Powerbass PS-WB12, PS-WB10 User Manual

PS-WB10
PS-WB12

Dual Subwoofer Bass Reflex System

Application Guide

®

®

Thank you and Congratulations

Congratulations on your purchase of a PowerBass Bass Reflex speaker system. You now
own a speaker of uncompromising design and engineering from a factory that truly
believes in the relentless pursuit of perfection. Incorporating the highest quality parts
and state-of-the-art materials, these speakers display the ultimate balance between high
fidelity, extreme performance and long-lasting reliability.

At PowerBass USA, Inc. we are confident you will have many years of outstanding
enjoyment from your superior SPEAKER investment. For maximum performance we
recommend that you have your new PowerBass Autosound speakers installed by an
Authorized PowerBass Dealer.

To learn more about PowerBass, please visit us on the World Wide Web at

http://www.powerbassusa.com

Continuous exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss.
PowerBass Autosound Speakers are capable of producing sound pressure levels well over 170 dB. Please
observe all local sound ordinances while listening to your PowerBass Autosound system. PowerBass USA, Inc.
accepts no liability for hearing loss, bodily injury, or property damage due to the result of use or misuse of this
product.

∆ Warn in g ∆

1

POWERBASS AUTOSOUND LOADED ENCLOSURE FEATURES

m

Heavy-duty Box Design: The enclosure is constructed from non-resonant 5/8” panels
that have been glued, stapled and sealed. Each box is finished in a stylish two tone RFG
aviation grade vinyl covering.

Bass Reflex Dual Port System: Utilizing a Bass Reflex design offers increased
efficiency at low frequencies. To accomplish this, a pair of flared Venturi port tubes are
used for exact tuning and virtually zero port noise (breathing) resulting in clean tight
bass.

2-layer Black Ribbed Paper, DDC Finish Cone: The choice of cone materials has
everything to do with the difference between good and great sound. Paper delivers one
of the warmest sounds available along with the DDC (Dynamic Damping Coating)
finish to give your music uncompromised fidelity.

BASV High Temperature Voice Coil: These specially designed resin coated high
temperature voice coils measure a full 2-inches in diameter to ensure high power
handling and precise linear excursion while maximizing thermal heat dissipation.

Double Pressed And Treated Foam Surround: The high damping, double rolled foam
surround on these speakers ensure linear travel throughout the entire frequency range
resulting in more bass output and higher efficiency while reducing distortion.

Double Bass Circuitry: Both woofers are internally wired in-phase resulting in the need
for just a single 4-ohm spring loaded speaker input.

Computer Optimized Acoustic Chamber: Perfectly tuned for the car environment.
This box is optimized for a tight and accurate bass response.

SPECIFICATIONS FOR “PS” SERIES SPEAKER SYSTEM

(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)

System

Model # Size
PS-WB10 Dual 10” 4-oh
PS-WB12 Dual 12" 4-ohm 30Hz - 120Hz 98 dB 40 oz. x 2 2.0" 550W/1,100W

Impedance

Frequency

Response

33Hz - 150Hz 96 dB 40 oz. x 2 2.0" 500W/1,000W

Sensitivity

1W/1M

Magnet

Size

Voice

Coil Dia.

Power

RMS/Peak

2