again.

c) Do not continue to attempt jump starting if the vehicle will not start

after 5 attempts. In this instance, have the vehicle serviced by a mechanic as the problem is likely beyond a discharged battery.

4. Disconnect cable from Jump Starter Once the engine has been successfully started, then disconnect the 10a Smart connector from the Jump Starter. a) If your engine is still running after disconnecting the Jump Starter,

and you are aware of the reason why your main battery was drained, drive your vehicle as normal and your alternator should recharge your main battery. On the other hand, if you are unaware as to the reason your main battery lost it’s charge, please drive your vehicle directly home or to a service station. Proceed to step 5.

b) If your engine stops running immediately after removing the 10 Smart

jumper cable, it is likely that your main battery is no longer able to hold a charge, or that you do not have a properly functioning alternator. In this instance, you may use the Jump Starter as a temporary replacement for your main battery. Leave the Jump Starter connected to your main battery, and drive your vehicle directly home or to a service station. Depending on the size of the vehicle and the electrics in use, you can expect to drive over 60 miles (100 KM) with a fully charged Jump Starter.

5. Disconnect clamps from battery First disconnect the 10d Negative (-) clamp and then finally the 10c Positive (+) clamp from battery terminals.

Please be aware that the Jump Starter is not intended to be used as a permanent replacement for your main battery. Lastly please note that your vehicle's alternator will not recharge the Jump Starter.

5. Smart extension cable

The new 11 Smart extension cable makes jump starting super easy even if your vehicle’s battery is located in an area that is difficult to acces. The 11 Smart extension cable is a 1 meter (3 foot) long cable which can be hard-wired to the battery terminals for ease of acces.

1. Examine the engine compartment firewall and locate a suitable wire loom opening large enough for the 11 Smart extension cable to pass through.

2. Feed the 11 Smart extension cable through the firewall, from the

engine compartiment and connect the eyelets (lugs) to the battery terminals.

3. Locate the 11a Smart connector in an accesible place for your

convenience (i.e. glove box, luggage compartment).

Connect to

battery

Connect to

Jump Starter

Start your

engine

Disconnect from

Jump Starter

Disconnect from

battery

2 3 4 5

4. Easy steps to jump start your vehicle.

6. Charging mobile phones and tablets

1. Make sure the electronic device is 5V powered.

2. Connect the 14 USB adapter cable to the 3 5V/2.1A USB Output port on the Jump Starter.

3. Attach the compatible charging adapter to the electronic device.

4. Slide the 1 ON/OFF switch to the On position to start charging.

7. Torch (Flashlight) function

1. Slide the 1 ON/OFF switch to the On position.

2. Press and hold 4 Function button for 3 seconds to turn on the 8 Torch(Flashlight). Press and hold again for 3 seconds to turn off.

3. Press 4 Function button once for flashing mode.

4. Press 4 Function button once again for SOS mode.

5. Press 4 Function button one more time to turn off

8 Torch(Flashlight).

8. Emergency light function

(feature only available on JumpStarter 21k)

1. Slide the 1 ON/OFF switch to the On position.

2. Double-press 4 Function button to turn on

9 Emergency light.

Double press again to turn off.

9. Charging laptops

1. Slide the 1 ON/OFF switch to the On position.

2. Press 4 Function button repeatedly to cycle through the power

output options; your selection will appear on the

6 LCD Display

Select either 12V, 16V, or 19V according to your laptop model.

3. Use the appropriate

15 Laptop connector to connect your laptop to

the Jump Starter’s 5 12/16/19V Output

port

Q. How many times can the Jump Starter charge a mobile phone? A. It depends on the size and current charge level of your mobile

phone. However for example, it can fully charge an iPhone approximately three times.

Q. How many times can the Jump Starter on a full charge start my vehicle? A. This depends greatly on the temperature and the size of the engine being started. However, for example a small car can be started 20 times, and a motorcycle 50 times.

Q. How long will the Jump Starter hold it’s charge without use? A. The Jump Starter will lose approximately 10% of it’s charge every

month, we recommend recharging the unit every 6 months.

Q. Will reversing polarity connections of the jump starter cable damage the vehicle? A. No, the Jump starter is very safe as it is equiped with a 10 Smart jumper

cable that will prevent applying the wrong polarity to your vehicles battery. If you have accidentally connected the red and black cable clamps to the wrong polarity terminals, the 10 Smart jumper cable will sound an audible alarm (beep) and the indicator light will be solid red. Simply correct the connection of the jumper cable clamps polarity.

Q. What if it doesn’t jump start the vehicle? A. Check that the clamps are well-connected to the battery terminals.

If the vehicle does not start, remove the clamps, clean the terminals, reconnect, and try again.

