Power Acoustik PD-344, PD-344T, PD-344B, PD-344BT Owner's Manual

PD-344/PD-344T
PD-344B/PD-344BT

Flip-down/Detachable 3.4” Monitor
DVD/CD/MP3/MP4 Player
AM/FM Radio
Built-in TV tuner(only for PD-344T /PD-344BTmodel)
Support Bluetooth(only forPD-344B /PD-344BTmodel)

Owner’s Manual

Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.

2

Important Safeguards

z Using the device at temperature below -10 may cause the breakage of the device. ℃

BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE

RECOMMENDED TEMPERATURE!

z Read carefully through this manual to familiarize you with this high-quality sound

system.

z Disconnect the vehicle's negative battery terminal while mounting and connecting the

unit.

z When replacing the fuse, be sure to use one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause serious damage to the unit.

z DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are

dangerous to the eyes.

z Make sure that pins or other foreign objects do not get inside the unit; they may cause

malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

z If you have parked the car for a long time in hot or cold weather, wait until the

temperature in the car becomes normal before operating the unit.

z DO NOT open covers and do not repair yourself. Consult the dealer or an experienced

technician for help.

z Make sure you disconnect the power supply and aerial if you will not use the system for

a long period or during a thunderstorm.

z Make sure you disconnect the power supply if the system appears to be working

incorrectly, (For example: making unusual sounds, smelling strange, emitting smokes

from inside or liquid having gotten inside it） Have a qualified technician check the

system.

z The unit is designed for negative terminal of the battery, which is connected to the

vehicle metal. Please confirm it before installation.

z Do not allow the speaker wires to be shorted together when the unit is switched on.

Otherwise it may overload or burn out the power amplifier.

z Do not install the detachable panel before connecting the wire.

z Don't remove the detachable panel when encoding.

3

Contenents

Important Safeguards...............................................................................................................2

Contenents...............................................................................................................................3

Accessories..............................................................................................................................4

Installation/Un-Installation ........................................................................................................5

Wiring Connections..................................................................................................................6

Front panel...............................................................................................................................7

Inner panel ...............................................................................................................................7

Remote control.........................................................................................................................8

Remove battery........................................................................................................................8

Main Menu ...............................................................................................................................9

General Operation ...................................................................................................................9

Radio operation......................................................................................................................13

DVD/USB/SD/MMC Operation...............................................................................................14

TV Operations(Only for PD-344T /PD-344BTmodel) .............................................................17

Bluetooth Section(Only for PD-344B/PD-344BTmodel) .........................................................18

Anti-theft system ....................................................................................................................20

Handling & Cleaning DISC.....................................................................................................20

Troubleshooting guide ...........................................................................................................21

Specification...........................................................................................................................22

4

Accessories

Package contains the following accessories for installation and operation of the unit.

(1) Washer, Spring

Washer, M5 Nut

1 each

(2) Mounting Strap 1

(3) Bolt 5*20 1

(4) Screw 5*6 4

(5) Mounting Collar 1

(6) Release Key 2

(7) Screw 5*20 1

(8) Rubber Cushion 1

ISO cable

Remote Control Warranty card

User Manual Trim ring

Note:
Product image may vary from the actual delivery.

1x front panel protection case

5

Installation/Un-Installation

First complete the electrical connections, and then check them for correctness.

Installation

This unit can be installed in any
dashboard having an opening as
shown on the picture. The
dashboard should be 4.75 – 5.56
mm thick in order to be able to
support the unit.

1. Insert mounting collar into the
dashboard, and bend the
mounting tabs out with a
screwdriver.
Make sure that lock lever（※）is
flush with the mounting collar (not
projecting outward).

2. Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber
cushion.

3. Insert trim plate.
When you prepare to insert trim plate, please check its direction. Once it was up side down, it
cannot be fixed.

Un-installation

Remove Trim Ring and insert Release Keys into left and
right side-end holes as shown in below picture and pull
the unit out of the dashboard.

Lock lever（※）

6

Wiring Connections

Make sure you have good chassis ground. A good ground connection will eliminate most
electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s
metal chassis. The area around the ground connection should be clean, bare metal without rust,
paint, plastic, dust, or dirt for a good electrical connection.

Caution: Do not interchange

the connection of the wiring!!!
For some car models you may
need to modify wiring of the
supplied power cord. Contact
your authorized car dealer
before installing this unit.

Using the ISO Connector

1. If your car is equipped with
the ISO connector, then
connect the ISO connectors
as illustrated.

2. For connections without the
ISO connectors, check the
wiring in the vehicle carefully
before connecting, incorrect
connection may cause
serious damage to this unit.

3. Cut the connector; connect
the colored leads of the power
cord to the car battery as
shown in the color code table
below for speaker and power
cable connections.

Location Function

Connector A Connector B
1 Rear Right(+)---Purple
2 Camera (12V DC)--Pink Rear Right(-)---Purple/Black Stripe
3 Parking (GND)--Brown Front Right(+)---Grey
4 Battery 12V (+)--Yellow Front Right(-)---Grey/Black Stripe
5 Auto Antenna--Blue Front Left(+)---White
6 Front Left(-)---White/Black Stripe
7 ACC(+)--Red Rear Left(+)---Green
8 Ground--Black Rear Left(-)---Green/Black Stripe

7

Front panel

1） Power /Mute button
2） Mode button
3） Volume/OK button
4） BAND / Media select button
5） SEL button
6） Previous / Reverse button
7） EQ /LOUD button
8） Next / Forward button

9） MENU button
10） AS/PS button
11） Play/Pause, Memory button
12） LCD Screen
13） IR sensor
14） OPEN button
15） USB slot
16） AV IN jack

Inner panel

17） SD/MMC card slot
18） Eject button
19） Disc loading slot
20） Reset button (hole)
21） Anti-Theft LED flash

NOTE：When turn off the power, the unit will switch to standby mode unless cut the ACC power.

The power light will continue lighting.