PowerBass AEQ-7X0 Owner's Manual And Installation Manual

AEQ-7X0 4-band graphic equalizer

with subwoofer output and CD/RADIO selector switch

Owner's Manual And Installation Guide

FEATURES

This equalizerwill be able to control 4-frequency response levels separately and in this

way obtain a personal interpretation of your favourite sound. The subwoofer output is

an additional convenience when you wish to add subwoofers to your audio systemto

greatly enrichthebass sound.

It will performwithanyunit operatingina 12volt negativegroundelectrical system.

• Using bipolar power supply

• Master volume control

• Input sensitivity control

• Subwoofer output and frequency selectors

• CD/RADIOinput selectors

• Auto sensing

- 1 -

MECHANICAL INSTALLATION

1. Select the desired location to mount unit under the dash board.

2. Drill (4) 4.2 m/mdiameter holes. Fix the mounting bracket under dash or hump with (4)
4 x 15 m/mtapping screw. Be careful when drilling so as not to damage existing wiring
under the dash board.

3. Mount unit to the mounting bracket with (4) 3 x 10 m/mmachine screw.

3.0ø WASHER

3.0ø SPRING WASHER
M3.0x10 MACHINE SCREW

4.0ø WASHER

4.0ø SPRING WASHER

M4.0x15 TAPPING SCREW

-2-

346521

60

SUB VOL SUB FREQ. BASS MID-BASS MID HI FADER SOURCE VOLUME

43

1. SUBWOOFER VOLUME
This control adjusts output level of subwoofer.

2. SUBWOOFER FREQ.
This switch select subwoofer frequency
43 or 60 Hz with LEDindicator.

3. EQUALIZER CONTROLS
Control the frequency response of the
Booster or cut, with the four tone controls
each Bass, Mid-Bass, Mid, Hi.1

-3-

CD
RADIO

4. FADER CONTROL
This control adjusts the volume between
the front and rear speakers in 4 speaker system.

5. INPUT SELECTOR SWITCH
This switch select the RADIOinput or CD
input with LEDindicator.

6. VOLUME CONTROL
This control adjusts the output level