C. FAQ

D.TECHNICAL SPECIFICATIONS

Jump Starter Speciﬁcaons

12K 21K

Features

Emergency Jump Starng

Yes

On-Oﬀ Switch

Yes

Jump Start Seng

Automatic

USB Ports

Laptop Port

Yes

Hazzard Lights

Yes

Inverter

Vent/Cooling Fan

Flashlight(Torch)

Yes Yes

Built-in Charger

No No

Digital Readout

Yes Yes

Charge Indicator

Digital Digital

% of Charge Indicator

Yes Yes

Volt Meter for Internal Baery

Digital Digital

Battery

Type

Lithium Iron Phosphate ("LFP", LiFePO4)

Size

12,000 mAh 21,000 mAh

True (Usable) Capacity

12,000 mAh 21,000 mAh

Energy

0.144 kWh 0.252 kWh

Volts

12 V 12/24 V

Lifeme

1000+ cycles 1000+ cycles

Workiing Temperature

-20C to 60C -20C to 60C

Charge Hold Time (to 50%)

6 Months 6 Months

Jump Starter Performance

Cranking Amps (CA)

600 A 750 A

Cold Cranking Amps (CCA)

560 A 600 A

Starng Current

400 A 500 A

Peak Current

600 A 750 A

Alternator Voltage

Specs Specs

Power output (12 V)

7.2 kW (6.7 kW cold) 9 kW (7.2 kW cold)

Power output (24 V)

N/A 18 kW (14.4 kW cold)

Largest Engine Starng Capability

Gasoline (Petrol)

6.0 L (200 HP) 7.2 L (600 HP)

Diesel

3.0 L (160 HP) 4.0 L (400 HP)

Typical Applicaon

Large Cars and Small Trucks/Vans

Class 6 Trucks and Mid-size Construction/Industrial Equipment

Charging Outputs

USB 1

5 V, 1 A 5 V, 1 A

USB 2

5 V, 2.1 A 5 V, 2.1 A

4 in 1 USB cable

Yes Yes

Laptop

16/19V, 3.5 A 16/19V, 3.5 A

Latop Adapter cable

Yes Yes

Charging

Input

15 V, 1 A 15 V, 1 A

Time from full discharge

3.5 Hours 4.5 Hours

AC Charger

90 to 250 V 90 to 250 V

Car Charger

12 V 12 V

Cables

12 Volt Smart Aligator Clamps

12 inches, 8 AWG, Audible reverse polarity warning, Overheating protection

12 Volt Smart Extension Cables

3 feet, 8 AWG, Audible reverse polarity warning, Overheating protection

Inverter

Outlet

N/A N/A

Physical Enclosure

Material

Painted Rubber, HDPE Painted Rubber, HDPE

Size (L x W x H)

18 x 9 x 4 cm

Weight

420 g 573 g

Waterproof

No No

Packaging

Soft Zip Case Soft Zip Case

E.PARTS LIST

# Parts name

Jump Starter

4 in 1 USB cable

AC adaptor

Car adaptor

Extension cable

Jumper cable

User manual

Soft zip-case

QTY # Parts name QTY

F. SAFETY WARNINGS

1. If the product appears abnormal in shape, immediately stop usage and disconnect all electronic devices.

2. Keep the product away from children at all times. The product is NOT a toy for children to play with.

3. Use only the supplied AC adapter and DC adapter to charge the product.

4. Charge only at ambiental temperatures between -30° C and 60° C

5. Do not store in locations where the temperature may exceed 70°C

6. Do not operate the appliance in explosive atmospheres, such as in presence of flammable liquids, gases or dust.

7. Do not allow the appliance to become wet.

8. Do not modify or disassamble the Jump Starter. Only authorized parties may repair this unit.

9. At the end of it’s useful life, discard the appliance with due care for our enviroment.

Failure to obey the safety warnings may result in electrical fire, electrical shock and damage to your vehicle.

9 Laptop connectors / cable

G. PRODUCT WARRANTY

We offer a limited warranty for this product against any defects in material and workmanship for a period of 12 months from the date of consumer purchase. The conditions of the warranty are as follows:

1. The warranty is only valid upon presentation of the original receipt (from dealer/retailer) by the original purchaser with the product to be repaired or replaced.

2. The warranty is void if the serial number, date of purchase and label has been removed or tampered with.

3. The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification or repairs by unauthorized third parties.

4. We do not assume responsibility for any loss or damage incurred during shipment or as a result of a force majeure.

5. We are not liable for any incidental or consequential damages arising from the use or misuse of this product.

6. AII warranty claims are limited to repair or replacement of the defective product and is at our sole discretion.

7. lf we repair or replace the product, the product will be covered for the remaining time of the original warranty period. Repair or replacement may involve the use of reconditioned units which are equivalent in function. Replaced part or product becomes our property.

H. CONTACT INFORMATION

info@powercases.com

Electronic version of this user manual is available at

www.powercases.com/manuals/jp1221000.pdf

Powercases JP12000, JP21000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual