PowerBass S-50C, S-60C Application Manual

AUTOSOUND S SERIES COMPONENT

Application Guide

Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass

Autosound speaker components ever require service, you will need to have the original dated receipt.

S-50C
S-60C

Thank you and Congratulations

Congratulations on your purchase of Powerbass Autosound speakers. You now own a speaker of uncompromising

design and engineering from a factory that truly believes in the relentless pursuit of perfection. Incorporating the

highest quality parts and state-of-the-art materials, these speakers display the ultimate balance between

high fidelity, performance and long-lasting reliability.

At PowerBass USA, Inc. we are confident you will have many years of outstanding enjoyment from this

great Component Speaker investment. For maximum performance we recommend that you have your new

PowerBass Autosound product installed by an Authorized PowerBass Autosound Dealer.

To learn more about PowerBass, please visit us on the World Wide Web at

http://www.powerbassusa.com

∆ Warning ∆
Continuous exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss. PowerBass Autosound Speakers
are capable of producing sound pressure levels well over 170 dB. Please observe all local sound ordinances while listening to your
PowerBass Autosound system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to the
result of use or misuse of this product.

POWERBASS AUTOSOUND S-Series

COMPONENT FEATURES

Stamped Steel Treated: These rigid baskets are designed to give the moving parts of the speaker the solid,

corrosion free platform that they need to perform for even the most discriminating listener.

Proprietary 2-layer paper, DDC (Dynamic Damping Coating) cone: The choice of cone materials has

everything to do with the difference between good and great sound. Paper delivers one of the warmest sounds

available along with the DDC finish to give your music uncompromised fidelity.

Double Pressed Treated Rolled Foamed Surround: The high damping, double rolled foam surround on

these speakers ensure linear travel throughout the entire frequency range resulting in more bass output and

higher efficiency while reducing distortion.

Balanced Pure Silk Soft Dome Tweeter: These hand treated silk dome tweeters incorporate a neodymium

motor structure and edge wound ribbon wire voice coil to provide a wide bandwidth.

High Power, Multi-Layer ASV Voice Coil: Aluminum is a high temperature voice coil former that is light

weight and designed for greater efficiency and increased power handling that gives you that loud and clear

sound that you are listening for.

Crossover Network: The included 12 dB crossover networks were designed specifically for our speakers

to recreate the frequencies within a precise range ensuring the tweeter does not receive low bass notes

and the mid bass driver does not receive high frequencies.

Tweeter Mounting Kit: Flush, surface and angle-mounting cups allows multiple mounting options for

custom tailored high frequency dispersion.

Additional Features: Acoustically transparent speaker grills, professional mounting hardware and speaker wiring

add further value to your speaker investment.

3

SPECIFICATIONS FOR POWERBASS S COMPONENTS

(Due to Constant Improvements, Specifi cations and Parameters are subject to change without notice.)

Model # Size Nominal

Impedance

Frequency

Response

Sensitivity

1W/1M

Magnet Size Mounting

Depth

Power RMS/

Peak

S-50C 5.25” 4-ohm 65Hz - 20kHz 89 dB 8 oz. 2.0” 50W/150W

S-60C 6.5” 4-ohm 60Hz - 20kHz 90 dB 10 oz. 2.3” 70W/210W

Before beginning your installation, thoroughly read this guide and keep it as a reference. It
will give you tips on proper placement, wiring, and installation as well as how to obtain the
best sound from the PowerBass speakers you have selected.

INSTALLATION EXPERIENCE

Installation of PowerBass Autosound Speakers requires experience with a variety of mechanical and elec-

trical procedures. This manual only provides general installation and operation instructions. If you have any

reservations about your installation skills or lack of the proper tools, please contact your local PowerBass

Autosound dealer for assistance.

S-SERIES COMPONENT SILK TWEETER SPECIFICATIONS

DOME

SIZE

MOUNTING

(DIAMETER)

NOMINAL

IMPEDANCE

FREQUENCY

RESPONE

SENSITIVITY

(1M / 1M)

MOUNTING

(DEPTH)

POWER

(RMS/PEAK)

3/4” SILK 1 7/8” 4Ω 3K-20Khz 91 dB 7/8” 45/90

Crossover Network

Tweeter

Woofer