Page 1
Page 2
1. Instruction
Familiarize yourself with the features and functions of the transformer by
studying the two diagrams below:
Front of the converter
Rear of the converter
Note: When using multiple items please make sure that the combined total
wattage does not exceed the capacity of the transformer.
Page 3
2. Connect the electrical appliances to the transformer
Check the wattage requirement of your equipment and make sure it does
not exceed the transformer's maximum capacity. Then check the voltage
your equipment operates on. Select the correct input voltage according to
the country's voltage before plugging into wall outlet. When selecting input
200V-220V-240V, use the 110V outlet ONLY in the front to step down the
voltage. When selecting 110V use the 220V outlet ONLY in the front to
step up the voltage.
Make sure all the appliances and the transformer are switched "OFF".
3. Connect the transformer to the outlet
Switch the input selection switch in the back of the transformer to your wall
outlet's voltage. For example, select 110V when using in the U.S. and
select 220V when using in Europe. If plug adapter is needed for the
country you are in, connect to the cord of the transformer first. Plug in the
transformer's cord to the outlet.
4. Switch "ON" the transformer
Press the ON/OFF switch in the front of the transformer to "ON" position
and LED light will illuminate. Now, switch on your appliances one at a time
if connecting multiple items.
CAUTION: Avoid overloading
Do not overload the transformer more than its maximum capacity. Some
appliances surge when they are initially turned on thus requiring more
than the stated wattage. Such appliances included are TV, Printers and
other products with built-in motor. In these cases use at least twice the
size of the transformer than required wattage. When using multiple
appliances with a single transformer please make that the combined
Page 4
required wattage of the appliances is less than the transformer's capacity.
Do not use the transformer if the power cord is damaged or torn.
Damaged power cord must be replaced by authorized dealers or a
qualified electrician.
Storage
- Store in a well ventilated area
- Do not expose to direct sunlight or heat sources
- Keep out of reach of children
- Keep away from water, moisture, grease or oil
- Keep away from any flammable substance
Fuse
If the fuse burns while the transformer is on and the connected appliances
are "ON", you have exceed the maximum allowable current for this
transformer. You will need to reduce the amount of power being
consumed at a time or consider using a larger transformer for the given
application. Turn off the unit and unplug from wall outlet. Replace the fuse
with same amperage as one specified and transformer should be
functional.
Model: VC100W VC200W VC300W VC500W VC750W
Max.
Output
100W
200W
300W
500W
750W
Power:
Protection
Fuse Fuse Fuse Fuse Fuse
Type:
FuseRating 1A 2A 3A 5A 8A
Remarks: This model is single phase.
_________________________________________________________
Toll Free: 1-866-295-6775 | www.PowerBright.com | Printed in China
Loading...