PowerBass S-402, S-352, S-275CH, S-652, S-65T Application Manual

AUTOSOUND S SERIES SPEAKERS

Application Guide

Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass

Autosound speakers ever require service, you will need to have the original dated receipt.

S-402
S-352

S-275CH

S-652

S-65T

S-522
S-462

S-693
S-682
S-410
S-675

Thank you and Congratulation

Congratulations on your purchase of Powerbass Autosound speakers. You now own a speaker of uncom-

promising design and engineering from a factory that truly believes in the relentless pursuit of perfection.

Incorporating the highest quality parts and state-of-the-art materials, these speakers display the ultimate

balance between high fidelity, extreme performance and long-lasting reliability.

At Powerbass USA, Inc. we are confident you will have many years of outstanding enjoyment from your su-

perior SPEAKER investment. For maximum performance we recommend that you have your new PowerBass

Autosound speakers installed by an Authorized PowerBass Dealer.

To learn more about PowerBass, please visit us on the World Wide Web at

http://www.powerbassusa.com

∆ Caution ∆
Continuous exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss. PowerBass Autosound Speakers are capable
of producing sound pressure levels well over 170 dB. Please observe all local sound ordinances while listening to your PowerBass Autosound
system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to the result of use or misuse of this product.

POWERBASS AUTOSOUND S SPEAKER FEATURES

2-Layer Black Paper, DDC Finish Cone: The choice of cone materials has everything to do with the differ­ence between good and great sound. Paper delivers one of the warmest sounds available along with the DDC
(Dynamic Damping Coating) finish to give your music uncompromised fidelity.

Balanced Pure Silk, Soft Dome Tweeter: Silk dome tweeters have been used for many years by audiophile’s
world wide for the most accurate and smooth high frequency sound reproduction available. The low profile
tweeter design makes upgrading factory speakers a simple and non-evasive task. (The S-693 utilizes a mylar
Mid and Tweeter and S-275CH is full range)

OEM Drop-in Replacement: Designed to fit most OEM speaker applications for an easy installation upgrade
over factory speakers. Fits behind factory grills in many cars.

Double Pressed Treated Rolled Foamed Surround: The high damping, double rolled foam surround on
these speakers ensure linear travel throughout the entire frequency range resulting in more bass output and
higher efficiency while reducing distortion.

Additional Features: Acoustically transparent speaker grills*professional mounting hardware and speaker
wires adds further value to your investment.

SPECIFICATIONS FOR POWERBASS S SERIES SPEAKERS

(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)

Model Size Nominal

Impedance

Frequency

Response

Sensitivity

1W/1M

Magnet Size Mounting

Depth

Power RMS/

Peak

S-275CH* 2.75" 4-ohm 150Hz-19kHz 90dB 3 oz. 1.25" 30W/60W

S-352* 3.5" 4-ohm 80Hz-20kHz 85dB 4 oz. 1.5" 30W/90W

S-402 4" 4-ohm 70Hz-20kHz 86dB 6 oz. 1.8" 35W/105W

S-462* 4x6" 4-ohm 70Hz-20kHz 86dB 6 oz. 1.95" 35W/105W

S-522 5.25" 4-ohm 65Hz-20kHz 87dB 8 oz. 2.0" 40W/120W

S-65T 6.5" thin 4-ohm 63Hz-20kHz 87dB 10 oz. 2.15" 45W/135W

S-652 6.5" 4-ohm 60Hz-20kHz 88dB 10 oz. 2.3" 50W/150W

S-675* 6.75" 4-ohm 63Hz-20kHz 87dB 10 oz. 2.15" 50W/150W

S-412 4x10" 4-ohm 58Hz-20kHz 89dB 10 oz. 2.6" 50W/150W

S-682* 6x8” 4-ohm 56Hz-20kHz 88dB 10 oz. 2.35" 60W/180W

S-693* 6x9" 4-ohm 45Hz-20kHz 90dB 20 oz. 3.3" 70W/210W

*Grills Not Included on some Models.

3