
深圳市倾玄科技有限公司 官方网址:http://www.pourxuan.com 联系电话:0755-36520843
PX-HD100-WIFI USER MANUAL
HDMI Wireless Extender
This Wireless Video Solution enables wireless transmission of video/audio from
any HDMI video source such as PC/HDTV to display devices includes HDTV/HD
Monitor over the 2.4GHz/5GHz band, with very low latency.
It does not require any special configuration of software driver
installation-simply connect the transmitter to the HDMI output of the video source
and the receiver to the HDMI input of the Panel/TV/Monitor. Its Plug & Play operation
makes it the ultimate solution for the most demanding indoor/outdoor professional
environments.
This Wireless HD Video Transmission Solution is widely applicable to family
entertainments, office presentation, lecture, education, medical treatment, party,
conference etc.
Support HD devices with HDMI input/output, include Blu-ray player, DVD player,
Support resolution: 480i@60Hz, 480P@60Hz, 576i@50Hz, 576P@50Hz,
720P@50/60Hz, 1080i@50/60Hz, 1080P@50/60Hz
Support IR remote control function to control source device content from long
Transmitter have one local loop out.
Effective Range: 50m ( Line of sight )
No cable between sender (TX) and receiver (RX)
Easy and clean installation
Plug & Play – full hardware design, no software is required
Transmission distance will be different due to the environment

Wall, brick or glass will shorten the signal cover range or cause big signal loss
480i@60Hz, 480P@60Hz, 576i@50Hz,
576P@50Hz, 720P@50/60Hz,
1080i@50/60Hz, 1080P@50/60Hz
The power adapter: DC 5V/2A

Adjust 2.4G/5GHz channel.
Video signal connection indicator
HDMI transmitter ……………………….……. 1 pcs
HDMI receiver …………………….……………. 1 pcs
Power adapter ……………………………….... 2 pcs
IR TX/RX Cable ……………..………………….. 1 set

User manual …………………………………..… 1 pcs
1、Connect the provided DC/5V power supplies to the power socket of the
transmitter and the receiver,
2、Connect an HDMI cable between the HDMI input port of transmitter and the
HDMI output port of the video source,
3、Connect the HDMI output port of receiver to the display device with HDMI cable,
4、 IR function---connect the IR TX cable to the HDMI transmitter, connect IR RX
cable to the HDMI receiver, and the IR TX must face to the controlled device.